···
Log in / Register

How long does it usually take for an appointment to be successfully processed?

5 Answers
StSawyer
07/29/25 6:21am

When scheduling exams for Subject 1, Subject 2, Subject 3, or Subject 4 through the Traffic Management 12123 platform, the system automatically reviews the application 5 days before the exam date. Candidates who pass the review will receive a confirmation SMS, typically sent around 3 days before the exam. Whether the appointment is successful or not, the vehicle management office will send an SMS notification. Below is relevant information about driver's license applications: 1. Small Cars: Applicants for small cars, small automatic transmission cars, or light motorcycles must be between 18 and 70 years old. 2. Trucks: Applicants for low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old. 3. Buses: Applicants for city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams must be between 21 and 50 years old. 4. Tractor Trailers: Applicants for tractor trailer licenses must be between 24 and 50 years old. 5. Large Passenger Vehicles: Applicants for large passenger vehicle licenses must be between 26 and 50 years old.

Was this review help?
1
5
Share
AutumnLee
08/12/25 9:43pm

I recently booked several car maintenance appointments, and the processing speed felt quite fast, especially when operating on the website—it only took a few minutes to complete. Usually, after submitting the request, their system automatically processes it or staff quickly review it, and once an available time is confirmed, they send an email or SMS notification. The whole process can take as little as 5 minutes or up to half an hour at most. During peak hours, such as weekend afternoons when booking a brake pad replacement, the wait might be slightly longer. It’s recommended to handle it on weekday mornings for higher processing efficiency. After successful booking, don’t forget to check the notification and wait for the specific date arrangement. Providing the car model and VIN number during booking can make the process smoother and avoid repeated back-and-forth delays. Some online platforms even have a real-time status bar, so you can see the processing progress at a glance. In short, don’t stress too much—in most cases, the booking is completed within 15 minutes, just keep your phone ready to receive messages. If multiple attempts fail, try switching to another service point or make a direct phone call to follow up. Remember to confirm promptly to lock in the maintenance time slot faster.

Was this review help?
12
4
Share
Expand All
LeAbel
10/04/25 2:57am

I think the acceptance time for appointments depends on the service and location. Some large 4S shops process quickly, with online submissions being accepted instantly, while small repair shops might take up to half an hour. Generally, receiving a notification within 10 minutes of successful acceptance means the review is complete and you can be queued. Factors affecting this include the type of appointment—simple maintenance is faster than complex repairs—and the company's scheduling; responses are slower during busy periods like holidays. It's advisable to book in advance on non-peak days. I usually use an app to make appointments, entering basic vehicle information is enough, and acceptance is quick. The key is to describe the issue clearly, such as engine noise, so staff can assess the time needed faster. After successful acceptance, communicate the specific schedule as soon as possible. For safety, after booking, keep an eye on your phone to not miss messages, in case notifications go to the spam folder. Overall, the average acceptance time is 10-20 minutes, not too long, so just be patient. Choosing efficient methods saves hassle and prevents delays in repair plans.

Was this review help?
18
0
Share
Expand All
StBeau
11/17/25 4:32am

Appointments are usually processed within minutes, especially with automatic confirmation after online submission. Just state your requirements over the phone, and the staff will enter them into the system, with quick notification of the scheduled time. Processing is fast, with most cases completed within 15 minutes. A successful acceptance means the request has been approved. Factors affecting speed include company system workload—simpler services are processed faster. During peak times, there might be slightly longer queues, so booking during off-peak hours is recommended. Preparing detailed vehicle information speeds up processing, and results are notified promptly for schedule adjustments.

Was this review help?
1
3
Share
Expand All
Ralph
01/07/26 6:09am

Appointment acceptance is usually very fast. I've seen customers receive confirmation SMS within seconds of submitting online. The general processing time refers to the review and allocation period, which typically takes 5 to 20 minutes. For phone appointments, after quickly providing the information, staff will check and confirm, completing the acceptance. You'll receive a notification to arrange a specific date upon successful acceptance. It's recommended to use the official app for faster form submission. Avoid peak hours like afternoons when processing may be slower. Check notifications promptly to avoid missing them and schedule maintenance appointments in time to ensure smooth vehicle servicing. Acceptance starts quickly, so don't worry and wait patiently—it usually takes a short time. There are significant differences between brands, so choosing a large company can lead to faster processing.

Was this review help?
10
0
Share
Expand All
More Forum Discussions

Why Does the Low-Pressure Pipe of a Car's Air Conditioner Feel Hot to the Touch?

The reasons why the low-pressure pipe of a car's air conditioner feels hot to the touch are: 1. Compressor or expansion valve malfunction; 2. Evaporator blockage, insufficient refrigerant flow, or excessively high pipeline pressure; 3. Excessive scaling in the condenser's copper pipes. A car's air conditioning system consists of a refrigeration system, heating system, air purification device, and control system, designed to regulate and maintain the temperature, humidity, air cleanliness, and airflow within the vehicle cabin at optimal levels. The car air conditioning system is responsible for cooling, heating, ventilating, and purifying the air inside the cabin, with the primary purpose of providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety.
4
1
Share

How to Replace the Battery in a Peugeot 4008 Key?

The steps to replace the battery in a Peugeot 4008 key are: 1. Press the mechanical key release button on the remote key to eject the mechanical key; 2. Use a screwdriver to insert into the groove and pry open the back cover of the remote key, then remove the back cover; 3. Take out the depleted battery, install a new battery, and reattach the back cover of the remote key. The Peugeot 4008 has the following dimensions: length 4510 mm, width 1850 mm, height 1628 mm, with a wheelbase of 2730 mm, a fuel tank capacity of 53 liters, and a curb weight of 1475 kg. It is equipped with a 1.6-liter turbocharged engine, delivering a maximum horsepower of 170 hp and a maximum power output of 125 kW.
14
2
Share

What is the difference between 0w and 5w?

The difference between 0w and 5w lies in their minimum applicable temperatures. 5W can be used in environments as cold as -30 degrees Celsius, while 0W can be used in environments as cold as -35 degrees Celsius. The following are some precautions to take when refueling your car: 1. Do not overfill the tank: If the tank is overfilled with gasoline, the high temperatures in summer, combined with the heat generated by the car itself, can cause the gasoline to expand. To prevent the fuel tank from rupturing due to the expansion of gasoline, there is a vent hole at the top. If the tank is overfilled, gasoline may overflow through the vent hole, which can lead to spontaneous combustion if exposed to an open flame, with potentially disastrous consequences. Additionally, gasoline overflowing through the vent hole can drip onto the car body, causing some corrosion. Overfilling the tank can also easily block the vent hole. Once the vent hole is blocked, the pressure inside the tank will drop below normal, leading to poor fuel supply or even a complete lack of fuel. Overfilling the tank also increases the car's weight, thereby increasing fuel consumption. Over time, the gasoline can deteriorate, posing a safety hazard. 2. Try to avoid refueling only when the fuel light comes on: While driving, always pay attention to the fuel gauge. When the pointer shows that only a quarter of the fuel remains, you should refuel. It is best not to wait until the fuel light comes on to refuel. Modern cars use electric fuel pumps, which require gasoline for lubrication and cooling. If you frequently wait until the fuel light comes on to refuel, the fuel pump may not receive adequate lubrication and cooling, ultimately reducing its lifespan. Additionally, if the tank is left empty for too long, the temperature difference between the inside and outside can cause moisture to form inside the tank, leading to corrosion, affecting fuel quality, and increasing the engine's burden.
7
4
Share

What Needs to Be Replaced and Maintained for a Five-Year-Old Car?

For a five-year-old car, the items that need to be replaced and maintained include engine oil and oil filter, air filter, windshield washer fluid, antifreeze, and air conditioning refrigerant. Detailed descriptions are as follows: The replacement of engine oil and oil filter is primarily for the maintenance of the lubrication system. These two items are the most basic yet the most important in maintenance. The function of the oil filter is to remove various impurities from the engine oil, ensuring the normal operation of the lubrication system. The oil filter should be replaced along with the engine oil during an oil change. The air filter is related to whether the engine breathes smoothly, and the cabin air filter affects the air quality inside the car. Both are quite important. During maintenance, they should be replaced according to the intervals specified in the maintenance manual. Windshield washer fluid, antifreeze, and air conditioning refrigerant are also crucial. Windshield washer fluid is actually related to safety; it must be replenished promptly when running low. In cold regions, it is essential to use antifreeze that can withstand low temperatures, meaning its freezing point should be lower than the local temperature. Otherwise, the washer fluid may freeze and potentially crack the reservoir. Air conditioning refrigerant should be added in the correct amount if the cooling effect is poor and it is found to be due to a lack of refrigerant after inspection.
6
4
Share

What are the configuration features of the Honda UR-V?

UR-V incorporates numerous cutting-edge technologies, especially in terms of active and passive safety configurations. The Honda SENSING safety system integrates comprehensive safety features such as CMBS (Collision Mitigation Braking System), LKAS (Lane Keeping Assist System), and CTM (Cross Traffic Monitor), eliminating various concerns in daily driving. Exterior Design: The UR-V adopts Honda's family-style exterior design, which is very stable. The grille and front bumper feature smooth and rounded shapes, while the chrome accents on the grille add more depth to the front fascia. The blade-style headlights are paired with diamond-cut light clusters, and the turn signals, fog lights, and daytime running lights all use LED sources. The new car also comes equipped with a series of convenient features such as automatic headlights and adaptive high/low beams. Powertrain: The new car offers two turbocharged engine options: a 1.5T and a 2.0T. The 1.5T engine delivers a maximum power of 142kW and a peak torque of 243Nm. The 2.0T engine produces a maximum power of 200kW and a peak torque of 370Nm.
12
4
Share

Can the Honda Life be driven on highways?

"The Honda Life can be driven on highways, but the speed should not be too high, around 100 km/h is recommended, otherwise the vehicle may feel unstable. Precautions for driving on highways: Fasten seat belts: Both the driver and front passenger must fasten their seat belts and ensure they remain fastened throughout the entire journey on the highway. Do not unfasten them midway, and never take the risk of not wearing them, as the consequences in case of an accident could be severe. Observe speed limits: Accelerate to at least 50 km/h quickly, moving from the ramp to the acceleration lane before entering the main lane, while taking care not to obstruct other vehicles already in the main lane. During normal driving, do not exceed the maximum or minimum speed limits on the highway to avoid accidents. Maintain a safe distance: Adjust the following distance based on your speed, referring to the distance markers on the roadside. While keeping a safe distance from the vehicle in front, also pay attention to the vehicle behind. In case of emergency braking, always check the distance of the vehicle behind to prevent rear-end collisions. Avoid unnecessary lane changes: Do not change lanes unnecessarily. If you need to overtake, signal in advance and only overtake vehicles in the adjacent lane. Do not overtake multiple vehicles consecutively. After overtaking, return to your original lane promptly and avoid driving on lane markings."
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.