How Long Does It Usually Take to Practice Subject 2?

1 Answers
FernandoLee
07/30/25 5:23am
Generally, the daily practice time for each individual is not fixed, and the number of practice days also varies. Normally, practicing Subject 2 takes about two weeks. Relevant information about Subject 2: 1. Exam Content: After entering the examination site, the safety officer arranges for the examinee to get into the car. After swiping the ID card, the exam begins. There are 5 test items: stopping and starting on a slope, right-angle turn, S-curve, parallel parking, and reversing into a garage. The exam duration is approximately 10 minutes. 2. Exam Essentials: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently grasp the basic methods of driving on the site and internal roads, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
Was this review help?
1
1
Share
More Forum Discussions

Can the 10th-generation Accord use 95-octane gasoline?

The 10th-generation Accord can use 95-octane gasoline, but the minimum fuel grade for the 10th-generation Accord is 92-octane gasoline, and it is not recommended to use 95-octane gasoline for a long time. There is no difference in quality between 92-octane and 95-octane gasoline. The main difference lies in the octane rating, which directly affects the anti-knock performance of the two types of gasoline. The fuel grade specified by the manufacturer is suitable for the engine. A higher octane rating does not necessarily provide the engine with more power. The gasoline octane rating used by the engine should be determined based on its own structure. The 10th-generation Accord is a car launched by GAC Honda and embodies Honda's innovative spirit and global leading technology. The 10th-generation Accord features dazzling crystal LED headlights with a unique square high-end perspective that reflects dynamic tension, expanding the lighting range by 50% compared to previous models.
1
0
Share

Should You Press the Brake to Start/Stop with One-Button Ignition?

One-button ignition requires pressing the brake to stop. Here is relevant information: 1. One-button ignition does not require pressing the brake to stop, but when starting the engine, you need to press the brake pedal. If the brake pedal is not pressed during startup, the engine cannot start. Cars equipped with a one-button ignition system allow the owner to simply carry the car key into the vehicle. Once inside, there is no need to insert or turn the key—just press the brake pedal and push the start button to ignite the engine. 2. The one-button ignition system was originally a device used in racing cars. It enabled racers to start the engine quickly and immediately engage in the race. Later, this system was adopted for use in civilian vehicles as well.
7
2
Share

Is it okay to replace just one car tire?

It is possible to replace just one car tire, but the new tire must have a tread groove depth similar to the other tire on the same axle. Otherwise, it may cause issues such as vehicle deviation. Tires on the same axle should be of the same specification, structure, manufacturer, and tread pattern, including load index and speed rating. It is recommended to replace at least two tires on the same axle. The details are as follows: 1. If the car is new and has not been driven much, only the problematic tire needs to be replaced, as the wear on the tires of the same axle will be similar; 2. If the tires have been driven for tens of thousands of kilometers but do not yet need replacement, and only one tire has an issue, replacing just one tire may result in uneven height, causing the vehicle to jolt or deviate at higher speeds. Therefore, in this case, it is best to replace a pair of tires; 3. If the repair shop does not have the same brand or model of tire as the car, for short-term driving, replace one pair, but for long-term driving, replace two pairs.
2
0
Share

How to Remove the Center Console of the Lingpai?

Here are the detailed steps for removing the center console of the Lingpai: 1. Remove the CD player panel, which refers to the panel larger than the two air vents. 2. There are clips at the four corners of the panel. You should move the air vent cover upwards, insert your fingers to hook the inner side of the panel, and pull it out. The same method can be used for other parts of the panel. 3. After the CD player is exposed, there are two screws at the top and one at the bottom of the CD player. Remove them and disconnect the wiring harness connected to the CD player. Below is additional information on reusing the removed center console: 1. Equip it with a power supply, connect it to speakers, and use it as an amplifier for the radio, CD player, or external audio sources. 2. Purchase an external case and convert it into a portable radio recorder. 3. Use it as a CD player and radio, powered by a 12V DC power supply.
8
0
Share

Does ETC have a front and back side?

ETC does have a front and back side. ETC is an electronic toll collection system, also known as an automatic road payment system. It is a road toll method specifically designed for toll roads, commonly seen on highways, bridges or tunnels with toll policies, and some sections of urban centers to alleviate traffic congestion. The installation method for the ETC device is as follows: 1. Purchase the ETC device and check if all components are complete, then review the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the adhesive backing of the device, fold the solar panel against the vehicle's front windshield, and press firmly to ensure secure adhesion; 4. Install the device in the center upper part of the vehicle's front windshield without obstructing the normal driving view. It should be adhered in one go and not removed and re-adhered; 5. Insert the ETC card to activate the device. Upon hearing a beep and seeing the device indicator light up, the device is activated, and the installation is complete.
16
4
Share

Which gear should be used when climbing a slope?

Information about gear selection when driving uphill is as follows: 1. When driving uphill, the appropriate gear depends on the climbing power of your vehicle. Each car has different climbing capabilities. For small slopes, use 4th gear if it provides sufficient power. 2. For moderate slopes, use 3rd gear if it's powerful enough. If 3rd gear isn't sufficient, shift to 2nd gear (you can shift either at the base or on the slope, but you need to master the coordination between clutch and throttle). 3. For steep slopes, try to use 2nd gear if it's powerful enough. If 2nd gear isn't sufficient, shift to 1st gear (shifting can be done either at the base or on the slope, but the key is to accurately judge the slope gradient in advance and coordinate clutch and throttle properly). This approach ensures economical fuel consumption and safe driving techniques.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.