How long is the break-in period for the Trumpchi GS4?

1 Answers
JohnLee
07/29/25 8:16pm
The break-in period for the Trumpchi GS4 is 1,500 kilometers. Here are the precautions to take for a new car during the break-in period: 1. The engine speed should not be too high, preferably not exceeding 2,500 RPM, with an ideal speed range of 60-90 km/h. 2. During a cold start, allow the engine to warm up before driving—wait until the water temperature changes, typically 2-3 minutes; in summer, when temperatures are high, warming up for about 1 minute is sufficient. 3. Avoid sudden acceleration and hard braking, and try to maintain a steady speed. 4. The maximum speed of the vehicle during the break-in period should not exceed 100 km/h, but prolonged low-speed driving should also be avoided—pay attention to gear changes. 5. Avoid overloading the car with passengers or cargo.
Was this review help?
5
2
Share
More Forum Discussions

What Are the Reasons for a New Car Battery to Be Dead?

The reasons for a new car battery to be dead may include abnormal battery modifications or faulty electrical connections. Below is a detailed introduction about car batteries: 1. Overview: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, car batteries refer to lead-acid batteries, which are mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte. 2. Others: The plates of a conventional battery are composed of lead and lead oxides, with the electrolyte being an aqueous solution of sulfuric acid. Its main advantages are stable voltage and low cost; the disadvantages include low specific energy (i.e., the amount of electrical energy stored per kilogram of the battery), short service life, and frequent maintenance requirements.
20
5
Share

How many cylinders does the MG6 have?

The MG6 has four cylinders. It is a compact car. Taking the 2020 MG6 as an example, its body structure is a five-door, five-seat hatchback with dimensions of 4704mm in length, 1848mm in width, and 1466mm in height, a wheelbase of 2715mm, a fuel tank capacity of 50 liters, and a curb weight of 1300kg. The 2020 MG6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 181PS, a maximum power of 133kW, and a maximum torque of 285Nm, paired with a 6-speed manual transmission.
12
2
Share

What is the body length of the Haval F7?

The body length of the Haval F7 is 4620mm, the width is 1846mm, and the height is 1690mm. Taking the 2021 Haval F7 as an example, it belongs to the compact SUV category, with a wheelbase of 2725mm, a fuel tank capacity of 55 liters, and a body weight of 1610kg. The 2021 Haval F7 features a front suspension with a MacPherson independent suspension and a rear suspension with a double-wishbone independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 285nm, paired with a 7-speed dual-clutch transmission.
18
0
Share

Can a lost vehicle license be handled by an agent?

Yes, a lost vehicle license can be handled by an agent. Below is detailed information about vehicle licenses: 1. Overview: The motor vehicle license is the legal document permitting a motor vehicle to drive on roads within China. The license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the stamped certificate core, while the back has the vehicle's photo, sealed in plastic. The supplementary page is also a stamped certificate core. 2. Relevant regulations: Article 17 of the 'Road Traffic Management Regulations' issued by the State Council stipulates that vehicles must pass inspection by the vehicle management authority and obtain license plates and a vehicle license before they are permitted to drive. Therefore, possessing a 'Motor Vehicle License' is one of the prerequisites for a vehicle to be driven on the road, and driving without the license is a violation of regulations.
2
4
Share

What are the symptoms of a faulty Honda knock sensor?

Here are the related symptoms of a faulty knock sensor: 1. Engine ignition timing advance angle: During engine operation, excessive ignition timing advance (ignition advance angle), engine load, temperature, and fuel quality can cause engine knocking. When knocking occurs, as the gas combusts before the piston reaches top dead center, mild cases produce noise and reduce engine power, while severe cases can damage the engine's mechanical components. 2. Damaged knock sensor: If the knock sensor is damaged, the engine control unit (ECU) cannot monitor the degree of knocking. When the ECU detects engine knocking through the knock sensor, it reduces the ignition advance angle. However, with a faulty sensor, the ECU may mistakenly determine no knocking is occurring. In this case, the ECU will increase the ignition advance angle, causing the engine to operate roughly and vibrate due to knocking.
1
0
Share

How Does a Car Reverse Radar System Work?

The working principle of a car reverse radar system is: under the control of the controller, the sensor emits ultrasonic signals. When encountering an obstacle, an echo signal is generated. After the sensor receives the echo signal, the controller processes the data to determine the position of the obstacle. The distance is then displayed on the display, and a warning signal is issued to achieve the purpose of safe parking. Reasons why the reverse radar may not work include: 1. Faulty buzzer or display; 2. Damaged reverse radar wiring; 3. Loose connection between the buzzer or display and the main unit. Solutions for a non-functioning reverse radar are: 1. Replace the buzzer or display; 2. Inspect and reconnect the reverse radar wiring; 3. Tighten the connection between the buzzer or display and the main unit.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.