How Long is the Battery Life of the Renault City K-ZE?

1 Answers
EmilyRose
07/30/25 12:58am
Renault City K-ZE is developed by the Dongfeng Renault Group, with its basic architecture based on Renault's global CMF-A small car platform. Below is a detailed explanation regarding the Renault's battery life: 1. The Renault City K-ZE is equipped with a Tianjin Lishen battery pack with a capacity of 26.8kWh, offering a maximum range of 271 kilometers under NEDC combined conditions. 2. When charging with a standard 7kW charging pile, the Renault can be fully charged in just 4 hours. 3. Additionally, the ternary lithium battery of the City K-ZE has a higher energy density compared to the lithium iron phosphate battery of the Nezha V, resulting in less degradation with repeated use, meaning a longer lifespan.
Was this review help?
2
3
Share
More Forum Discussions

What is the bar under the car door called?

The bar under the car door is called a side skirt. It is used to reduce the airflow entering the underside of the car from both sides of the body. It has a certain spoiler effect and can significantly reduce air resistance under certain conditions. Here is some information about side skirts: 1. Side Skirt: The side skirt refers to the skirt panels installed on both sides of the car body, and its function is equivalent to that of an air dam, used to reduce the airflow entering the underside of the car from both sides. It has a certain spoiler effect and can significantly reduce air resistance under certain conditions. 2. At High Speed: At high speeds, it acts as if the ground is sucking the chassis, greatly increasing operational stability. It should be used in conjunction with front and rear spoiler skirts and is essential for modifications.
6
0
Share

Reasons for No Sound from the Parking Sensor

Reasons why the parking sensor does not beep: 1. Damaged wiring: The wiring connection is inappropriate or already damaged. If the rear of the car is close to an obvious obstacle and the parking sensor does not respond at all, it is a problem with the parking sensor wiring. 2. Slow response: Low sensitivity and slow response. Sometimes, even when the obstacle is visible in the rearview mirror, the parking sensor still cannot recognize it and only beeps when very close. This is due to the poor quality of the radar itself. 3. Failure to detect: There is a blind spot at the far left and far right of the parking sensor. When this blind spot is about to touch an obstacle, the parking sensor cannot detect it. The parking sensor, also known as the "reverse collision avoidance radar" or "parking assist device," mainly consists of ultrasonic sensors, a controller, and a display.
9
3
Share

What are the disadvantages of cruise control?

Disadvantages: In cruise control mode, it cannot respond to sudden situations on the road in a timely manner. Maintaining a constant speed can lead to a relaxed mental state, resulting in reduced concentration, which is not conducive to driving safety. Introduction to cruise control: 1. Overview: The cruise control system (CRUISE-CONTROL-SYSTEM), abbreviated as CCS, is also known as a speed control device, speed control system, or autopilot system. 2. Function: After setting the desired speed, the system automatically maintains the vehicle's speed without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. When this system is used, drivers on highways do not need to control the accelerator pedal for long periods, reducing fatigue and unnecessary speed changes, which can save fuel. 3. Principle: The cruise control system works by comparing the pulse signal from the speed sensor with the set speed and then issuing commands to the servo mechanism to adjust the throttle opening, increasing or decreasing it to maintain the set speed.
9
0
Share

What is the ignition point of engine oil?

Automotive engine oil typically has an ignition point around 200℃. Here is some relevant information about automotive engine oil: 1. Function of engine oil: Automotive engine oil serves to lubricate, clean, cool, seal, reduce friction, prevent rust, and protect against corrosion in the engine. 2. Engine oil determines engine lifespan: The engine is the heart of a vehicle, containing many metal surfaces that move against each other under high-speed, harsh conditions, with operating temperatures reaching 400°C to 600°C. Under such extreme working conditions, only qualified lubricating oil can reduce wear on engine components and extend their service life.
3
5
Share

What are the three components of a Vehicle Identification Number?

Below are the three components of a Vehicle Identification Number (VIN): 1. World Manufacturer Identifier (WMI); 2. Vehicle Descriptor Section (VDS); 3. Vehicle Indicator Section (VIS). The following are the functions of a Vehicle Identification Number: 1. Symbol of identity: The VIN is also known as the "vehicle's ID card". Through the VIN, you can query the vehicle's country of production, manufacturing company or factory, vehicle type, brand name, model series, body style, engine model, model year, safety protection device model, inspection number, assembly plant name, and production sequence number, among others. 2. Facilitates identification: The VIN has many important uses in safety recalls and assisting law enforcement. For example, service providers use the VIN to identify the manufacturer-configured engine, transmission, and braking systems to provide more appropriate services for the vehicle.
11
4
Share

Why are the high beams of a car lower on the left and higher on the right?

In China, vehicles drive on the right side of the road, with oncoming traffic on the left. The left headlight is adjusted to a lower position to ensure the visibility of oncoming drivers, effectively reducing the occurrence of accidents. The right headlight is set higher to illuminate farther distances. On one hand, this helps drivers detect pedestrians ahead earlier, ensuring safer driving. On the other hand, it also alerts non-motorized vehicles or pedestrians to the presence of approaching vehicles from behind, allowing for a safety buffer. Below are some related details: 1. High beams: High beams adjust the intensity of light based on the distance of the filament. The high beam is focused at its focal point, emitting parallel light that is more concentrated and brighter, capable of illuminating distant and high objects. Low beams are positioned beyond the focal point, between 1 to 2 times the focal distance, emitting divergent light that covers a larger area at closer distances. 2. Precautions: When driving at night, it is important to use lights appropriately to avoid compromising the safety of other drivers.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.