How long is the Mercedes-Benz E300 in meters?

2 Answers
SanMary
08/26/25 6:03am
The body length of the Mercedes-Benz E300 is 4947mm, with overall dimensions of 4947*1850*1470mm and a wheelbase of 2939mm. The Mercedes-Benz E300 belongs to the standard wheelbase version and is an imported model of Mercedes-Benz. The long wheelbase version is the Mercedes-Benz E300L, which is a domestically produced model of Mercedes-Benz. Here are more details about the imported Mercedes-Benz E-Class: 1. The imported Mercedes-Benz E-Class is divided into E260, E200, E300, and E350. Among them, the E260 uses a 1.5-liter mild hybrid system; the E260 uses a 2.0-liter low-power turbocharged engine with a maximum horsepower of 184; the E300 uses a 2.0-liter medium-power turbocharged engine with a maximum horsepower of 259; the E350 uses a 2.0-liter high-power turbocharged engine with a maximum horsepower of 259. 2. In terms of body styles, the imported Mercedes-Benz E-Class is available as a four-door five-seater sedan, a two-door four-seater coupe, and a two-door four-seater convertible. 3. In terms of transmission, the imported Mercedes-Benz E-Class is equipped with a 9-speed automatic manual transmission across the entire range. 4. In terms of drive forms, the imported Mercedes-Benz E-Class offers rear-wheel drive and four-wheel drive options. 5. In terms of suspension, the front and rear suspensions of the imported E-Class are both multi-link independent suspensions.
Was this review help?
7
3
Share
Dorothy
09/08/25 8:41am
The standard wheelbase version of the Mercedes-Benz E300 measures approximately 4.94 meters in length. As someone who frequently drives this model, I find this size particularly practical. The body is neither too long nor too short, making parking in the city less stressful, and the handling during reversing or turning is relatively agile, avoiding the bulkiness of larger SUVs. The interior space is well-designed, with ample legroom in both the front and rear seats, ensuring comfort when carrying items or traveling with family. The length has a minimal impact on the drag coefficient, providing stable performance at high speeds and decent fuel efficiency. Compared to other vehicles in the same class, such as the BMW 5 Series, which is about 4.96 meters long, the Mercedes emphasizes overall balance. I recommend measuring your garage door width before purchasing to avoid scratches in tight spaces. Overall, this length is a smart choice, balancing sportiness and everyday convenience.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What is the 0-100 km/h acceleration time of the Haval H9?

The 0-100 km/h acceleration time of the Haval H9 is 9.53 seconds. Its body structure is a mid-to-large-sized 5-door 5-seat SUV, with dimensions of 4856mm in length, 1926mm in width, and 1900mm in height, a wheelbase of 2800mm, and a fuel tank capacity of 80 liters. The Haval H9 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 165 kW and a maximum torque of 385 N·m. It is paired with an 8-speed automatic transmission and features a front-engine four-wheel-drive layout. The front suspension utilizes a double-wishbone independent suspension, while the rear suspension employs a multi-link non-independent suspension.
12
2
Share

What is the compression ratio of the Elantra 1.6 engine?

The compression ratio of the Hyundai Elantra's 1.6L Gamma G4FC engine is 10.5, and it can be fueled with 93# (Beijing 92#) gasoline. Introduction to compression ratio: To describe the technical parameters of an engine, one can generally indicate them with the size of power and torque. However, there are many factors that affect the output of power and torque, and one of the important factors is the engine's compression ratio. Importance of compression ratio: Compression ratio is a very important concept in engines. It represents the degree of gas compression, which is the ratio of the volume before compression to the volume after compression.
12
1
Share

What Are the Models of LED Car Light Bulbs?

LED car light bulb models include H1, H4, H7, H11, 9005, 9006, etc. LED car lights refer to vehicle lights that use LEDs as the light source. LEDs are characterized by high brightness, low power consumption, and long lifespan. The method to turn on the car lights is as follows: 1. Turn the left light control switch forward for the small lights; 2. Turn it forward twice for the low beams; 3. Push the light control lever forward for the high beams; 4. Lift the light control lever forward and upward for the right turn signal. Precautions for using car lights include: 1. Turn on the low beams when driving at night; 2. Do not use high beams when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic lights at night, alternate between high and low beams to signal.
1
1
Share

Where is the Honda 190 odometer sensor located?

Odometer sensor is commonly referred to as the vehicle speed sensor, which is typically installed near the output shaft of the transmission. Introduction to automobile odometer sensor: Most modern automobile odometer sensors are electronic components. The odometer sensor generally has three wires: red, black (or orange), and green (or other colors). The red wire is the power line, the black (or orange) wire is the ground line, and the other wire is the signal line, which is connected to the instrument panel. Odometer sensor testing method: Disconnect the vehicle speed sensor connector and use a multimeter in resistance mode to check the resistance value between the two leads of the sensor, which should meet the standard requirements.
12
2
Share

What is the thickness of the Octavia's anti-collision beams?

Skoda Octavia is equipped with front, rear, and side anti-collision beams. The Octavia's front and rear anti-collision beams are exceptionally robust, setting a benchmark in its class with a thickness exceeding 3mm. Side anti-collision beams: The vehicle's side structure is less sturdy than the front, as it's primarily protected only by the doors. The Skoda Octavia incorporates wide side anti-collision steel beams in the doors to absorb impact forces when the outer skin cannot withstand the collision. High-strength steel materials: The Skoda Octavia utilizes high-strength steel materials in its B-pillars and roof structure. This enhances roof strength during side collisions and extreme situations like rollover accidents, maximizing the passenger compartment's resistance to torsion and deformation upon impact.
16
1
Share

How much engine oil should be added to an Audi A8?

Generally, the engine oil should be added in about 6L. This car does not have an oil dipstick. Check the oil level in the middle screen to see if it is sufficient. After adding the engine oil: Start the vehicle, then turn it off and check after 3 minutes. Because when changing the engine oil, the oil filter also needs to be replaced, and the newly replaced oil filter does not contain oil. After starting the vehicle, the oil will flow into the oil filter. Turning off the engine for 3 minutes allows the oil to flow back into the oil pan. This will provide a more accurate reading of the oil level. Overfilling or underfilling the engine oil: Overfilling the engine oil can affect the normal operation of the crankshaft and may also increase the vehicle's fuel consumption. Underfilling the engine oil may not provide sufficient lubrication for the engine's circulation.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.