How long is the break-in period for a new Leiling car?

2 Answers
LaPeyton
07/29/25 7:28am
Generally speaking, a new Leiling car is considered to be in the break-in period before reaching 5,000 kilometers. The break-in period for a new car has the following characteristics: 1. More driving issues: Due to factors such as improper assembly of parts, new cars tend to experience more driving issues during the break-in period. 2. Higher fuel consumption: To ensure the new car operates under light load during the break-in period, carburetor-equipped cars are fitted with speed limiters, which can easily cause the air-fuel mixture to become too rich, thereby increasing fuel consumption. 3. Lubricating oil deteriorates easily: During the break-in period, the rough surfaces of parts and the small gaps between them can cause the lubricating oil temperature to rise. Additionally, many metal shavings are worn off and fall into the lubricating oil, making it prone to oxidation and deterioration.
Was this review help?
18
5
Share
RichardLynn
08/12/25 10:46am
Driving a new Corolla, the break-in period really requires some attention. As we often say, a new car is like an athlete warming up before a game—the first 1,600 kilometers are crucial. When driving normally, don’t be too aggressive; it’s best not to constantly push the speed too high, and keep the RPMs moderate, avoiding prolonged periods above 3,000 RPM. Change the oil in the first 500 kilometers? No need! But don’t delay the first maintenance at 10,000 kilometers. A key reminder: right after picking up the car, avoid hauling heavy loads or flooring the accelerator for sudden acceleration. This ensures a smoother break-in for the engine, transmission gears, and bearings, preventing premature wear that could affect future performance and fuel efficiency. By the way, highway driving is fine, but don’t cruise at the maximum speed for extended periods.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Where is the keyhole of the Zotye e200?

Zotye e200 keyhole is installed on the driver's side door. You can see the keyhole by prying open the rear cover of the left outer handle with the key. If the one-button start fails, you can use the mechanical key to open the door. Just pull the safety on the back of the key to remove the mechanical key. The Zotye e200 is a mini electric vehicle, with an overall shape similar to the smart, looking compact and agile. The front headlights of the Zotye e200 are angular, and the body adopts a two-tone color scheme, which is very stylish. The length, width, and height of the e200 are 2735mm, 1600mm, and 1630mm respectively, with a wheelbase of 1810mm.
7
5
Share

Where is the Bluetooth button on the Camry?

Camry's Bluetooth button is located on the multifunction steering wheel. The Bluetooth hands-free system is specifically designed for driving safety and comfort, with the main function of enabling drivers and passengers to make calls and interact with multimedia without the need for cables or phone holders. Once the car's Bluetooth is successfully connected to a mobile phone, calls can be made and received via the vehicle's Bluetooth system. The Camry is a model under GAC Toyota, equipped with either a 2.0L or 2.5L engine. Its body dimensions are 4855mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. A total of 10 variants are available.
11
3
Share

Under What Circumstances Will a Car Alarm Trigger?

Car alarms will trigger in cases of illegal door opening, ignition attempts, vibrations, or system tampering. Below is an introduction to car alarm-related information: Basic Information: A car alarm is an alert device installed in vehicles. If someone strikes, impacts, or moves the car, sensors send signals to the controller indicating vibration intensity. Depending on the vibration level, the controller emits warning sounds or activates a full alarm. This serves to deter thieves and alert the vehicle owner. Development Trends: From the 1990s to the present, car alarms have rapidly evolved with increasingly widespread applications. As car alarm technology matures, cost control is no longer a challenge, making car alarms essential equipment for every vehicle owner. In the next decade, onboard GPS receivers will open vast possibilities in the security field.
6
1
Share

Why does the Nissan Tiida key fault light stay on?

It is necessary to check whether the battery power of the remote control is insufficient. The following is the explanation of the car fault code: 1. Car fault code: The car fault code is the fault code reflected by the car computer ECU after the car has a fault. Therefore, the car has a fault at this time and the fault light stays on at this time. To completely eliminate the fault, a professional decoder (K81, laptop computer, etc.) is required to decode, which is commonly referred to as fault elimination. 2. Types of fault codes: Fault codes include real codes, historical codes and sporadic codes. Real codes are easy to check. Historical codes, as the name implies, are fault codes left over from the past that have not been cleared, but sporadic fault codes are not fixed.
10
3
Share

What are the tips for using paddle shifters?

Tips for using paddle shifters: 1. Depress the clutch and release the accelerator; 2. Quickly shift the gear lever from second to third gear; 3. Observe the engine tachometer, and when the RPM drops to 1,686, follow the clutch release operation to enter the semi-clutch state. As a quick shifting device, paddle shifters can enhance driving operability to a certain extent. When operating paddle shifters, drivers generally only need to shift into D, S, or manual mode. With paddle shifters, drivers can complete gear shifts without taking their hands off the steering wheel. Automatic transmission vehicles equipped with paddle shifters are undoubtedly semi-automatic, because the function of paddle shifters is to shift up or down. Although manual mode is used, the essence of the transmission remains an automatic transmission.
20
0
Share

What Causes Wavy Patterns in Car Paint Reflections?

Wavy patterns in car paint reflections are mainly caused by the following symptoms and their corresponding solutions: 1. Dirt Spots: This occurs when the paint booth is not properly cleaned during the painting process, leading to imperfections after painting. The general repair method involves sanding and polishing the paint surface. If the dirt spots are large or located in the underlying layers, a rework may be necessary. 2. Water Spots: This issue arises due to environmental humidity and inadequate maintenance of the air pump, which causes water accumulation in the painting lines. Typically, this problem is addressed by sanding and polishing based on the paint thickness. Otherwise, a rework might be required. 3. Solution: Glue Repair. As described above, if transparent spots appear, it means the painter has found small pits or dirt spots on the paint surface after painting and has used glue drops for repair.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.