···
Log in / Register

How Long Does the Subject Three Review Generally Take?

4 Answers
MacWalter
07/25/25 4:45am
Generally 3-7 days. Precautions for Subject Three Exam: 1. Pre-drive inspection: This involves walking around the vehicle to inspect it. The exam vehicle will have buttons installed at all four corners. During the walk-around inspection, you must press all four buttons to complete the process. 2. Lighting test: To familiarize drivers with the use of vehicle lights in various nighttime situations, you only need to follow the system prompts to perform corresponding light switching operations. 3. Straight-line driving: This is a routine operation. During this time, you should hold the steering wheel steady to prevent the vehicle from deviating. 4. Lane changing and overtaking: When changing lanes or overtaking the vehicle ahead, you must use the turn signal. During gear shifting, coordinate the clutch and throttle properly to avoid gear jamming. 5. Approaching schools, bus stops, and intersections: Upon hearing such verbal prompts, try to reduce the vehicle speed as much as possible.
Was this review help?
14
0
Share
DelCamilla
08/11/25 12:28pm
I just finished the subject three test, and the review time is quite short—usually you can get the results within one to three working days. I personally checked mine on the Traffic Management 12123 App the next day. If the system runs smoothly or the test center is efficient, the results might even come out on the same day. While waiting for the results, I suggest not stressing too much. Instead, take the opportunity to review the subject four exam content, like practicing more mock tests or reading traffic rule books, so you can schedule the next test immediately after passing. In case of holidays or peak exam periods, the review might extend to about a week, but this is rare—most of the time, it goes smoothly. If you pass, keep pushing forward with subject four; if not, don’t be discouraged—just practice more road test skills and prepare for a retake. Overall, the process is quite user-friendly, so waiting patiently is the way to go.
Was this review help?
16
4
Share
Expand All
VanTheo
09/27/25 4:10am
The review for Subject 3 usually takes just two or three days to complete, which is quite common based on my experience accompanying family members for their tests. There aren't many influencing factors, but occasionally bad weather or system upgrades may extend the processing time slightly, though it generally concludes within a week. I recommend not just waiting idly after the test—you can check the progress at the driving school or review your exam documents to ensure everything is correct. The results will be displayed directly in the app after review, allowing you to immediately schedule Subject 4, as the process transitions quite smoothly. If there's a delay, don't worry—contacting the test center can expedite the process. After the test, it's a good idea to summarize any mistakes made during the road test, such as gear shifting or reversing, to prepare for a retake or Subject 4, avoiding wasted time.
Was this review help?
9
2
Share
Expand All
LeAndrew
11/10/25 6:10am
When I took the Subject 3 exam, the review process only took a day or two. Just log in to the Traffic Management 12123 APP to check your results—it's very quick, so don't wait too long. If the test center isn't busy, the results might be updated the same day; during peak periods like summer or winter breaks, it could take up to a week at most. Once approved, start preparing for Subject 4 immediately—don't waste time. Also, pay attention to notifications from the test center to avoid missing any details. While waiting, you can do other things like watching traffic videos to learn tips. Overall, it's simple, efficient, and hassle-free.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

Is it possible to drive a sedan on the 318 Sichuan-Tibet Highway?

318 Sichuan-Tibet Highway can be driven by sedan. Here are some considerations for self-driving on the Sichuan-Tibet Highway: Chassis issues: Although the road conditions of the Sichuan-Tibet Highway have improved year by year, there are still many problems when driving during the rainy season. In high-altitude areas, cars with low displacement already have insufficient power. If encountering landslides or water-damaged roads, the low chassis of a sedan makes it difficult to pass. Some places may even cause the chassis to scrape. Tire issues: Although the road conditions of the Sichuan-Tibet Highway are getting better, with most sections being asphalt roads, there are still some sections that are gravel roads due to natural conditions and are constantly under repair. It is inevitable to encounter sharp stones scattered everywhere, cutting into the tires like knives. The tires of sedans, which are thinner and designed for asphalt roads, cannot withstand the significant damage caused by gravel roads. Additionally, the altitude changes along the Sichuan-Tibet Highway, ranging from over 4,000 meters to just over 2,000 meters, greatly affect the tire pressure of sedans typically used for urban roads.
14
5
Share

What are the main characteristics of off-road vehicles?

The main characteristics of off-road vehicles are four-wheel drive, higher chassis, tires with better grip, higher exhaust pipes, larger horsepower, and thick, sturdy bumpers. An off-road vehicle is a type of automobile specially designed for off-road use, primarily referring to vehicles that can be used on rough terrain. Off-road vehicles can not only adapt to various road conditions in the wild but also give people a sense of ruggedness and boldness. Many people also enjoy driving off-road vehicles in urban areas. Off-road vehicles are members of the military vehicle family, most of which have certain off-road driving capabilities. These vehicles can travel on very poor-quality roads or battlefields. To meet the needs of combat, a more capable military off-road vehicle has emerged.
5
3
Share

What are the benefits of 360-degree soft-wrapped floor mats?

360-degree soft-wrapped car floor mats are custom-made for each vehicle model with embedded installation, providing 360-degree coverage without dead corners. The mats are secured under the sliding rails to prevent slipping, completely covering all carpeted areas, reducing noise, and functioning like floor coverings—ensuring safety without interfering with the accelerator or brake pedals. More details are as follows: Definition: The 360-degree soft wrap is a vehicle-specific, split-edge embedded full-coverage car floor mat. It is precisely tailored according to the original vehicle data with a 1:1 streamlined design, exclusively made for specific car models—different models correspond to different styles of 360-degree soft wraps. Instead of a single-piece design, it consists of separate mats for the driver's seat, front passenger seat, and a shared rear-seat mat. Function: The unique edge-embedded design of the 360-degree aviation soft wrap ensures that all edges are tucked into the adjacent interior trim gaps, seamlessly integrating with the vehicle to completely block dust. The split-edge embedded design of the 360-degree soft wrap means each mat section is embedded into the vehicle's trim, preventing edges from lifting. This results in a clean, sleek, and secure fit, enhancing protection. Even with frequent movement, the mats stay in place, maintain their shape, and do not interfere with the vehicle's functions or operations, maximizing driving safety.
15
5
Share

What is the purpose of a crankshaft?

The crankshaft is a crucial component in an engine. It bears the force transmitted from the connecting rod and converts it into torque, which is then output through the crankshaft to drive other accessories on the engine. The crankshaft is subjected to the combined effects of centrifugal force from rotating masses, periodically varying gas inertial forces, and reciprocating inertial forces, resulting in bending and torsional loads on the crankshaft. To reduce the mass of the crankshaft and the centrifugal force generated during operation, the crankshaft journals are often made hollow. Oil holes are drilled on the surface of each journal to allow the introduction or extraction of oil for lubricating the journal surfaces. To minimize stress concentration, transition fillets are used at the connections between the main journals, crankpins, and crank webs.
1
5
Share

How to Match the Throttle of Audi A4L?

Audi A4L throttle matching method: It is necessary to use the throttle matching function under the guidance of a special computer for matching, which is difficult for individuals to operate. It is recommended to go to a 4S shop for processing. The throttle is a controllable valve that controls the air entering the engine. After the gas enters the intake pipe, it will mix with gasoline to form a combustible mixture, which then burns to form work. The Audi A4L is a car from Audi. In terms of body size, its length, width, and height are 4761 mm, 1826 mm, and 1439 mm respectively, with a wheelbase of 2869 mm. The Audi A4L has a fashionable and dynamic appearance, smooth lines, exquisite interior workmanship, rich configuration, good sound effects, spacious and practical space, good comfort, and a classic brand.
19
5
Share

What does loop recording mean for a dash cam?

Loop recording for a dash cam refers to the continuous video recording function of the device. Modern dash cams are equipped with memory cards, typically ranging from 4GB to 32GB in capacity. As the dash cam records in loop mode, the saved videos accumulate, gradually occupying the memory card's space. When the memory card reaches full capacity, the loop recording feature automatically deletes the oldest recorded videos (those furthest from the current time) to free up space. This ensures the continuous operation of the loop recording function, allowing the dash cam to store the most recent video footage.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.