How Long is the Break-in Period for a New Car?

What Causes Diesel Engine Reverse Rotation?

The reasons for diesel engine reverse rotation are: 1. Overly advanced fuel injection timing: The fuel injector sprays diesel into the cylinder before the piston reaches the compression top dead center. The combustion of diesel pushes the piston downward, causing the crankshaft to rotate in reverse. This situation can be corrected by adjusting the fuel injection advance angle according to specifications when the diesel engine is shut down. 2. Excessive compression ratio: Incomplete combustion of diesel or engine oil forms carbon deposits in the combustion chamber, reducing its volume and increasing the compression ratio. During hand-cranking startup, the piston fails to pass the top dead center, causing reverse ignition. This can be resolved by removing carbon deposits to ensure a normal compression ratio. 3. Low fuel injector pressure: Insufficient fuel injector pressure leads to premature injection and combustion, resulting in engine reverse rotation. The fuel injector pressure should be checked and adjusted to meet specified values. 4. Excessive hand-cranking before startup: Too much diesel accumulates in the cylinder, causing premature combustion during startup and leading to reverse engine operation.

11

4

Share

What are the reasons for poor cooling performance of Audi air conditioning?

Audi air conditioning's poor cooling performance may be due to insufficient refrigerant in the air conditioning system, resulting in reduced cooling efficiency. You can check components such as the pipelines, air conditioning pump, condenser, and evaporator in the air conditioning system for any damage that might cause refrigerant leakage. The following are the functions of car air conditioning: 1. Temperature regulation: This is the main function of car air conditioning. In summer, the cooling system produces cold air to lower the temperature inside the cabin; in winter, except for large commercial vehicles that use independent combustion heaters for heating, most other vehicles utilize the car's residual heat for heating. 2. Humidity regulation: Humidity greatly affects passenger comfort. The humidity inside the cabin should generally be maintained between 30% and 70%. Ordinary car air conditioners do not have the function to regulate cabin humidity; this can only be achieved by using ventilation systems or advanced luxury cars equipped with integrated heating and cooling air conditioners. 3. Airflow regulation: The speed and direction of airflow significantly impact human comfort. If air is blown directly, the speed should be limited within a certain range when the temperature is appropriate. The airflow speed can be adjusted based on passengers' living environment, age, health condition, and temperature preferences. 4. Air purification: The quality of air inside the cabin is crucial for ensuring comfort.

9

0

Share

Where is the fuel filler button on the Buick LaCrosse?

The fuel filler cap switch of the new Buick LaCrosse is located at the lower left side of the driver's seat. The LaCrosse is a new mid-to-high-end sedan launched by SAIC-GM in 2006. The name "LaCrosse" symbolizes high-grade and high-class imagery, with "La" representing elegance and "Crosse" embodying the meaning of "breakthrough and transcendence." Below is an introduction to the Buick LaCrosse: 1. Vehicle Design The Buick LaCrosse adopts Buick's latest family design language, featuring smooth and elegant body lines and a dynamic body proportion. With a length of 5026mm, width of 1866mm, height of 1462mm, and an ultra-long wheelbase of 2905mm, it offers a spacious and luxurious driving and riding space typical of a large premium sedan, providing a comfortable and relaxed seating posture. The interior includes 29 practical storage spaces for easy organization of commonly used items and handbags. 2. Powertrain The 2021 Buick LaCrosse family is equipped with two sets of drivetrain systems, delivering both powerful performance and excellent fuel economy, while fully complying with the "China 6b" emission standards. Among them, the newly added 552T Luxury model is powered by a 1.5T SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission. It features smooth and abundant power, high torque at low speeds, and high power at high speeds, achieving a maximum power of 124kW/5600rpm and a maximum torque of 250Nm within a broad rpm range of 1700-4400rpm. The fuel consumption is only 6.5L per 100km.

7

0

Share

Where are the front and rear side airbags located?

Front and rear side airbags are installed on the outer side of the seats. Front side airbags: Front side airbags are generally installed on the outer side of the front seats, aiming to mitigate injuries caused by side impacts and prevent direct collision between the torso and the door panel. They effectively protect the safety of front passengers, and currently, some high-end or high-configuration models are equipped with front side airbags. Rear side airbags: Many manufacturers' models come standard with side airbags for the two front seats, while models equipped with rear side airbags are relatively rare. In the event of a collision, especially a side impact, rear side airbags can help reduce physical injuries such as fractures caused by the direct hard impact between the rear passengers' arms and ribs near the door side and the door panel.

9

4

Share

Is There Insurance Coverage for Cars Submerged in Floods?

According to the relevant provisions of China's motor vehicle insurance clauses, vehicle damage caused by natural disasters such as heavy rain and floods falls under the coverage of the commercial auto insurance's vehicle damage insurance. Therefore, expenses incurred from rescue operations, cleaning costs, electrical damage, and interior damage after a vehicle is submerged are all covered by the vehicle damage insurance, and the insurance company should provide compensation. Insurance Requirements: Compensation is only available if the vehicle is insured under the commercial auto insurance's vehicle damage insurance. Vehicles insured only with compulsory traffic insurance or commercial third-party liability insurance are not eligible for compensation. Coverage Details: The compensation scope of vehicle damage insurance includes rescue expenses, cleaning costs, and damage to electrical components or interior parts. However, engine damage caused by submersion in water or driving through water is excluded from coverage.

4

2

Share

What are the tips and rhymes for the B1 Subject 2 driving test?

B1 Subject 2 driving test tips and rhymes are as follows: 1. Reverse parking: Reversing into the garage is not difficult, fasten the seatbelt, shift into gear, flash the left turn signal, press the clutch, release the handbrake, slowly lift the clutch to start smoothly, adjust the car body by looking at the right line, align the left mirror's vertical gap with the right line, stop when the front horizontal line is at shoulder level, shift into reverse gear, release the clutch, cover the horizontal line corner with the left mirror, turn the steering wheel fully to the right, wait for the garage line in the left mirror, turn the steering wheel back one circle when the angle is 30 degrees, wait until the car is parallel to the line, straighten the steering wheel by turning it two full circles, cover the front corner of the garage with the left mirror, press the clutch and brake, shift into first gear to exit the garage, turn the steering wheel fully to the left when the car head touches the line, stop the car when the car head covers the line, keep the steering wheel unchanged and reverse the car, wait for the garage line in the right mirror, turn the steering wheel back one circle when the angle is 30 degrees, wait until the car is parallel to the line, straighten the steering wheel by turning it two full circles, cover the front corner of the garage with the left mirror, press the clutch and brake, shift into first gear to exit the garage, turn the steering wheel fully to the right when the car head touches the line, stop the car when the car head covers the line, adjust the car body skillfully. 2. Slope parking and starting: Relax when starting on a slope, align the right line with the middle of the wiper, align the middle axis with the white line, adjust the car body and look at the right mirror, less than thirty centimeters is good, start slowly and look at the left mirror, press the brake when the left mirror covers the line, pull the handbrake and don't stall, press the foot brake and release the handbrake, lift the left hand to turn on the signal, gently lift the clutch, release the foot brake when the sound changes, the car moves slowly forward, slope starting is completed. 3. Right-angle turn: Slow down to first gear before the turn, aligning the car body is key, thirty centimeters from the left is good, remember not to press the line, when the car head approaches the turning point, turn the steering wheel to the left without delay, look at the rear wheel in the rearview mirror, turn the steering wheel back without panic. 4. Curve driving: Enter the curve with the car head, aim closely with the left edge and right line, keep the left edge close to the right line, turn the steering wheel back when touching the left line, move the left line to the middle of the car head, turn the steering wheel one circle steadily, when the right edge is about to touch the left line, aim with half a circle of the steering wheel. 5. Parallel parking: Parallel parking is on the right, aim the middle axis at the right line, drive slowly past the right corner, look at the right mirror when reversing, cover the right corner and turn the steering wheel fully to the right, look at the left line until it reaches the middle, turn the steering wheel two full circles to the left, then look at the left rear mirror, turn the steering wheel fully to the right when the rear wheel presses the line, wait until the car body is parallel to the garage line, stop the car and shift into first gear, don't forget to flash the left turn signal, slowly lift the clutch and look at the left corner, turn the steering wheel back one circle when touching the left line, turn the steering wheel back two circles when the line reaches the middle, the car exits the garage and the task is completed.

1

0

Share

How Long is the Break-in Period for a New Car?

What Causes Diesel Engine Reverse Rotation?

What are the reasons for poor cooling performance of Audi air conditioning?

Where is the fuel filler button on the Buick LaCrosse?

Where are the front and rear side airbags located?

Is There Insurance Coverage for Cars Submerged in Floods?

What are the tips and rhymes for the B1 Subject 2 driving test?

How long does the Crown V6 engine last?

How to Clean Alcantara Suede?

At what position should the steering wheel be turned when making a U-turn?

Can motor vehicle deregistration be processed online?