How Long Does the Video Review for Subject 3 Take?

1 Answers
LeSarah
07/29/25 3:11pm
Subject 3 video review takes 5 to 7 days. Below is a partial introduction to the content of the Subject 3 exam: 1. Pre-drive check: The pre-drive check involves walking around the vehicle for inspection. The exam vehicle is equipped with buttons at all four corners, and during the pre-drive check, all four buttons must be pressed to complete the process. 2. Light test: The light test ensures the driver is familiar with using vehicle lights in various nighttime scenarios. During this test, simply follow the system prompts to perform the corresponding light switching operations. 3. Lane changing: When changing lanes or overtaking the vehicle ahead, turn on the turn signal and remember to shift from 1st to 2nd gear when accelerating. Avoid revving the engine too high. Ensure proper coordination between the clutch and throttle during gear shifts to minimize the risk of gear jamming. 4. Passing schools and intersections: When approaching schools, bus stops, or intersections, reduce speed upon hearing the prompt and maintain it below 30 km/h, applying the brakes appropriately.
Was this review help?
5
2
Share
More Forum Discussions

When was the China III emission standard implemented?

According to the regulations of the National Environmental Protection Agency, starting from July 1, 2008, the China Phase III emission standard was implemented for vehicles with a maximum total mass of 3500kg as approved by the National Development and Reform Commission's vehicle model announcement. Therefore, the China III standard was implemented from July 1, 2008. More information about China III: 1. The China III standard refers to China's third-stage vehicle emission standard. 2. The national third-stage emission standard is equivalent to the European Euro III emission standard, meaning the content of tailpipe pollutants is equivalent to Euro III. The difference is that new vehicles must be equipped with an OBD, i.e., an onboard self-diagnostic system.
13
2
Share

How often should the transmission fluid be changed for the Tiggo 5?

The transmission fluid for the Tiggo 5 should be changed every 2 years or 40,000 kilometers. Transmission fluid is a lubricant that maintains the cleanliness of the gear system, ensuring the proper functioning of the transmission and extending the lifespan of the transmission components. The front fascia of the Tiggo 5 features a chrome trim strip that runs across the large grille, connecting the left and right headlights. The rear light clusters are also connected by a chrome trim strip, echoing the design of the front fascia. The Tiggo 5 has a body length of 4506mm, width of 1841mm, height of 1740mm, and a wheelbase of 2610mm. It is a five-door, five-seat SUV equipped with a 5-speed manual transmission.
1
0
Share

What are the effects of driving with the handbrake engaged?

Driving with the handbrake engaged does have negative effects on the vehicle. The impacts of forgetting to release the handbrake while driving are as follows: 1. The most immediate consequences include accelerated wear of the brake discs, hardening of the brake pads due to overheating, and stretching of the handbrake cable. This leads to reduced braking performance and, in severe cases, may cause smoke to emerge from the rear of the vehicle. 2. If driving with the handbrake engaged for an extended period, it may result in the brake calipers seizing, brake fluid leakage, excessively high brake fluid temperature, and complete loss of braking function. Generally, the faster the vehicle speed while driving with the handbrake engaged, the greater the damage to the braking components, along with some degree of tire wear.
5
2
Share

How to set the automatic locking for the Mistra?

The automatic locking feature is enabled by default on the Mistra and does not require setup. Additional information about automatic locking is as follows: 1. The purpose of the automatic locking function is anti-theft. It quickly locks the doors after driving to prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security. It also protects child passengers inside the car, preventing young children from opening the door handles while the vehicle is in motion. 2. When the vehicle speed reaches the preset value by the computer (usually set by the manufacturer, typically between 10 km/h to 20 km/h), the lock button will automatically engage to prevent accidental door opening. This is the most common type of automatic locking method used in many vehicle models.
7
2
Share

Does Overfilling Coolant Affect Volkswagen Cars?

Overfilling coolant in Volkswagen cars does not have a significant impact, as the cooling system of Volkswagen vehicles is equipped with a pressure regulation device. After the car starts, the excess coolant can overflow through the pressure relief valve due to the principle of thermal expansion and contraction. Location for filling coolant in Volkswagen cars: The function of coolant is to prevent freezing and provide cooling. When filling, since the coolant reservoir in Volkswagen cars has a max (maximum) and min (minimum) water level mark, you only need to fill the coolant to a level between the max and min marks on the reservoir. Precautions for using coolant: Coolant should not be mixed, and low-quality coolant should not be used. Also, avoid directly adding concentrated coolant to prevent issues such as coolant deterioration or thickening at low temperatures. Regular inspection and replacement of coolant are also necessary.
3
0
Share

Can I Go to Any 4S Shop for Volkswagen Maintenance?

Volkswagen maintenance can be performed at any suitable 4S shop, as there is no designated maintenance store. Volkswagen maintenance items: Volkswagen maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Minor maintenance involves replacing engine oil, oil filter, air filter, cabin air filter, etc.; major maintenance items include transmission oil, engine spark plugs, timing belt, etc., along with brake fluid, brake pads, engine coolant, and vehicle tires. Precautions for Volkswagen maintenance: If the user does not perform regular maintenance at the designated 4S shop or manufacturer-authorized service station within the specified mileage after purchasing a new Volkswagen, even during the warranty period, the user will have to bear certain repair costs if issues arise.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.