How long is the rear seat of the Wrangler when folded down?

1 Answers
Hailey
07/25/25 9:32pm
The length of the rear seat of the Wrangler when folded down is 2460mm. The Wrangler's rear seats also support folding down, creating a relatively flat floor. The trunk dimensions include a depth of 950mm to 1870mm, a width of 1510mm, and a height of 1030mm. The Wrangler features a seat ventilation design, where designers use fans to inject air into the seats, allowing air to flow out through small holes on the seat surface to achieve ventilation. The Wrangler is equipped with a 2.0T engine, delivering a maximum power of 266 horsepower and a maximum torque of 400 Nm per meter, paired with an 8AT transmission.
Was this review help?
9
1
Share
More Forum Discussions

What is the friction coefficient of brake pads?

Brake pad friction coefficient: The friction coefficient of graphite front brake pads is 0.44 ±0.05, graphite rear brake pads is 0.37 ±0.05, and ceramic front brake pads is 0.42 ±0.05. Suitable for the Chinese market, rated as FF grade. Reasons for brake noise when not braking are as follows: 1. Use of inferior or overly hard brake pads: If inferior or overly hard brake pads are used, they will produce a squeaking noise when rubbing against the brake disc during braking. Therefore, it is essential to use high-quality brake pads when replacing them. 2. Presence of sand or foreign objects between the brake pad and brake disc: During normal driving, it is inevitable to pass through some complex road conditions. Due to the unique design of disc brakes, some sand or foreign objects may get between the brake pad and brake disc, which can also cause noise during braking.
13
4
Share

Is Antifreeze Necessary in Summer?

Antifreeze is necessary in summer, as it is not just for winter use. Vehicles should use antifreeze all year round. Antifreeze is a coolant with special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year. It also helps prevent corrosion and scale buildup, protects the engine's cooling system, improves heat dissipation, and enhances engine efficiency. Antifreeze replacement cycle: For vehicles that operate for long periods, such as taxis, high-quality antifreeze should generally be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. Long-lasting antifreeze can have a validity period of up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are found in the antifreeze, it should be replaced promptly, and the system should be cleaned.
4
3
Share

Can 10w40 engine oil be used in winter?

10w40 can be used in winter. 10w40 engine oil is generally suitable for temperatures ranging from -25°C to 40°C. In southern regions, engine oil with a viscosity grade of 30 is commonly used; in northern regions, 10W or 15W engine oil is required, and in extremely cold areas, 5W oil may be necessary. The specific details of 10w40 engine oil are as follows: Meaning of 10w: The number 10 represents the low-temperature startup performance indicator. The smaller the value, the better the low-temperature startup performance. A value of 10 indicates that the oil can ensure normal startup even at -25°C. The letter W stands for Winter, indicating that this oil is suitable for winter use. Meaning of 40: The number 40 represents the oil viscosity. The higher the value, the greater the oil's viscosity, and the better its high-temperature kinematic viscosity and high-temperature shear resistance.
12
0
Share

Is 100 Horsepower Enough?

100 horsepower is sufficient for daily driving. Horsepower determines a car's top speed performance - the higher the horsepower, the higher the engine's RPM, resulting in stronger acceleration. In other words, greater horsepower means higher maximum speed. Tests show that economical models with around 100 horsepower can fully meet daily commuting needs. Horsepower is equivalent to a car's power output, measured in imperial units (1 horsepower = 0.735kw). Higher horsepower translates to greater maximum speed. Meanwhile, higher torque means greater "force" - better burst power, faster acceleration, quicker response, and superior climbing and cornering capabilities. Currently, mainstream family cars typically feature 100-150 horsepower, mainly with 1.6L or 1.4T engines. Naturally aspirated engines produce significantly less torque, around 150 Nm, while turbocharged versions in this category can achieve 220 Nm torque output - entirely adequate for regular road driving.
16
5
Share

What does 225/55r17 mean?

225/55r17 refers to the specifications of a car tire. More details are as follows: 1. 225 indicates the tread width, 55 represents that the sidewall height is 55% of the tread width, and R17 denotes a 17-inch tire. 2. Car tire types have international standard tire codes, which express the section width and aspect ratio as a percentage in millimeters. When replacing tires, it is essential to use the same specifications as the original tires installed on the vehicle. If a car owner needs to change the tire specifications, they must go to a professional modification shop for tire upgrades or consult the car manufacturer. For small cars with displacements between 0.8-1.5, the corresponding front tire specifications range from 155/65R1373T to 175/70R1477H. For large cars with displacements between 1.6-6.0, the corresponding tire specifications range from 185/60R14 to 245/50R18.
3
5
Share

Are Highways Closed in Rainy Weather?

Highways are generally not closed during rainy days unless there are extreme weather conditions such as heavy rain, thick fog, or heavy snow. When driving on highways in the rain, you must be cautious and fasten your seatbelt because the roads are slippery, and strong winds can cause the vehicle to drift. Precautions for driving on highways are as follows: 1. Safety Check: Before getting on the road, check for potential safety hazards. Before driving on the highway, inspect your vehicle for any safety issues. 2. Fasten Seatbelts: Always fasten your seatbelt when driving on the highway, including both front and rear passengers. Avoid placing loose objects in the car. 3. Stay in One Lane: Avoid frequent lane changes on the highway—do not switch between the overtaking lane and the driving lane abruptly. Never make sudden stops or slow down without warning in the driving lane. Do not drive side by side with other vehicles, stay in the overtaking lane for extended periods, or attempt to overtake from the emergency lane. Also, prepare for lane changes in advance when exiting the highway to avoid missing the exit.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.