How Long Is the Interval Between Subject Two and Subject Three?

2 Answers
ArcherLee
08/29/25 3:29am
There are differences in the interval times for Subject Two, Three, and Four between small and large vehicle driver's licenses. The common scheduling intervals for C1 and C2 small vehicle driver's licenses are as follows: Subject One: After the driving school submits the registration information to the vehicle management office, the review is usually completed within 7-15 days. Once approved, you can schedule Subject One. Subject Two: You can start scheduling Subject Two 10 days after passing Subject One. Subject Three: For C1, you must wait 30 days after passing Subject One to schedule Subject Three, while for C2, you only need to wait 20 days after passing Subject One. Subject Four: Subject Four can be scheduled together with Subject Three, as it is essentially a branch of Subject Three, but it is commonly referred to as Subject Four. Subject Three Practice Notes: Master the lighting operations to avoid stalling the vehicle. Be proficient in starting procedures to prevent issues like stalling, rolling back, or forgetting to release the handbrake. During straight-line driving, keep the steering wheel steady, maintain a proper posture, and look far ahead. Be skilled in gear shifting (upshift by listening to the engine sound, downshift by watching the speed). When passing intersections, crosswalks, or bus stops, control your speed appropriately and stay observant and safe. For turn signals, such as lane changes, overtaking, U-turns, or pulling over, wait at least 3 seconds before moving. Master parking within 30 cm of the curb. Subject Three Exam Tips: Stay calm and avoid nervousness: Avoid focusing solely on the road ahead due to nervousness, which may cause you to overlook the surroundings. Many candidates make mistakes during turns or evasions under stress. Therefore, during the exam, avoid fixating on the road ahead and always observe the surroundings and rearview mirrors to prevent accidents. Familiarize yourself with the vehicle's gears: Do not overlook the basics of gear operation. Avoid instinctively looking at the gearshift when nervous, as this will result in immediate disqualification regardless of other performance. Be comfortable with the gear positions before the exam. Master clutch control: Especially during gear shifts, be proficient with the clutch pedal. React quickly to situations to leave a calm and composed impression on the examiner, increasing your chances of passing the exam.
Was this review help?
16
4
Share
DiMax
09/10/25 8:10am
I'm a new driver who just passed the Subject 2 test, and the wait for the Subject 3 exam feels like an eternity. On the day I finished Subject 2, my driving school instructor informed me that I'd have to wait 10 days before scheduling Subject 3, to ensure we complete enough road practice hours and avoid overcrowded exam slots. During those 10 days, I went to the training ground daily to simulate road conditions, especially practicing parallel parking and lane changes, since I heard Subject 3 often deducts points for minor mistakes. The instructor said this interval usually takes at least 7 days, and some schools might extend it to two weeks, depending on student numbers and appointment availability. My advice is not to waste this time—practice light operations and safety checks more to ensure smoother performance during the exam. If there's no update for too long, proactively check with the driving school to avoid missing your chance.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

Does Running a Red Light Capture the Front or Rear License Plate?

Running a red light will capture both the front and rear license plates. Electronic cameras take three photos to determine the violation: the first photo shows the vehicle crossing the stop line at the intersection with the traffic light red and the license plate visible; the second photo shows the vehicle completely past the stop line with the traffic light still red and the license plate visible; the third photo shows the vehicle continuing to move, primarily by comparing the position change from the second photo, with the traffic light red and the license plate visible. Capturing these three photos confirms the vehicle ran a red light. According to the Road Traffic Safety Law, running a red light is clearly defined as a traffic violation. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light prohibits passage, a green light permits passage, and a yellow light serves as a warning. Driving through an intersection when the light is red constitutes running a red light. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: There are two types of traffic signals: arrow lights and circular lights. If an arrow light is present, observe it first, then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited, and violating this rule will be penalized as running a red light. Brake in time: When the light turns red, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed; wait for the green light. Check the green light countdown: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown and the vehicle is close to the intersection at high speed, proceed to avoid running a red light due to delayed braking. If the vehicle is far from the intersection or moving slowly, brake immediately to stop. Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles may proceed, but turning vehicles must not impede straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without separate signals for non-motorized vehicles or pedestrians, they must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not impede other vehicles or pedestrians. Running a red light is not penalized under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the violation. Even if recorded, you can apply for reconsideration with the traffic police. Extreme weather: If visibility is so low that even electronic police cannot clearly see the traffic light, the violation evidence may be blurry, and no penalty will be issued for mistakenly running a red light. Emergencies: Transporting a critically ill patient to the hospital may involve running multiple red lights. After delivery, provide proof from the hospital or the patient to the traffic police for verification. If confirmed, the violations will be voided. If possible, call an ambulance to avoid accidents caused by running red lights. Police direction: During peak hours, traffic police may direct traffic at key intersections. Drivers must follow the officer's gestures. The traffic police department clarifies that according to the Regulations for the Implementation of the Road Traffic Safety Law, vehicles that have already crossed the stop line when the yellow light flashes may continue. If the yellow light is on and the driver speeds through, it will still be considered running a red light if captured.
15
4
Share

What is the principle of a pure steam generator?

Pure steam generator principle is as follows: Feed water is delivered to the decontamination column and the tube side of the heat exchanger via a feed pump, with the liquid level controlled by a level gauge. Industrial steam or heating water enters the heat exchanger, heating the feed water to the evaporation temperature and creating a strong thermal circulation inside the two columns. Pure steam is then generated in the evaporator (decontamination column). The low velocity of the steam and the height of the column remove any potentially impure droplets under the force of gravity. By adjusting the opening of the industrial steam inlet valve through a pneumatic regulator, the pure steam pressure can be stably maintained at the user-set pressure value, ranging between 0-3 bar.
15
5
Share

What engine and transmission does the Bestune X40 use?

Bestune X40 uses a 1.6L naturally aspirated engine, paired with either a 5-speed manual or 6-speed automatic transmission. Here are the detailed specifications of the Bestune X40: Vehicle Positioning: The Bestune X40 is positioned as a compact SUV, with dimensions of 4310mm*1780mm*1680mm and a wheelbase of 2600mm. Entertainment Features: Equipped with the newly developed D-Life vehicle connectivity system by FAW Bestune, it functions like a portable smart terminal, allowing flexible customization of various online applications such as navigation, music, radio, news, weather, and social networking.
15
2
Share

Are Fuel Additives for Carbon Deposit Removal Effective?

Using fuel additives to remove carbon deposits is ineffective. More information about fuel additives is as follows: 1. Fuel additives can only provide a certain preventive effect. They cannot soften already hardened carbon deposits and do not have a cleaning effect, so they cannot directly remove carbon deposits. 2. Based on different usage needs, fuel additives are generally categorized into three types: cleaning type, maintenance type, and performance enhancement type. 3. The cleaning and activating factors in the new generation of fuel additives can promote the removal of harmful substances such as gum in fuel and engine carbon deposits. After adding fuel additives five times consecutively, carbon deposits on the exhaust pipe will significantly decrease.
13
3
Share

Can the Transmission Fluid of the Langdong Automatic Transmission Not Be Changed?

Langdong automatic transmission fluid can be changed. What is transmission fluid: Transmission fluid is an oil product used to keep the gear system clean, ensuring the normal operation of the transmission and extending the life of the transmission device. What are the functions of transmission fluid: Reducing friction and wear, controlling the friction of the clutch and the performance of the synchronizer; bearing (low speed and high torque, vibration load), heat dissipation, reducing vibration and noise, removing pollutants at the gear meshing point (cleaning function); preventing corrosion, preventing pitting and surface metal tearing, isolating metal surfaces, and preventing direct contact between metal bodies.
7
1
Share

What is the plastic strip on the lower side of the car door called?

The plastic strip on the lower side of the car door is called a side skirt or lower skirt. Here are specific details about the side skirt: 1. The side skirt refers to the skirt panels installed on both sides of the vehicle body, functioning similarly to an air dam to reduce airflow entering the underside of the car from the sides. It has a certain aerodynamic effect and can significantly reduce air resistance under certain conditions. This part is prone to damage due to its plastic material and susceptibility to scratches and impacts. 2. The side skirt is part of the vehicle's aerodynamic kit, with aesthetics being secondary. Proper installation can reduce the reverse airflow generated during driving. At high speeds, it creates a ground effect that enhances handling stability, much like the ground is sucking the chassis. It should be used in conjunction with front and rear spoiler skirts and is essential for modifications.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.