How Long Does the Buick Envision Battery Last?

3 Answers
Fitzgerald
07/29/25 5:32pm
Buick Envision batteries typically last around three years, after which they generally need replacement. When replacing the battery, owners can opt for an AGM battery, which lasts longer than standard lead-acid batteries and offers superior charge/discharge performance. Steps to replace the Buick Envision battery: 1. Remove the battery's securing mechanism; some batteries may have a protective casing that needs to be detached first. 2. Disconnect the battery's negative terminal first—avoid disconnecting the positive terminal initially, as contact between the positive terminal and the car body can cause a short circuit and dangerous sparks. 3. Disconnect the positive terminal, which usually has a protective fuse; take care not to damage it during removal. 4. Secure the new battery, then connect the positive terminal followed by the negative terminal, reversing the removal order.
Was this review help?
11
1
Share
StWalker
08/14/25 8:38am
I've been driving the Buick Envision for several years, and my car battery usually starts to struggle after about 3 years. Here in the cold northern winters, when temperatures drop below -10°C, the car often fails to start, which is when I know it's time to replace the battery. The average lifespan is around 2 to 5 years, but it really depends on driving habits. For someone like me who makes frequent short trips in the city with high start-stop frequency, the battery wears out faster. Another easily overlooked aspect is the battery terminals—if those oxide buildups aren't cleaned regularly, it can lead to uneven discharge. I recommend checking the voltage every six months or listening to the sound when starting the car; if the engine cranks slower than usual, it's a warning sign. Also, the Envision has spacious under-hood space, making battery inspection easier. Don’t slack on routine maintenance—like turning off headlights and AC before shutting down the engine—it can extend battery life by a few months. Overall, don’t wait until the car breaks down; safety comes first.
Was this review help?
4
1
Share
Expand All
SanFrank
10/13/25 7:30am
As a new owner of the Envision, I was initially puzzled about the lifespan of the car battery. I consulted several experienced drivers, and they mentioned that a new car battery typically lasts around 3 years, provided you don't frequently forget to turn off electrical devices. For instance, I used to enjoy sitting in the car with the music on for extended periods, which led to frequent battery drain in less than two years. Later, I learned my lesson and developed better habits: avoid pressing too many buttons before starting the engine and schedule regular simple checks at the service center. Weather is also a factor—high summer temperatures can cause the battery fluid to evaporate faster, potentially shortening its lifespan. Buick models generally have more durable batteries compared to average cars, thanks to their more efficient engine design, but it's still crucial to monitor the charging system. If the alternator is unstable, even the strongest battery won't last. In summary, with proper daily maintenance, I believe the battery should last two to three years without issues, and it's essential to replace it promptly if any problems arise.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

How to adjust the clock mode on the XRV dashboard?

Steps for models with a color audio display system: 1. Press the MENU/CLOCK button. 2. Press the (LIST/PUSH/SELECT) button to enter the clock adjustment interface. 3. Rotate the (LIST/PUSH/SELECT) knob left or right to adjust the hour and minute. 4. Finally, select confirm to set the time. Steps for models with a smart screen connectivity system: 1. Select the HOME icon, then choose settings. 2. Select System - Clock - Clock Adjustment. 3. Choose to adjust the hour and minute. 4. Finally, select confirm to set the time.
16
5
Share

Is it harmful if the car chassis is soaked in water?

If a vehicle is submerged in water, it can damage the engine and electrical systems. Generally, if the water level is below the air intake, there is no harm, but if it rises above, damage may occur. Below is an introduction to car wading-related content: 1. Effects: Driving through water may cause the car engine to stall and may also damage the electronic systems in the car. 2. Damage: If the electronic systems are damaged, it will affect the normal operation of the car. Driving through water can also cause rust on the car chassis. If water is sucked into the engine while driving through water, the engine will stall. If the electronic systems are damaged, they need to be replaced immediately; otherwise, it will affect the normal operation of the car.
15
3
Share

Does the Wuling Hongguang Mini have one or two reverse lights?

Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
14
5
Share

Does replacing the oil temperature sensor require removing the transmission?

Replacing the oil temperature sensor does require removing the transmission. The transmission oil temperature sensor is installed on the valve plate inside the transmission oil pan. Its main function is to detect the temperature of the automatic transmission hydraulic oil. When removing the transmission, be careful not to pull hard on the wiring harness on the valve plate. The testing method for the oil temperature sensor is as follows: 1. Measure the resistance value of the oil temperature sensor: Remove the transmission oil temperature sensor, place the sensor in a beaker filled with water, heat the water in the beaker, and measure the resistance between the two terminals of the sensor at different temperatures. 2. Standard resistance value for the sensor: Compare the measured resistance value with the specified value. If the resistance value differs significantly from the specified value, it should be replaced.
8
4
Share

How often should the CVT transmission fluid be changed in the Nissan Qashqai?

Nissan Qashqai CVT transmission fluid generally needs to be replaced every 80,000 to 100,000 kilometers or every 5 to 6 years. Symptoms of deteriorated transmission fluid in the Nissan Qashqai: 1. Slipping: The engine speed increases, and slipping occurs under high-torque conditions such as uphill driving. 2. Oil leakage: Poor sealing of the transmission, possibly due to issues with gaskets or seals. 3. Jerking: The main cause may be deteriorated transmission fluid containing dirt or impurities. 4. Abnormal noises: Excessive debris or impurities in the transmission fluid. 5. Overheating: The dashboard will display a transmission fault warning light. 6. Stalling: The engine stalls when shifting from P to D gear. Possible failures include the solenoid valve, lock-up control valve, or input shaft speed sensor.
4
3
Share

Where to Get a Car Natural Gas Tank Inspection?

Local Special Equipment Inspection and Research Institute (Special Inspection Institute) gas tank inspection stations conduct cylinder inspections. Here are the relevant details: 1. Material Proof: For inspection, you need to bring the gas tank usage registration certificate from the oil-to-gas conversion, the gas tank factory qualification certificate, the gas tank installation supervision inspection certificate, the vehicle's driving license, and the owner's ID card to the Special Inspection Institute for inspection. For details, you can inquire by calling the local Special Inspection Institute. 2. Pressure Equipment: A gas tank is a type of pressure equipment with explosion hazards, and its contained medium is generally flammable, explosive, toxic, highly corrosive, etc. Its usage environment, due to characteristics like mobility, repeated refilling, non-fixed operators, and changing usage conditions, makes it more complex and harsh compared to other pressure vessels.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.