How long does it usually take to get a C1 driver's license?

1 Answers
LaJeffrey
07/30/25 9:55am
If you want to obtain a C1 driver's license, it generally takes about 3 months. If your driving skills are not proficient, you may need around 40 days, which shows a significant difference. Introduction: The C1 driver's license is one of the codes for motor vehicle driving licenses. The permitted vehicle types for a C1 license include all models under C2, C3, and C4, covering small and micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special-purpose vehicles. Examination Subjects: The test consists of four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense, commonly referred to as Subject 1, Subject 2, Subject 3, and Subject 4.
Was this review help?
13
5
Share
More Forum Discussions

How Many Chances Are There for Subject 2 Test?

For the Subject 2 test, if you fail the first attempt, you can retake it once. If you do not participate in the retake or fail the retake, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of rescheduled attempts for Subject 2 and Subject 3 road driving skill tests must not exceed five times. If the fifth rescheduled test is still failed, the passing scores of other subjects already taken will be invalidated. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for large vehicles (A1, A2, A3, B1, B2) include: pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, narrow gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. The test items for small vehicles (C1, C2) include: reversing into a garage, parallel parking, slope parking and starting (canceled for C2), right-angle turning, and curve driving (commonly known as S-curve), which are the five mandatory items (some regions also include a sixth item: highway toll card collection).
15
0
Share

Where is the fuse box of Roewe 550 located?

Roewe 550 fuse box is located inside the glove compartment, which can be seen by lifting a cover plate. The decorative panel under the glove compartment is secured with 2 screws and 2 plastic clips. Remove the screws and clips, then take off the panel to access the fuse box. The installation position and size of each fuse are indicated on the label printed on the back of the fuse box. The Roewe 550 is equipped with a TST 6-speed oil-cooled dual-clutch automatic transmission system, Inkanet 3G digital intelligent network driving system, StartStop digital intelligent start-stop energy-saving system, EPB digital intelligent electronic parking system, and Configurable color-customizable digital instrument system.
4
0
Share

What to Do When the Brake Cable Doesn't Retract?

Brake cable not retracting is usually caused by issues like brake rusting. Rust removal is required. Below are the specific reasons for brake cable not retracting: 1. Brake rusted or severely worn: Remove the brake cable, drip a few drops of lubricating oil from the top of the cable housing, repeatedly pull and release the cable to lubricate the housing and increase its lubrication. If the effect is still poor after adding lubricating oil, the cable needs to be replaced. 2. Weak spring on the caliper: The return spring on the caliper, if not cleaned for a long time, may accumulate a large amount of dust and dirt, potentially affecting the cable's retraction. Cleaning the spring is necessary to ensure the brake cable's lubrication.
16
0
Share

Where Can I Learn Car Color Change Wrapping?

Car color change wrapping can be learned at professional automotive repair schools or training courses. There are two methods for vehicle color change wrapping: 1. Dry Application: Suitable for motorcycles, small cars, or small-area wrapping. 2. Wet Application: This method is used for car wrapping or large-area applications. Relevant legal knowledge about car color changes is as follows: 1. Illegal vehicle modification: This refers to modifications to a vehicle's appearance, power system, transmission system, or braking system that exceed the original design load capacity and functions, and are not permitted by national laws or manufacturer approval. 2. Illegal modification of motor vehicles: If a registered motor vehicle needs to change its usage nature, body color, body, or frame, the vehicle owner must apply for modification registration at the local vehicle management office.
9
2
Share

How long does it take to lose points for gear and speed mismatch in Subject 3?

In Subject 3, a gear and speed mismatch lasting 2-3 seconds will result in point deduction. 1. Test requirements: When shifting gears, you must pause in neutral. During the test, only when passing through neutral will the sensor receive your gear-shifting signal and recognize your gear-shifting action. Gear shifting must be fast. The key point of gear shifting is speed – complete the actions of depressing the clutch, shifting gears, and stepping on the accelerator as quickly as possible. 2. Sequential gear shifting: Skipping gears is strictly prohibited during the road test. Gear changes must be sequential, such as from first gear to second gear, or second gear to third gear. Otherwise, the test recorder will note it and deduct corresponding points. If you accidentally shift to the wrong gear, you can immediately depress the clutch, return the gear to its original position, and then shift again.
5
1
Share

How to Open the Bonnet of a Southeast DX3?

In the lower left corner of the driver's seat, pull up along the arrow to release the handle, lift the bonnet, then remove the engine compartment cover support rod from its fixed bracket and hook it into the groove of the engine compartment cover. Below are the functions of the bonnet: 1. Airflow diversion: By diverting airflow, air resistance can be decomposed into beneficial forces, contributing to the vehicle's driving stability. 2. Protection for the engine and surrounding pipeline fittings: Beneath the bonnet are crucial components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system. By enhancing the strength and construction of the bonnet, it effectively prevents adverse effects such as impacts, corrosion, rainwater, and electrical interference, ensuring the vehicle operates normally. 3. Assisting driving vision: The shape of the bonnet can effectively adjust the direction and form of reflected light, thereby reducing the impact of light on the driver.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.