How long is the Honda Elysion?

Why Does the Brake Squeak When Pressed?

The reasons why the brake squeaks when pressed: 1. Use of low-quality or overly hard brake pads: If low-quality or overly hard brake pads are used, they will make noise when rubbing against the brake disc during braking; 2. Presence of sand or foreign objects between the brake pad and brake disc: Due to the unique design of disc brakes, some sand and foreign objects may inevitably get between the brake pad and brake disc, which can also cause abnormal noise during braking; 3. Severe wear of the brake disc: If low-quality brake pads are used or if hard foreign objects get between the brake pad and brake disc, it can lead to abnormal wear of the brake disc. If the brake disc is severely worn, it will also produce noise when braking.

18

2

Share

How to Use the Gear Shift in Volvo XC60?

Volvo XC60 gear shift usage methods are as follows: 1. P stands for Parking gear: Use P gear when the vehicle needs to be parked for a long time or parked on a slope; 2. R stands for Reverse gear: Used when reversing the vehicle; 3. N stands for Neutral gear: Used when the vehicle is just started or being towed; 4. D stands for Drive gear: When preparing to start driving, press the brake, shift the gear lever into D gear, then release the handbrake, release the brake and press the accelerator. The Volvo XC60 is a mid-size SUV launched by Volvo Cars, with dimensions of 4688mm in length, 1902mm in width, 1658mm in height, and a wheelbase of 2865mm.

3

4

Share

How to Adjust Brake Pedal Height?

Methods for adjusting brake pedal height: 1. Disconnect the brake light wire, loosen the lock nut of the brake light switch, and rotate the brake light switch in or out according to the adjustment requirements. Measure the pedal height with a ruler until it reaches the specified value; 2. Tighten the brake light lock nut and check the contact condition between the brake light switch and the pedal to ensure the brake light is off; 3. After adjusting the pedal free height, because the length of the push rod remains unchanged after the pedal position is moved, the free travel of the pedal will change; 4. Inspection of the remaining height of the brake pedal: Place chocks under the front and rear wheels, release the parking brake, start the engine and let it run for 2 minutes. Press the brake pedal with a force of 490 N. The distance between the pedal and the floor at this time is the remaining height of the pedal. If the remaining height of the pedal is lower than the specified value for the vehicle model, it indicates that the gap between the brake shoe and drum is too large. Follow the relevant content of the wheel brake to adjust the shoe-drum gap.

18

1

Share

How to use the Jetour X70 navigation system?

Usage method of the Jetour X70 navigation system: Open the navigation system on the central control screen, set the destination, and then click start navigation. After the user arbitrarily marks two points on the in-car GPS navigation system, the navigation system will automatically design the most suitable route based on the current location. The Jetour X70 is a mid-size SUV under the Jetour brand. The dimensions of the Jetour X70 are 4720mm in length, 1900mm in width, and 1695mm in height, with a wheelbase of 2745mm. The entire Jetour X70 lineup is equipped with a 1.5-liter turbocharged engine, which delivers a maximum power of 115 kW and a maximum torque of 230 Nm.

4

2

Share

How to distinguish the front and back of an air filter?

Methods to distinguish the front and back of an air filter: The side with the arrow pointing upward is the front, which should face the airflow direction during installation. The arrow indicates the airflow direction, i.e., the installation orientation. Alternatively, you can determine the front and back by observing the surface of the air filter. Generally, the fuzzy side is the front, facing upward toward the airflow direction, while the side with supporting wire structures is the back, facing away from the airflow direction. The replacement cycle of a car's air conditioning filter depends on individual driving habits, external environment, and seasonal climate. Typically, for urban household vehicles, it should be replaced every 10,000 to 20,000 kilometers or approximately once a year. If the driving environment is poor with more dust, the air conditioning filter tends to get dirty faster, and the replacement interval should be shortened accordingly.

4

Share

What is the fuel consumption per 100 kilometers for the BMW 320i?

The fuel consumption per 100 kilometers for the BMW 320i is 8.8 liters. Below are detailed introductions about it: 1. Exterior design: The front face features BMW's signature double-kidney grille paired with a uniquely styled lower bumper, giving it a very grand and dynamic appearance. Combined with the standard LED headlights across the entire series, this 3 Series model exudes luxury. On the side profile, despite being a standard wheelbase, the body proportions are perfectly balanced, presenting an elegant look. 2. Powertrain: Equipped with a B48 2.0T turbocharged engine, it delivers a maximum horsepower of 156Ps and a peak torque of 250N.m, paired with a ZF 8-speed automatic transmission.

5

0

Share

How long is the Honda Elysion?

Why Does the Brake Squeak When Pressed?

How to Use the Gear Shift in Volvo XC60?

How to Adjust Brake Pedal Height?

How to use the Jetour X70 navigation system?

How to distinguish the front and back of an air filter?

What is the fuel consumption per 100 kilometers for the BMW 320i?

What Causes Water Dripping from a Car's Exhaust Pipe?

What is the battery capacity of the Zotye E200?

What are the symptoms of timing chain skipping teeth?

What does China National 5 vehicle emission standard mean?