How Long Does Vehicle Damage Assessment Take?

1 Answers
Robin
07/29/25 3:19pm
Vehicle insurance damage assessment and review typically takes about 1 day. Below is relevant information: Compulsory Traffic Insurance: A mandatory national auto insurance that provides coverage for the other party's property and personal safety. Non-deductible Special Coverage: The most important feature of this insurance is its absolute deductible waiver. Vehicle Damage Insurance: Primarily protects the vehicle itself. If the car is involved in an accident or suffers damage from natural disasters, these losses can be compensated by the insurance company through vehicle damage insurance. Third-party Liability Insurance: Mainly covers personal injury and property damage to third parties in traffic accidents. To supplement the coverage limit of compulsory traffic insurance, a comprehensive third-party liability insurance is necessary.
Was this review help?
10
5
Share
More Forum Discussions

How to Reset the Tire Pressure Warning?

Tire pressure warning reset methods are as follows: 1. After the tire pressure warning light comes on, first ensure the vehicle is parked safely by the roadside, and check the tire pressure monitoring function on the car's navigation screen for any abnormal wheel readings. 2. Upon confirming an issue with a wheel, inspect the current tire pressure condition. If the warning is due to overinflation, slightly release air to reach the safe tire pressure value. When a tire pressure symbol is displayed, press the confirm button to reset. 3. If the tire pressure is shown as too low, reset the system and drive the vehicle for a while. 4. After completing these steps, the tire pressure warning will be reset.
6
0
Share

What Does a Back-House Vehicle Mean? Is It Legal?

Back-house vehicle refers to a car that cannot be transferred, and buying such a vehicle is illegal. According to the "Resident Identity Card Law of the People's Republic of China," renting, lending, or transferring a resident identity card is illegal. Therefore, profit-driven "back-house" practices are unlawful. Agreements for selling vehicles through such backdoor methods are also not protected by law. Below is an introduction to back-house vehicles: Definition: A back-house vehicle is one that cannot be transferred. It may be a completely normal car with all necessary documents, valid annual inspections, and insurance, but it simply cannot be transferred. Reasons: The license plate's registered location is too far away, making the transfer process too costly; the vehicle might be used as collateral for debt, possibly multiple times; the original owner has passed away, and the vehicle was not deregistered; in areas with purchase restrictions, the license plate and vehicle are transferred together; vehicles from outside the region cannot be registered locally due to migration restrictions; some scammers may sell commercial vehicles converted to non-commercial use as back-house vehicles at low prices. Note: If the current owner flees after a traffic accident, the police will not pursue the current owner's responsibility but will instead attribute it to the original owner. The original owner may be liable for medical expenses, nursing costs, and other compensations; in severe cases, they may also face legal consequences.
15
3
Share

Can a Flooded Car Battery Still Be Used?

In most cases, it can be used after the water has dried. Below is relevant information about car batteries: Introduction: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, the term 'battery' refers to lead-acid batteries, which are mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte. Working Principle: It uses lead plates filled with sponge-like lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When discharging, metallic lead serves as the negative electrode, undergoing oxidation to form lead sulfate, while lead dioxide serves as the positive electrode, undergoing reduction to also form lead sulfate. When charging with direct current, the two electrodes generate lead and lead dioxide, respectively. After the power source is removed, it returns to its pre-discharge state, forming a chemical battery.
14
2
Share

How to Change Car Engine Oil by Yourself?

Steps to change car engine oil: 1. Use a jack to lift the front end of the vehicle or place the vehicle on a bridge frame. 2. Remove the bottom guard plate of the vehicle. 3. Unscrew the oil drain plug on the oil pan. 4. Completely drain the old engine oil. 5. Remove the old oil filter using tools. 6. Apply a layer of engine oil to the rubber ring part of the new oil filter edge. 7. Add new engine oil through the oil filler port.
10
4
Share

Differences Between Imported and Domestically Produced Cars

Imported cars and domestically produced cars differ in the following ways: 1. Domestically produced cars refer to vehicles designed and manufactured by Chinese people, possessing independent intellectual property rights and belonging to Chinese brands; imported cars refer to vehicles purchased by traders from overseas markets without authorization from the brand manufacturers and introduced into the Chinese market for sale. 2. The materials for domestically produced cars are mainly sourced from domestic production; the materials for joint venture cars and imported cars are mostly sourced from foreign production. 3. Domestically produced cars are generally independently researched, developed, and designed by the country; imported cars are entirely researched, developed, and built abroad.
7
5
Share

Will ETC be repeatedly charged if it is brushed by others?

ETC will not be repeatedly charged if it is brushed by others, because each ETC corresponds to the vehicle information, and the license plate information must be consistent for the deduction to be successful. The ETC installation process is as follows: After receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-removal button on the back of the OBU, and the red light will briefly light up. The OLED screen will display "Label Invalid, Please Insert Card," indicating that the device is functioning properly. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press it firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and stops, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.