How Long is the Battery Warranty for FAW-Volkswagen Tayron?

What are the reasons why the vehicle steering wheel does not automatically return to center?

Reasons why the vehicle steering wheel does not automatically return to center: 1. Damaged steering gear: When the car's steering gear is damaged, symptoms such as difficulty in steering or the inability of the steering wheel to automatically return to center may occur. In this case, the steering gear's clearance needs to be readjusted, and lubricating oil should be applied for lubrication. 2. Damaged suspension bushings: If the car's suspension bushings are damaged, it will exacerbate the wear on the inner side of the vehicle tires and affect the automatic return-to-center function of the steering wheel. In this situation, new suspension bushings should be replaced. 3. Incorrect toe-in value: If the car's toe-in value is incorrect after replacing the tires without performing a four-wheel alignment, it will prevent the two sides of the tires from achieving a parallel state. As a result, the car will not automatically return to center due to resistance during steering. In this case, a four-wheel alignment should be performed again, and the toe-in value should be adjusted.

4

0

Share

Which of the Three Engine Mounts is More Prone to Failure?

Generally, the right-side engine mount is more prone to failure. Below are the impacts of a failed engine mount: 1. Idle steering wheel vibration, body shaking, and loud body resonance noise; The engine mount is an elastic structure that connects the engine to the vehicle frame, significantly reducing the vibration and discomfort transmitted from the engine to the body during operation, thereby preventing premature damage to other vehicle components. 2. In ordinary cars, the engine mount consists of rubber elastic blocks with two independent screws installed above and below. The upper screw is attached to the engine, while the lower screw is fixed to the vehicle frame, relying on the middle rubber block for elastic cushioning. In more advanced vehicles, the engine mount also includes a controllable hydraulic device, where the computer adjusts the hydraulic pressure to adapt the elastic hardness according to different driving speeds.

17

2

Share

What are the effects of turning on the cold air without AC?

If the car turns on the cold air mode without activating the AC, the cooling effect will not reach the optimal expectation. The AC switch controls the compressor, which is one of the main components of the car's air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. The usage method of car AC is as follows: 1. In hot summer, when turning on the AC button, you need to adjust the temperature to the blue position. For automatic air conditioning, you can set a temperature and then press the auto button. The automatic air conditioning will adjust the interior temperature based on the external and internal temperatures. 2. Direct the air vents slightly upward, utilizing the principle that hot air rises and cold air sinks. As the cold air descends, it can quickly cool the interior. Also, avoid placing decorations in front of the air vents as they may affect the cooling efficiency.

12

4

Share

What does the elephant on the highway sign mean?

The elephant sign on the highway is to remind drivers to stay alert while driving at high speeds to prevent elephants crossing the highway. The specific details are as follows: 1. These elephant signs mainly appear in the Xishuangbanna area of Yunnan Province. 2. Due to tourism, Xishuangbanna has a large number of domesticated elephants, as well as a rich population of wild elephants. Therefore, drivers should be cautious of elephant activity when passing through this area. Here is additional information about other signs: 1. If you see a triangular sign with a cow in the suburbs, it means drivers should be aware of livestock crossing, indicating the presence of herders or livestock farms nearby. 2. If you see a triangular sign with a deer, it is mainly found in areas where wild animals frequently appear. These animals include deer, wild boars, pandas, etc., reminding drivers to be cautious of wildlife crossing and to slow down to avoid them.

3

Share

What Does the Yellow Exclamation Mark on the Car Dashboard Mean?

When a yellow exclamation mark appears on the car dashboard, it can indicate one of four possible issues: general faults, automatic transmission faults, abnormal tire pressure, or lighting faults. Below is a detailed analysis of these four scenarios: General Faults: An exclamation mark inside a triangle indicates a malfunction in the car's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor issues. It is recommended to visit a 4S shop for inspection to identify the source of the problem. Automatic Transmission Faults: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid levels. Immediate replacement of transmission fluid is required. Abnormal Tire Pressure: An exclamation mark inside a horizontal line beneath a parenthesis represents the tire pressure monitoring warning light. This light turns on when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Faults: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a brake system warning, typically due to brake system failure or low brake fluid levels. Immediate inspection of the brake system is necessary to prevent accidents.

7

2

Share

How to Replace a Broken Car Key?

The methods for replacing a broken car key are as follows: 1. Straight car key: If a straight key breaks, especially the metal part, it's essential to keep the broken piece as it can be used to make a new key. If the remote part breaks or is damaged, it cannot be repaired, but the remote's model and style can be referenced to create a new remote key. 2. Foldable remote car key: The most vulnerable part of this key is usually the mechanical key interface. If this part breaks, only the shell can be replaced. If the mechanical key breaks, keep the broken piece. Inside the broken key, there's a small chip that can easily fall out, so it's important to preserve it for easier key replacement in the future. 3. Smart car key: Generally, smart keys are less prone to breaking, but care should be taken to prevent the mechanical key and the smart remote part from separating.

17

2

Share

How Long is the Battery Warranty for FAW-Volkswagen Tayron?

What are the reasons why the vehicle steering wheel does not automatically return to center?

Which of the Three Engine Mounts is More Prone to Failure?

What are the effects of turning on the cold air without AC?

What does the elephant on the highway sign mean?

What Does the Yellow Exclamation Mark on the Car Dashboard Mean?

How to Replace a Broken Car Key?

Is the car still under warranty if maintenance is not done at a 4S shop?

How to Remove the Polo Rearview Mirror Housing?

How to Repair Car Paint Scratches?

How to Properly Operate the Steering Wheel?