How Long Is the Exhaust Pipe Warranty?

1 Answers
ElleAnn
07/30/25 12:29am
Exhaust pipe warranties generally last 5-8 years. Introduction to Automotive Exhaust Pipes: Automotive exhaust bellows, also known as exhaust pipe flexible hoses, are installed between the engine exhaust manifold and the muffler. They provide flexible connections for the entire exhaust system, serving to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. Hazards of Exhaust Pipe Leaks: Leaks in the exhaust pipe can cause excessively loud exhaust noises and may lead to yellowing at the muffler connection points. Additionally, driving at low gears with heavy loads should be avoided, as it can cause varying degrees of damage to both the engine and the muffler.
Was this review help?
7
4
Share
More Forum Discussions

Is the JAC Volkswagen Sehol's Engine Made by Volkswagen?

Sehol's engine is a domestically produced engine manufactured by the JAC Group. Sehol is a new brand established through the cooperation between JAC Motors and Volkswagen. Therefore, its engine is not from Volkswagen. The engine model used by Sehol is the HFC4GC1.6E, with a maximum horsepower of 184, a maximum power output of 135KW, a maximum power speed of 5500rpm, and a peak torque of 300N.m. For daily maintenance of Sehol's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB_CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder from part wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates from the oil, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
7
0
Share

What is the fuel consumption per 100 kilometers for the Volkswagen Bora?

The comprehensive fuel consumption of the Volkswagen Bora is 5.3-5.9L/100km. Currently, there are 15 models of the Volkswagen Bora on sale. The DSG Comfort Smart Connect Edition and DSG Elite Smart Connect Edition have a comprehensive fuel consumption of 5.3L/100km. The DSG Elite Smart Connect Edition and DSG Luxury Smart Connect Edition have a comprehensive fuel consumption of 5.5L/100km. The Automatic 30th Anniversary Edition, Automatic Comfort Smart Connect Edition, Automatic Elite Smart Connect Edition, Automatic Luxury Smart Connect Edition, and Automatic Fashion Smart Connect Edition have a comprehensive fuel consumption of 5.7L/100km. The Manual Fashion Smart Connect Edition, Manual Comfort Smart Connect Edition, Manual Fashion Type National VI, and Manual Leading Type National VI have a comprehensive fuel consumption of 5.8L/100km. The Automatic Fashion Type National VI and Automatic Leading Type National VI have a comprehensive fuel consumption of 5.9L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 5.3-8.8L/100km. When driving, the following five tips can help reduce fuel consumption: 1. During the starting process, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this will multiply fuel consumption. 2. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and applying slow and uniform acceleration or braking, fuel economy can be improved by up to 20%. 3. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. 4. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon deposits (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the mileage. 5. Close the windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
18
4
Share

Must the ETC applicant be the vehicle owner?

It is not mandatory for the vehicle owner to apply for ETC. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Expressways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and photocopy of the vehicle license, and the page of the vehicle license with the latest annual inspection stamp are required. If applying on behalf of others, the original valid ID card of the agent is also required. If applying for ETC through major bank branches, a debit card or credit card from the corresponding bank must be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding ETC with a debit card. ETC charging principle: There will be one or more ETC lanes on the expressway. Through the dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, and using computer networking technology for backend settlement with the bank, the vehicle can pay the toll without stopping at the toll station. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through the toll station without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban agglomerations will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set the target in the main indicators of the "13th Five-Year" comprehensive transportation development to "achieve a 50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the usage rate of ETC passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a stationary vehicle ahead, to prevent the ETC device failure of the vehicle ahead or the absence of an ETC device, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle ahead. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, leading to charging failure. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. For non-human-caused loosening or detachment, reactivation is sufficient. When using a debit card bound to ETC, insufficient balance will also cause charging failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield can cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
4
3
Share

What is the ECT PWR in Toyota Land Cruiser?

ECT PWR is a switch for the transmission's electronic control mode (sport mode). Below is an introduction to the transmission: 1. Functions of the transmission: (1) Change the transmission ratio between the engine and the wheels, allowing the engine to operate under optimal conditions, expanding the torque and speed transmitted to the drive wheels, and achieving different speeds; (2) Enable the vehicle to reverse; (3) Provide a neutral gear. 2. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types.
19
0
Share

How much tire pressure should a motorcycle have?

Front tire pressure should be 2 bar, rear tire pressure should be 2.5 bar. Standard motorcycle tire pressure: Motorcycle tire pressure is generally normal between 2.2-2.5 bar. Front tire pressure can be maintained at 2.2 bar, while rear tire pressure can be kept at 2.5 bar. Introduction to motorcycle tire pressure: Motorcycle tire pressure is quite important during regular use. If the tire pressure is too low, it will increase rolling resistance. If the tire pressure is too high, it will not only affect the vehicle's grip but also pose a risk of tire blowout. Therefore, proper tire pressure is crucial.
14
2
Share

What are the causes of oil leakage in the Reiz engine?

Introduction to the causes of engine oil leakage is as follows: 1. Possible design issues: Poor quality, material, or craftsmanship of the components themselves, or structural design problems can all cause engine oil leakage; In summer, when the engine temperature is too high, prolonged exposure to high temperatures can lead to the aging of oil seals and gaskets, thereby reducing sealing performance and causing oil leakage. 2. Possible external force effects: Fastening screws are affected by the principle of thermal expansion and contraction, resulting in uneven tightening force, loosening, or thread stripping; External impacts or collisions can cause deformation of internal engine parts, leading to engine oil leakage.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.