How long does it take to successfully schedule a Subject 2 driving test appointment?

1 Answers
VonKathryn
07/25/25 12:42am
There is no unified timeframe for successfully scheduling a Subject 2 test appointment, as it depends on the number of applicants. If there are fewer applicants, the appointment can be successfully scheduled within three days. Upon successful scheduling, you will receive an SMS reminder three days before the nearest available test date. If the appointment fails, you will also receive an SMS notification. To schedule an appointment, open the "Traffic Management 12123" APP and navigate to the homepage. Click on "More" to enter the service center, find and click on "Driver's License Services," then select "Test Appointment." Choose an appropriate test center from the options provided by the system. Proceed to the "Test Appointment Service Instructions" page, wait for 5 seconds, and click the "Read and Agree" option at the bottom. Select your preferred test date and session based on your personal circumstances, then click the "Schedule" button at the bottom right to submit your appointment information. Enter the verification code received via SMS in the APP and click "Submit" to complete the appointment application. When scheduling a Subject 2 test appointment via the Traffic Management 12123 APP, selecting the "System Allocation Mode" can improve the success rate to some extent. Avoid choosing test centers marked as crowded; instead, opt for more remote locations, which are relatively easier to schedule successfully.
Was this review help?
13
2
Share
More Forum Discussions

How to Deal with Excessive Oil Temperature?

To reduce oil temperature, the common method is to 'reduce load and lower engine speed'. Here are the relevant details: 1. Coolant: Although the heat exchange time is longer at high-temperature components, slowing down the water flow rate will prolong the heat dissipation time. At the same time, due to the reduced load and lower engine speed, the heat generated by friction of moving parts is also reduced accordingly. Therefore, lowering the oil temperature can not only reduce the heat generated by the engine but also indirectly decrease the heat absorbed by the coolant, thereby slowing down the rate at which the coolant temperature rises. 2. Genuine Engine Oil: To prevent excessive oil temperature, car owners should regularly check the oil cooler, choose the correct grade and viscosity level of genuine engine oil, and avoid overloading the engine during use, especially prolonged overloading.
7
0
Share

What is the duration of the study-based point reduction cycle?

Study-based point reduction cycle lasts for 12 months. Here is more relevant information: 1. Relevant regulations: Drivers who participate in online study (accumulating 30 minutes within 3 days) and pass the exam can have 1 point deducted. Participating in on-site study (no less than 1 hour each time) and passing the exam can have 2 points deducted. Participating in traffic safety public welfare activities (1 hour each time) can have 1 point deducted. 2. Point reduction limit: There is no limit to the number of times you can participate in study-based point reduction, but when the point reduction for a motor vehicle driver reaches 6 points in a scoring cycle, they can no longer continue to participate in study-based point reduction. Only eligible drivers can have traffic violation points deducted by receiving education, with a maximum deduction of 6 points.
6
5
Share

What does the yellow triangle exclamation mark on Tesla's dashboard mean?

Tesla dashboard yellow exclamation mark light is the tire pressure warning light, which indicates abnormal tire pressure in one or more tires. Possible causes include a punctured tire, excessive tire pressure, prolonged driving with low tire pressure, or a malfunctioning tire pressure sensor. The details are as follows: Punctured tire: This situation usually involves very slow air leakage. If you cannot determine which tire is leaking, you can measure it with a tire pressure gauge. The front tires are generally 2.3bar, and the rear tires are generally 2.5bar. If there is insufficient air, you need to replenish it and then observe the tire pressure warning light. If it lights up again after a few days, you need to drive to a 4S store for repair. Excessive tire pressure: Car tires have specific inflation pressure requirements. Standard tires: 2.4-2.5bar; reinforced tires: 2.8-2.9bar; the maximum pressure should not exceed 3.5bar. Therefore, when a tire's pressure exceeds 3.0bar, the tire pressure warning light will be triggered. In this case, you can release some air to normalize the tire pressure. Prolonged driving with low tire pressure: This usually occurs when a tire's pressure is too low, causing the tire temperature to rise during high-speed operation, which in turn increases the tire pressure. In this situation, you should stop and rest or replace the spare tire promptly. Malfunctioning tire pressure sensor: The tire pressure sensor itself may malfunction, causing the tire pressure light to illuminate. You can use a diagnostic tool to read the fault code and then determine which tire pressure sensor is faulty by replacing the fault code.
17
4
Share

Is the Roewe RX5 New Energy a pure electric vehicle?

The Roewe RX5 New Energy is available as a pure electric vehicle and also as a plug-in hybrid model. The pure electric version is a single-motor vehicle. Here are some details about the Roewe RX5: 1. Name Origin: "R" stands for internet SUV, and "X" represents infinite possibilities. "R" symbolizes the internet SUV, reflecting Roewe's brand philosophy of "Technology with Style, Understanding Your Needs." "X" signifies infinite possibilities, indicating that the Roewe RX5 will embrace "digital empowerment and automotive connectivity." The Roewe RX5 features a stylish and dynamic line design, with dual waistlines on the sides, chrome-trimmed side windows, and roof rails. 2. Exterior Design: Adopting the "Rhythm Design" language, it features a matrix LED headlight assembly with 24 LED light sources. The body lines are sleek and dynamic, with dual waistlines on the sides and roof rails. The overall design is rhythmic and full of tension. 3. Interior Design: The interior follows a minimalist and stylish design philosophy. The Roewe RX5's interior is based on the "Rhythm Design" concept, with a simple and elegant style. The dashboard is wrapped in leather and features a red-and-black color scheme. Aluminum trim accents run throughout the cabin. The highlight is a 10.4-inch full HD capacitive touchscreen angled toward the driver, ensuring safety while providing a more convenient control experience. 4. Powertrain Options: Offers 1.5T and 2.0T engine choices. Built on the new SSA platform, the initial models are equipped with SAIC's "Blue Core" traditional powertrain system, offering 1.5T and 2.0T engine options.
9
5
Share

Where is the trunk switch located on the Tiguan L?

The trunk switch of the Tiguan L is located below the driver's door armrest. Here are detailed introductions about the Tiguan L: 1. Overview: The Tiguan L is produced by SAIC Volkswagen, offering a total of 7 models equipped with 1.8T (330TSI) and 2.0T (380TSI) engines. It also provides 2 hybrid models: the Hybrid Luxury Edition and the Hybrid Flagship Edition. 2. Others: In terms of exterior design, the Tiguan L maintains a similar design to the overseas standard Tiguan model, featuring a clean and lively overall style. Compared to the standard wheelbase model, it adds chrome decorative elements. The C-pillar design has also been modified. The Tiguan L measures 4712/1839/1673mm in length, width, and height, with a wheelbase of 2791mm.
1
5
Share

What is the K3 car?

K3 is a compact sedan under the Kia brand. This model is equipped with a 1.5L naturally aspirated engine and a 1.4L turbocharged engine. Below are the detailed introductions: 1. The 1.4L turbocharged engine, codenamed G4LD: This engine has a maximum power of 96kW, a maximum torque of 211 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1400 to 3700 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The 1.5L naturally aspirated engine, codenamed G4FL: This engine delivers a maximum power of 85kW, a maximum torque of 143.9 Nm, a maximum power speed of 6300 rpm, and a maximum torque speed of 4500 rpm. It utilizes multi-point fuel injection technology and also employs an aluminum alloy cylinder head and block.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.