How long does it take to replace the front windshield at a 4S store?

1 Answers
LaKarter
07/29/25 7:59pm
It takes 12 hours to replace the front windshield at a 4S store. Here are the relevant details: 1. Windshield: It is adhered to the car body with glass adhesive. Since the adhesive takes a long time to cure (usually more than 12 hours at room temperature), the car should not be moved until the adhesive is completely dry after replacing the windshield. This prevents issues such as glass misalignment, adhesive failure, or water leakage due to insufficient curing. 2. Precautions: Avoid washing the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Try to avoid driving on excessively bumpy roads and refrain from sudden braking or rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard.
Was this review help?
20
0
Share
More Forum Discussions

Why does the brake fail after the engine is turned off?

The reason why the brake fails after the engine is turned off is: When the vehicle is turned off, the engine stops working and no longer generates vacuum, causing the brake booster to disappear and making the brake pedal difficult to press. Below is relevant information: 1. Introduction to brakes: Brakes, also known as stopping devices, refer to the action of stopping or reducing the speed of running locomotives, vehicles, other transportation tools, or machinery. 2. Principle: When the engine is running, pressing the brake pedal closes the vacuum valve under the action of the push rod, while the air valve at the other end of the push rod is opened. After air enters, it creates an unbalanced air pressure state in the chamber. Under negative pressure, the diaphragm is pulled towards the brake master cylinder, thereby driving the push rod of the brake master cylinder, which further amplifies the leg force.
6
0
Share

What Are the Reasons Why the Reversing Radar Does Not Alarm?

The reversing radar system's working power supply and grounding circuit not illuminating can cause this issue. Common fault points include a missing power supply to the reversing radar controller, a loose connection in the reversing radar probe plug, a damaged buzzer, or a loose connection in the buzzer plug. During troubleshooting, it is necessary to refer to the circuit diagram of the relevant vehicle model to locate the corresponding lines. Below is additional information about reversing radars: 1. Reversing Radar: The full name is "Reverse Anti-Collision Radar," also known as a "Parking Assistance Device." 2. Principle of Reversing Radar: It mainly consists of an ultrasonic sensor, controller, and display (or buzzer). When the gear lever is shifted into reverse, the reversing radar automatically starts working. When the radar detects that the distance to an obstacle behind the vehicle is too close, the buzzer or display device of the reversing radar will issue a warning to remind the driver to pay attention to the distance behind.
8
2
Share

What to Do If the Compulsory Insurance Label Is Lost?

If the compulsory insurance label is lost, the handling methods vary depending on different situations. Here are the relevant introductions: 1. Personal vehicles: If the vehicle is registered under an individual's name, after the compulsory insurance label is lost, the owner needs to bring their ID card, vehicle license, and compulsory insurance procedure certificate to the insurance company where the vehicle is insured to apply for a replacement of the compulsory insurance label. 2. Company vehicles: If the insured vehicle is registered as a company vehicle, the owner needs to bring the insurance policy, power of attorney, and the identity proof of the handler to the underwriting company to apply for a replacement of the compulsory insurance label. Additionally, a compulsory insurance label replacement application form needs to be filled out. 3. Damaged label: If the compulsory insurance label is damaged, the owner needs to bring the old insurance label to the insurance company for a replacement.
5
4
Share

What brand of transmission oil does BMW use?

BMW uses ZF brand transmission oil. Here is some information about transmission oil: 1. Function: Transmission oil is a lubricant used to keep the gear system clean, ensuring the normal operation of the transmission and extending the lifespan of the transmission components. 2. Classification: Depending on the transmission structure, transmission oil is divided into manual transmission oil and automatic transmission oil. Manual transmission oil, commonly referred to as gear oil, is primarily made from petroleum-based lubricating oil or synthetic lubricating oil, with the addition of extreme pressure anti-wear agents and oiliness agents. Automatic transmission fluid (ATF) is specifically designed for automatic transmissions. It serves as the hydraulic fluid for the torque converter, the lubricant for the planetary gear structure, and the hydraulic oil for the shifting mechanism.
19
0
Share

What are the precautions for registering for a driver's license test?

When registering for a driver's license test, pay attention to the following precautions: 1. Verify the driving school's qualifications: Legitimate driving schools not only have a business license but also possess a road transport permit, etc. 2. Ensure that enrollment staff do not make arbitrary promises: Protect your own interests from being violated. 3. Check for additional fees: Pay attention to whether the price is all-inclusive and whether there are any other additional charges during the process. Generally, the more all-inclusive the price, the less likely there are to be random fees. 4. Confirm if there are any restrictions on practice time: If there are time restrictions, clarify the exact amount of practice time available to ensure you have sufficient time to learn and practice driving.
3
2
Share

How long can a car run continuously on the highway?

Continuous driving of a motor vehicle for more than 4 hours should be accompanied by a rest stop, with the rest period lasting no less than 20 minutes. Assuming an average highway speed of 100 km/h, 1 hour equates to 100 kilometers. This means that after driving 400 kilometers on the highway, the driver needs to stop and rest at a service area. Precautions for highway driving are as follows: 1. Pay attention to speed: Avoid driving too slowly, with speeds not falling below 80 km/h. 2. Do not occupy the emergency lane: In the event of an accident, the emergency lane serves as a lifeline. Moreover, the penalties for illegally using the emergency lane are quite severe, including a fine of 200 yuan and a deduction of 6 points from the driver's license.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.