How long is the first maintenance interval for the Golf?

1 Answers
McHannah
07/29/25 6:20pm
The first maintenance interval for the Golf is 5,000 kilometers or within three months from the date of purchase, whichever comes first. If the mileage is reached first, maintenance should be performed based on mileage. If the time limit is reached first, maintenance should be performed based on time. Vehicle maintenance is divided into major maintenance and minor maintenance. Major maintenance refers to replacing the engine oil, oil filter, air filter, fuel filter, and brake fluid. Minor maintenance refers to replacing the engine oil and oil filter. Minor maintenance is generally performed every 5,000 kilometers, while major maintenance depends on the vehicle's usage and mileage, typically performed between 40,000 to 60,000 kilometers.
Was this review help?
13
0
Share
More Forum Discussions

How Long After Successful Driving Test Reservation Will You Receive Notification?

Usually, you will know whether the reservation is successful after one week. Below is relevant information about Subject 2: 1. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment, referred to as the field driving skills test. The test items for cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on an S-curve. 2. For small cars, small automatic vehicles, small automatic passenger cars for the disabled, and low-speed trucks, the test items include: reversing into a garage, stopping and starting on a slope, parallel parking, driving on an S-curve, and turning at a right angle. 3. For three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles, the test items include: test piles, stopping and starting on a slope, and passing a single-plank bridge.
12
4
Share

What are the steps to replace car brake fluid?

Steps for replacing brake fluid yourself are as follows: 1. Open the hood: Park the vehicle on a flat surface, turn off the engine, open the engine compartment cover, and use a syringe to extract the fluid from the reservoir until it reaches the bottom. 2. Add brake fluid: Fill the reservoir with new brake fluid. Use a funnel during pouring to avoid spilling onto the engine compartment, as brake fluid is corrosive. 3. Remove the tire: Use a jack to lift the vehicle, starting with the rear wheels, and remove the tire. 4. Locate the bleed screw: Find the bleed screw on the brake caliper and remove the rubber dust cap. 5. Loosen the bleed screw: Use a wrench to loosen the bleed screw, attach a rubber tube to it, and connect the other end to a drain bottle. 6. Begin pressing the brake pedal: If two people are working, one can press the brake pedal while the other observes the fluid drainage. Pay attention to the color of the brake fluid in the rubber tube; old fluid is darker, while new fluid is lighter. If the fluid coming out of the tube is the lighter new fluid, the fluid replacement for that wheel is complete. Stop pressing the brake pedal, reinstall the tire, and repeat the process for the remaining three wheels.
4
4
Share

What Causes the Heater Not to Warm Up When the Water Temperature is Normal?

The correct way to use the heater is to start the engine and let it warm up first. Wait until the engine temperature gauge needle reaches the middle position before turning on the heater. However, if the heater remains cold, it indicates a problem with the vehicle's heating system. The structure of a car's heating system is relatively simple. Here are the possible reasons: 1. Start with the simplest and move to the more complex: If the heater is not warming up, the first thing to consider is whether the cabin air filter hasn't been replaced for a long time. This is the simplest yet most easily overlooked component. A dirty or clogged cabin air filter can significantly reduce airflow, thereby affecting the heating performance. 2. Insufficient coolant: This can also affect the heating function. Coolant is not only essential for cooling the engine but also serves as the heat transfer medium for the car's heating system. After absorbing heat from the engine, the coolant flows into the heater core, heating it up. Air passing through the heated core then blows out as warm air. 3. Clogged heater core: If coolant cannot flow into the heater core, or if the flow rate is reduced, it will impact the heating performance. 4. Thermostat malfunction can also affect heating: The thermostat is an automatic temperature-regulating device, similar to a water valve. It changes the circulation range of coolant to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the proper temperature range. If the thermostat fails and the main valve doesn't open, coolant cannot circulate through the radiator to dissipate heat, leading to engine overheating.
11
4
Share

Is Full Vehicle Film Necessary?

Full vehicle film is necessary. Here is relevant information about car film: 1. Functions of car film: Blocks ultraviolet rays, especially during hot summers when sunlight is intense. The film can block part of visible light and UV rays, helping to reduce interior temperature; Provides anti-explosion function; Enhances vehicle privacy by creating visual reflection when viewing from outside, making it harder to see inside. 2. Biggest disadvantage of dark film: While dark film offers better privacy protection compared to light film, in dim environments where visibility is already poor, the dark film further obstructs normal rearview mirror observation. Light-colored films obviously provide better visibility and make driving more effortless.
7
1
Share

What Are the Factors Causing Engine Vibration?

Engine vibration can be caused by the following factors: 1. Dirty air filter: Generally, it should be replaced every 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine vibration. Simply replacing the filter can solve the issue. 2. Spark plug lifespan: Spark plugs have a limited lifespan. After 30,000 to 40,000 kilometers, their ignition efficiency significantly decreases, affecting ignition. This is one of the most common issues, and replacing all spark plugs can resolve it. 3. Low idle speed: If the idle speed is too low and causes vibration, it indicates that it is beyond the control range of the computer. 4. Abnormal water temperature: High water temperature can cause early ignition timing, changes in the air-fuel mixture ratio, thinning of engine oil viscosity, and reduced lubrication performance. 5. Clogged fuel injectors: Impurities in gasoline can clog the injector nozzles, leading to inconsistent fuel injection among injectors. This causes uneven cylinder operation and engine vibration. 6. Carbon deposits and oil sludge clogging: Over time, carbon deposits and oil sludge can accumulate in the throttle body, idle valve, and intake ports, obstructing airflow and affecting idle stability, leading to vibration. 7. Low cylinder pressure: Engines come in 3-cylinder, 4-cylinder, 5-cylinder, 6-cylinder, and 8-cylinder configurations. If one cylinder is not functioning properly, it can result in a misfire, causing engine vibration.
17
0
Share

How to Prevent Mice from Entering the Car Engine Compartment?

Do not park the vehicle in areas prone to rodent infestation; maintain cleanliness of your vehicle; place rodent repellent packets or camphor in the engine compartment. Below are relevant details on preventing mice from entering the car engine compartment: 1. Reasons why mice enter the engine compartment: Cars often parked near garbage dumps or trash cans, where leftover food attracts mice to enter the engine compartment for feeding; during colder seasons like winter and spring, mice seek warmth in the engine compartment. 2. Methods to handle mice in the car: If mouse droppings and urine are found, take the car to a detailing shop for engine cleaning, and preferably perform an engine wiring harness maintenance, which both preserves the harness and repels mice, achieving two goals at once. If wiring or hoses are chewed, promptly visit an auto repair shop for repairs or replacements to prevent accidents. If mice are found in the engine compartment, immediately change the parking location and clean the engine.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.