How Long Does the Battery of Elysion Hybrid Last?

2 Answers
DelaneyFitz
08/27/25 3:36am
Elysion Hybrid battery life is between 3 to 5 years. The battery maintenance methods include: 1. Do not store the battery in a depleted state; 2. Avoid high current discharge; 3. Master the charging time; 4. Prevent exposure to direct sunlight; 5. Avoid overheating of the plug during charging. The Elysion is an MPV with body dimensions of: length 4950mm, width 1842mm, height 1711mm, wheelbase 2900mm, and a fuel tank capacity of 50 liters. The Elysion is equipped with a 2.0L naturally aspirated engine, with a maximum power of 107kW, maximum power speed of 6200rpm, and maximum torque of 175Nm, paired with an electronic continuously variable transmission.
Was this review help?
8
3
Share
DeCole
09/09/25 2:44am
The battery lifespan of the Elysion hybrid is generally between 8 to 10 years, which is quite common for hybrid vehicles. Having used several similar models, I've noticed they typically employ lithium-ion batteries designed for roughly this duration. Multiple factors influence this—hot weather can accelerate aging, and driving habits are crucial. Frequent hard acceleration or long-distance driving tends to speed up battery degradation. I've observed that avoiding extreme low charge levels or charging to 100% can effectively enhance durability. The warranty usually covers 8 years or 100,000 kilometers, so under normal usage, there's little to worry about. However, gradual capacity reduction over time is normal and might lead to higher fuel consumption, signaling it's time for a professional inspection. Consistent routine maintenance, like having the 4S store monitor battery health, can extend its life by a few more years.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What is the Volkswagen model that starts with 'ph'?

The Volkswagen model that starts with 'ph' is the Phideon. Taking the 2021 Volkswagen Phideon as an example, it belongs to the full-size sedan category. Its body dimensions are: length 5074mm, width 1893mm, height 1489mm, with a wheelbase of 3009mm, a fuel tank capacity of 75 liters, and a trunk capacity of 440 liters. The 2021 Volkswagen Phideon is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 224PS, maximum power of 165kW, and maximum torque of 350Nm, with the maximum torque available from 1650rpm to 4500rpm. It is paired with a 7-speed wet dual-clutch automatic transmission.
9
3
Share

How to Set the Lock Beep for the Lynk & Co 03?

The method to set the lock beep for the Lynk & Co 03 is: 1. Find the settings on the central control screen; 2. Click on settings, where the basic vehicle settings will appear, then scroll down to find the lock feedback option to set the lock beep function. Taking the 2021 Lynk & Co 03 Manual Pure Lite version as an example, it belongs to the compact car category with body dimensions of: length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm. The 2021 Lynk & Co 03 Manual Pure Lite version is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW at 5000rpm, and a maximum torque of 245Nm within the range of 1450 to 4000rpm, paired with a 6-speed manual transmission.
4
4
Share

Which turn signal to use when reversing?

No turn signal is required when reversing. The turn signal operates as follows: up for right and down for left. Its usage method is: 1. Push the turn signal lever upward to activate the right turn signal; 2. Pull the turn signal lever downward to activate the left turn signal. The functions of turn signals are: 1. To indicate the turning direction to pedestrians or other vehicles; 2. To show the direction for overtaking or lane changing; 3. When both left and right turn signals flash simultaneously, it indicates an emergency situation to alert other vehicles. Precautions for using turn signals include: 1. Activate the turn signal in advance when making a turn; 2. Use the left turn signal when overtaking and the right turn signal when returning to the original lane; 3. When activating the turn signal, observe pedestrians and oncoming vehicles before performing the maneuver.
12
5
Share

What letters are used in Yan'an license plates?

Yan'an license plates use the prefix Shaan J. The license plate prefixes for various cities in Shaanxi Province are as follows: Shaan A for Xi'an, Shaan B for Tongchuan, Shaan C for Baoji, Shaan D for Xianyang, Shaan E for Weinan, Shaan F for Hanzhong, Shaan G for Ankang, Shaan H for Shangluo, Shaan J for Yan'an, Shaan K for Yulin, and Shaan V for Yangling Agricultural Demonstration Zone. A license plate number consists of Chinese characters, English letters, and a five-digit serial number. Its functions include: 1. Numbering and information registration for vehicles; 2. Identifying the region to which a vehicle belongs; 3. Tracing the owner and registration details of a vehicle based on the license plate. Types of license plates: 1. White represents military and police plates; 2. Blue represents ordinary small vehicles with fewer than 7 seats; 3. Yellow represents ordinary large vehicles; 4. Black represents foreign enterprise plates.
16
5
Share

How to Close the Volkswagen Sunroof?

To close the Volkswagen sunroof, follow these steps: 1. Sit in the car and power it on; 2. Locate the sunroof control button; 3. Rotate the sunroof control button to change its position. Functions of the sunroof: 1. Changes the traditional ventilation method; 2. Prevents exhaust fumes from entering the car; 3. Reduces wind noise; 4. Quickly lowers the interior temperature; 5. Rapidly removes fog from the interior; 6. Expands the field of vision. Volkswagen models include: Magotan, Sagitar, Golf, Tiguan L, Tayron, and Phideon. Taking the 2021 Golf as an example, it is a compact car with the following dimensions: length 4296mm, width 1788mm, height 1471mm, wheelbase 2636mm, fuel tank capacity 51L, and trunk capacity 380L. The 2021 Golf is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 200Nm, and is paired with a 7-speed dual-clutch transmission.
15
5
Share

How to Turn Off the High Beam on a Mercedes-Benz?

To turn off the high beam on a Mercedes-Benz, start the vehicle and locate the light adjustment button on the lower left side of the steering wheel. Adjust the light button to 'auto' to deactivate the high beam. Below are the specific methods for operating the lights on a Mercedes-Benz: 1. Turn signals and parking lights. With the ignition switch on, rotate the control lever to the corresponding position for turn signals or parking lights to activate the respective lights. 2. High beam. Push the light control lever forward to turn on the high beam. 3. Fog lights. The switch is located on the left side of the dashboard. Rotate the switch to the appropriate position to activate the fog lights. 4. Automatic headlights, low beam, and position lights. When the AUTO indicator light is illuminated, it means the automatic headlights are active. Rotate the knob to switch between automatic headlights, low beam, and position lights. 5. Headlight washer (available on certain models). With the headlights on, activate the windshield washer switch to clean the headlights. If you only want to clean the windshield, turn off the headlights before activating the windshield washer switch.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.