···
Log in / Register

How long does it take to reissue a vehicle license on 12123?

4 Answers
VanPeyton
07/28/25 8:32pm

Reissuing a vehicle license on 12123 usually takes 3 to 5 working days, and holidays or weekends will extend the processing time. Steps to reissue a vehicle license: 1. Open the 12123 mobile app; 2. Click the "More" menu on the homepage; 3. Enter the business center, find "Replace Damaged Driver's License" and enter the application page; 4. Enter the required information on the page and click "Next"; 5. Choose the delivery method, submit for review, and once approved, the reissuance will be successful. The vehicle license is the legal document permitting a motor vehicle to drive on roads within China. It consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the endorsed license core, the back has the vehicle photo sealed in plastic, and the supplementary page contains another endorsed license core.

Was this review help?
13
3
Share
RosalieDella
08/12/25 12:14am

I've processed the replacement of my vehicle license several times on the 12123 APP, and the procedure is generally smooth. The review is quick after submitting the application—last time I applied on Tuesday morning and it was approved by Wednesday noon, then the mailing took two days and arrived at my home on Friday afternoon. The total duration didn’t exceed five days, though it might be slower during peak periods like holidays, but overall the efficiency is high. I recommend preparing clear photos of both sides of your ID card and a scanned copy of the vehicle registration certificate in advance to avoid rework. After online payment, you can just wait for the delivery, saving the hassle of visiting the DMV—this is my favorite part to share with fellow car owners. Remember to choose a good time to submit your application, avoiding weekends, to speed up the process.

Was this review help?
3
1
Share
Expand All
OOmar
09/30/25 7:26am

As a regular car owner who often deals with these matters, I find the time taken to reissue a vehicle license quite reasonable. After applying on the 12123 APP, the initial review usually takes 1-3 days, with the speed depending on whether the documents are complete. I recommend double-checking everything before submission. During the mailing phase, urban areas take 1-2 days, while remote areas may take a few more days, averaging a total of 4-7 days to receive the new license. Once, I forgot to upload the VIN, which caused a delay, and I had to wait ten days to resolve it. So now, I always carefully follow the APP prompts to ensure zero mistakes. Overall, it's quite convenient and suitable for busy people, as it only takes a few steps on the phone to get it done.

Was this review help?
2
3
Share
Expand All
DiLilliana
11/14/25 2:30am

Using the 12123 app to reapply for a vehicle license felt quick and simple. I submitted the application on the same day, and it showed 'under review' by evening. It was mostly approved the next day. With mailing included, I received it within two days, usually completing the whole process in three days. I often use this feature—easily upload photos, make the payment, and just wait for the delivery. The electronic version can also be used temporarily in emergencies. Avoiding complicated steps, even beginners can handle it effortlessly with just a few minutes of phone operation, saving both worry and money.

Was this review help?
5
0
Share
Expand All
More Forum Discussions

What is the fuel consumption for one hour of idling in place?

Idling in place for one hour consumes approximately 0.6 liters of fuel. Below is an introduction to idling: Introduction: Idling is an operating condition of a car, referring to the engine running in neutral gear. Diagnosis of unstable idling: Uneven fuel injection from the injectors or poor atomization can cause an imbalance in the power output of each cylinder. If the oil pressure is too low, the fuel sprayed from the injector may have poor atomization or form a line, and in severe cases, only droplets may be sprayed, reducing the fuel injection and making the mixture too lean. If the oil pressure is too high, the actual fuel injection increases, making the mixture too rich. Faults in sensors or wiring can lead to incorrect commands from the control unit, resulting in improper fuel injection, causing the mixture to be too rich or too lean, which are indirect causes of unstable idling.
2
5
Share

What is the fuel consumption of the Peugeot 3008 1.6t?

8.0L/100km. Here are the detailed specifications of the Peugeot 3008: 1. Overview: The Peugeot 3008 is a stylish mid-size crossover SUV, launched in January 2009 and entered the Chinese market in December 2010. The Peugeot 3008 has both domestic and imported versions. The imported version for the Chinese market is divided into Fashion and Luxury models. 2. Others: The wheelbase is 2613mm. The vehicle dimensions are 4428mm×1840mm×1652mm. The trunk capacity is 503L/512-1604L. The fuel consumption ranges from 6.4 to 8.8L/100km. The fuel tank capacity is 60L. The engine types are 1.6T-L4 or 2.0L-L4. The top speed is 204km/h. The acceleration time is 10 seconds for 0-100km/h. The drive type is front-wheel drive.
14
0
Share

What are the dimensions of a double-axle vehicle?

The specific dimensions of double-axle vehicles vary depending on the model. Here is an introduction about double-axle vehicles: Introduction: Rear eight-wheeler: Also known as a rear eight-wheeler dump truck or double-axle vehicle. It refers to a vehicle that unloads cargo by hydraulic or mechanical lifting. Also known as a tipper truck. It consists of components such as the vehicle chassis, hydraulic lifting mechanism, cargo compartment, and power take-off device. Working principle: The engine, chassis, and cab structure of a dump truck are the same as those of a general cargo truck. The cargo compartment of a dump truck can tilt backward or sideways, controlled by a piston rod movement system. Backward tilting is more common, where the piston rod pushes to tilt the compartment, while a few models allow bidirectional tilting. High-pressure oil enters the lifting hydraulic cylinder through the distribution valve and oil pipe, with the front end of the compartment featuring a 58 Automobile cab safety guard plate.
14
0
Share

What is the reason for the ABS light and the skid light coming on simultaneously?

When the ABS and skid lights of a car come on simultaneously, it indicates a malfunction in the vehicle's anti-skid system. Relevant explanations are as follows: 1. When the ABS malfunctions: It is advisable not to continue driving. Alternatively, rely on the conventional braking system to proceed to an auto repair shop as soon as possible. During the journey, drive cautiously, slowly, and steadily, avoiding aggressive driving. A malfunction in the anti-lock braking system can also affect the ESP anti-skid system. A fault in the anti-skid system may cause the vehicle to skid during emergency braking or sharp turns, which is extremely dangerous. 2. Solution: If the car's anti-skid system is malfunctioning, it is necessary to promptly visit the car's 4S store or a repair shop to inspect and repair the anti-skid system. This will resolve the issue of the ABS and skid lights coming on simultaneously.
2
0
Share

Is it illegal if the letters on the back of the car fall off?

It is not illegal if the letters on the back of the car fall off, as long as the car logo remains untouched. Below is relevant information about vehicle inspection: 1. Regulations: New cars do not require on-site inspection within the first 6 years, and you can directly obtain the inspection compliance mark. However, after 6 years (including 6 years), an annual inspection is required, and the car must be driven to the inspection site. 2. Notes: For non-commercial passenger cars and other small and mini passenger vehicles (excluding vans and vehicles with 7 or more seats) registered within 6 years, a biennial periodic inspection is required. The vehicle owner can directly apply to the traffic management department of the public security authority for the inspection mark by providing proof of compulsory traffic accident liability insurance and tax payment or exemption proof for vehicle and vessel tax, without the need for a safety technical inspection at an inspection institution. Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle.
6
2
Share

What is the first-cut oil?

First-cut oil refers to the oil produced by the crude oil vacuum distillation tower. The introduction of first-cut oil is as follows: 1. Introduction to first-cut oil: It is mainly divided into first-cut to fourth-cut according to different boiling points, with the boiling point increasing progressively. Among them, first-cut oil is the basic raw material for producing lubricating oil, and the first-cut oil is of better quality and can also be used for blending diesel. Compared with ordinary base oil, first-cut oil is a non-standard oil. Through processes such as solvent deasphalting, solvent dewaxing, solvent refining, hydrofining or acid-base refining, and clay refining, substances that form free carbon, low viscosity index substances, substances with poor oxidation stability, paraffin, and chemical substances that affect the color of finished oil are removed or reduced to obtain qualified lubricating base oil. 2. The main indicators of first-cut oil: density, freezing point, color, viscosity, flash point, etc.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.