How long is the battery warranty for the 2020 XPeng G3?

What are the disadvantages of modified blow-off valves?

Modified blow-off valves are usually installed externally and do not provide any improvement to the car's power. They also generate significant noise and may develop leaks over time. Below is a detailed introduction to blow-off valves: 1. Blow-off valves automatically open and close based on the system's working pressure and are typically installed on equipment or pipelines in closed systems to protect system safety. 2. When the pressure inside the equipment or pipeline exceeds the set pressure of the blow-off valve, it automatically opens to relieve pressure, ensuring that the medium pressure remains below the set level to protect the equipment and pipeline and prevent accidents. 3. Blow-off valves can be categorized into several types, including intake blow-off valves and exhaust blow-off valves, with the latter further divided into internal and external types.

20

5

Share

What are the reasons for the lack of power when accelerating by stepping on the throttle in Lavida?

The reasons for the lack of power when accelerating by stepping on the throttle in Lavida include incorrect engine oil amount, mismatch between engine oil and the engine, excessive engine carbon deposits, etc. The corresponding solutions are as follows: Incorrect engine oil amount. When changing the engine oil, there is a specified standard. If too much engine oil is added, the crankshaft will have more difficulty operating, requiring greater power to push, resulting in weak acceleration. Excessive engine oil may lead to oil leakage into the combustion chamber, causing rapid oil consumption and engine carbon deposits, which also harms the engine. Insufficient engine oil means parts won't get enough lubrication, reducing power. Check the oil level with a dipstick and add oil to slightly above the middle line. This ensures engine lubrication without putting too much pressure on the crankshaft. Mismatch between engine oil and the engine. Different engines require different engine oils. If acceleration becomes weak after changing the oil, it might be due to a mismatch. High viscosity makes crankshaft operation difficult, while low viscosity means the engine isn't suited for that oil, leading to noise. It is recommended to change the oil again, following the oil standards in the car manual. Clogged oil filter and severe carbon deposits. When changing the engine oil, the oil filter should generally be replaced as well. If the oil filter is clogged but not replaced in time, the oil will bypass through the relief valve, resulting in reduced car power and increased engine wear.

15

2

Share

Where to Add Engine Oil in a Car?

Engine oil filler port is generally located on the left side of the engine. Under the yellow circular cap on the engine cylinder head is the oil filler port. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Below is a detailed introduction to automotive engine oil: 1. Engine oil consists of two parts: base oil and additives. Base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of base oil performance, endowing it with certain new characteristics, making them an essential part of lubricating oil. 2. The engine is the heart of a car, containing many metal surfaces that move against each other. These components operate at high speeds, in harsh environments, with working temperatures reaching 400°C to 600°C. Under such severe operating conditions, only qualified lubricating oil can reduce engine component wear and extend service life.

11

4

Share

How to Control the Throttle to Maintain a Fixed Speed?

You can control the vehicle's speed by adjusting the pressure applied to the throttle pedal. Below are the relevant details: 1. The car throttle controls the opening of the engine throttle valve, which in turn regulates the engine's air intake and fuel injection, thereby controlling the engine's RPM. To maintain the speed within a specific range, you can refer to the semi-engagement method of the clutch—lightly press and slowly release the throttle. 2. In fact, to keep the speed within a certain range, you can take cues from the clutch's semi-engagement. For example, if you want to maintain a speed of 60 KM/h, adopt the pedal posture mentioned above, support your heel, and hold steady. Remember, the throttle must be coordinated with the brake and clutch, so always press lightly and release slowly, ensuring smooth and even operation.

19

4

Share

What Causes the Yellow Light on the Dashboard to Illuminate?

The yellow exclamation mark on the dashboard is an alarm signal from the tire pressure monitoring device, indicating that the tire pressure is too low, possibly due to a leak or prolonged lack of inflation. There are generally three types of exclamation warning lights on the car dashboard: 1. A triangle with an exclamation mark in the middle, which is a general fault indicator light. This light is the TCS (Traction Control System) indicator. When this light comes on, it reminds the driver to turn off the traction control system. If the light stays on while the traction control system is active, it indicates a problem with the TCS. 2. A circle with an exclamation mark inside, which is the brake system warning light. It indicates that the parking brake (handbrake) is engaged or there is a fault in the brake system. 3. A horizontal line with an exclamation mark below, which is the tire pressure monitoring warning light. This light illuminates when the pressure in one of the vehicle's tires is too low.

16

2

Share

Where is the engine air intake located?

The location of the engine air intake varies depending on the vehicle model. Some are positioned at the front of the engine, while others are at the rear. You can trace it by following the air filter. Although intake designs differ, their function remains the same: to supply fresh air to the engine and provide ventilation for cooling heat sources such as the air conditioning condenser, radiator, and oil cooler. Here's more information about air intakes: 1. Whether an intake is designed as a single or dual-layer structure primarily depends on visual styling requirements, as the front grille (i.e., the air intake) at the vehicle's visual focal point best represents brand characteristics; 2. Some intakes are positioned on the hood, which is common practice for turbocharged engine models to cool the intercooler located atop the engine, hence the hood opening.

6

3

Share

How long is the battery warranty for the 2020 XPeng G3?

What are the disadvantages of modified blow-off valves?

What are the reasons for the lack of power when accelerating by stepping on the throttle in Lavida?

Where to Add Engine Oil in a Car?

How to Control the Throttle to Maintain a Fixed Speed?

What Causes the Yellow Light on the Dashboard to Illuminate?

Where is the engine air intake located?

What Causes Hard Braking Due to the Focus Intake Manifold?

What are the reasons for the JMC Transit's throttle not accelerating?

What are the causes of Cadillac rearview camera failure?

Is the Golf a B-segment car?