···
Log in / Register

How Long Does the Tire Pressure Monitoring Last?

4 Answers
VanMax
09/05/25 2:01am

Under normal circumstances, the battery life of built-in tire pressure monitoring sensors can last 5-7 years, while the battery of external tire pressure monitoring sensors typically lasts about 2-3 years. The functions of tire pressure monitoring and the methods to eliminate alarms are as follows: Functions of Tire Pressure Monitoring: The tire pressure monitoring system not only alerts the driver when there is high pressure, low pressure, or high temperature in the tires to ensure driving safety but also helps save fuel and money, making the vehicle more eco-friendly. By continuously monitoring tire conditions through the system, drivers can prevent tire blowouts and contribute to fuel efficiency and environmental protection. Methods to Eliminate Tire Pressure Alarms: Check and confirm whether the tire pressure is normal. If there are issues, adjust it to the standard pressure, then drive a few kilometers. Usually, the system will automatically reset. If the tire pressure is confirmed to be normal, visit an auto service shop to inspect the tire pressure sensors and clear any fault codes. Alternatively, manually reset the system by locating the settings button on the central console.

Was this review help?
4
5
Share
IsabelleLynn
09/17/25 2:45am

The mid-size SUV I drive has a built-in tire pressure monitoring sensor with a battery life of about 5 to 10 years. My car only showed a low battery warning after 8 years of use, which largely depends on the vehicle's usage. It's important to avoid exposing the sensor to strong impacts or high-temperature environments, such as parking under the scorching sun for too long, as this can quickly drain the battery. I recommend checking the tire pressure stability every six months or so and having a mechanic test the system to ensure it's functioning properly, preventing potential failures in advance. Once the tire pressure monitoring fails, driving safety risks increase, especially on highways where the rate of tire blowouts is higher. Timely maintenance and replacement can prevent such hazards. Additionally, newer vehicles generally come equipped with long-life sensors, making upgrades and maintenance much more convenient.

Was this review help?
17
2
Share
Expand All
OMaggie
10/31/25 3:16am

As an automotive enthusiast, I've learned that tire pressure monitoring systems are mainly divided into two types: direct sensor and indirect. Direct sensors are mounted on the wheel rims with built-in batteries that typically last 5 to 10 years, depending on mileage and road conditions. From my experience, avoiding aggressive driving and frequent water exposure helps extend their lifespan. The indirect type utilizes the ABS system, requiring almost no additional consumables and lasting the vehicle's lifetime until scrapping. Regularly using diagnostic tools to check sensor signal strength prevents false alarms caused by voltage instability. When the battery runs out, replacing a sensor only costs a few hundred dollars, which isn't a major expense, but early problem identification saves hassle. Modern vehicles have made this feature more common, simplifying maintenance, but maintaining accurate tire pressure is what truly ensures safety.

Was this review help?
7
5
Share
Expand All
DeEmersyn
12/14/25 3:24am

I believe the average lifespan of TPMS sensor batteries is around 6 years. For family cars used in urban commuting, they typically prompt for replacement after about 5 years. Don't overlook daily tire maintenance - check tire pressure frequently to avoid overworking the sensors. The key benefit is that it alerts you to low tire pressure, reducing blowout risks and protecting family safety. Choosing reliable OEM parts from reputable brands ensures longer service life. Replacement at authorized shops costs just a few hundred yuan - never opt for cheap knockoffs that fail easily. Regular professional system checks can extend usage by two more years, making the overall cost quite reasonable.

Was this review help?
6
0
Share
Expand All
More Forum Discussions

Where is the Mondeo's Cabin Air Filter Located?

The Mondeo's cabin air filter is located inside the glove compartment on the passenger side. Open the passenger door, access the glove box, and pry open the decorative panel beside it to reveal the filter. The Mondeo is a mid-size sedan under Ford. Taking the 2020 Mondeo 180 Fashion model as an example, its body dimensions are: length 4873mm, width 1852mm, height 1470mm, with a wheelbase of 2850mm and a fuel tank capacity of 62.5 liters. The 2020 Mondeo 180 Fashion is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum power of 134kW at 6000rpm, paired with a 6-speed automatic transmission.
7
2
Share

What is the maintenance interval for the Geely Emgrand GS?

The maintenance interval for the Geely Emgrand GS is every 5,000 kilometers or 3 months. The gasoline filter should be replaced every 30,000 kilometers, the spark plugs every 20,000 kilometers, and the brake fluid and coolant every 40,000 kilometers. Taking the 2020 Geely Emgrand GS as an example, its body dimensions are: length 4,440mm, width 1,833mm, height 1,573mm, with a wheelbase of 2,700mm and a fuel tank capacity of 55 liters. The 2020 Geely Emgrand GS is equipped with a 1.4L turbocharged engine, delivering a maximum power of 104kW and a maximum torque of 235Nm, paired with a 6-speed manual transmission. It features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
3
3
Share

Should You Shift to P Gear or Turn Off the Engine First When Parking an Automatic Car?

When parking an automatic car, you should turn off the engine first. The parking steps are: 1. Slow down and press the brake, shift to N gear, then turn off the engine; 2. Pull the handbrake, release the foot brake, and after the car comes to a complete stop, shift to P gear. The starting steps for an automatic car are: 1. Insert the key, shift to P gear, press the brake, shift to N gear, and start the engine; 2. Shift from N gear to D gear, release the handbrake and foot brake to start moving. The gears of an automatic car are: 1. P is the Parking gear: Used for starting and long-term parking; 2. R is the Reverse gear: Used for reversing; 3. N is the Neutral gear: Used for short-term parking; 4. D is the Drive gear: Also known as the driving gear, used for smooth forward movement; 5. L is the Low gear: Used for going downhill or uphill; 6. S is the Sport mode: Used for overtaking to get stronger power; 7. M is the Manual mode: Can be adjusted for manual driving.
12
3
Share

How to Turn Off the Start-Stop Function in Audi Q5?

The methods to turn off the start-stop function in Audi Q5 are: 1. Locate the automatic start-stop switch near the center console and turn it off; 2. Use a specialized diagnostic tool to disable it. Taking the 2018 Audi Q5 as an example, its body dimensions are: length 4629mm, width 1898mm, height 1655mm, wheelbase 2807mm, and fuel tank capacity 75l. The 2018 Audi Q5 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 169kW and a maximum torque of 350Nm, paired with an 8-speed automatic manual transmission. Both front and rear suspensions feature a five-link independent suspension system.
4
2
Share

Why Can't the Car Window Roll Up?

The reasons why the car window cannot roll up are: 1. Excessive dirt or foreign objects in the window guide channel; 2. Aging of the window rubber seal or dust accumulation; 3. Malfunction of the window regulator components. The solutions for a car window that won't roll up are: 1. Use a wet cloth fixed to a chopstick to clean the guide channel by sliding it back and forth; 2. Apply lubricant to the rubber seal to maintain its flexibility and reduce cracking; 3. Replace the window regulator assembly. The functions of car windows are: to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Depending on their installation positions, car windows can be categorized into front windshields, rear windshields, side windows, and door windows.
17
0
Share

What is the fuel tank capacity of the Skoda Octavia in liters?

The fuel tank capacity for all models of the Skoda Octavia is 51 liters when full. The vehicle's engine features natural aspiration intake, with a MacPherson strut front suspension and front-wheel drive configuration. In the same vehicle class, the Xingrui 2021 2.0TD Elite model has a fuel tank capacity of 50 liters, while the Sagitar 2022 200TSI Manual Flyover Edition also has a 50-liter fuel tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, with additional space remaining from the safety limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F'. When the needle approaches 'E', it indicates that the fuel is nearly depleted, while nearing 'F' signifies sufficient fuel.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.