How long does it take to receive a notification for running a red light?

1 Answers
IslaAnn
07/25/25 4:05pm
After running a red light, the notification message for the violation is usually received within 3 to 7 days, and at the latest within about 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. But this notification does not confirm a violation; it only serves as a capture alert. The final determination of whether it is a violation takes 3-7 days. If it is confirmed as a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation SMS immediately. There is a delay, and the duration may vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then verified by relevant traffic police personnel. Once the violation is confirmed, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. Only then does the owner receive the corresponding violation message. After receiving the violation SMS, the vehicle owner must handle it at the local traffic police department or online within one month before the annual vehicle inspection. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received within 15 days, it is likely that no violation was recorded. Traffic violation query methods: Traffic violation queries refer to checking motor vehicle violations of traffic regulations through online platforms or query terminals. Methods include website queries, phone queries, SMS queries, mobile app queries, and offline terminal queries. Website query: You can search for "vehicle violation query" and enter vehicle information to check. Phone query: To inquire about violations, you can call the local 114 (area code + 114) or 12580 for confirmation. Violations can only be processed at the location of the violation or the vehicle license plate issuance location. For on-site violations, such as those caught directly by traffic police, they must be handled at the violation location. SMS query: Open the SMS interface on your phone, enter "WZ" followed by the license plate number and color, and send it to 1062650001. Mobile app query: Open the "Traffic Management 12123" app, select "Violation Query," and find unresolved violations to clear them. Offline terminal query: Visit the local traffic management hall and use the self-service query machine to enter the license plate number and check recent violation records.
Was this review help?
19
1
Share
More Forum Discussions

What are the steps to eliminate the wrench light on Mazda CX4?

First, press the one-touch start button of the CX5. Then press the INFO button on the left side of the multifunction steering wheel, followed by the SET button on the right side of the steering wheel. At this point, the central LCD screen will display the vehicle maintenance information. Finally, press the OFF button at the lower right of the steering wheel, and the small wrench light will be eliminated. If the engine oil is not replaced for a long time, it will cause significant harm to the engine. The lubrication effect will not be as effective as before, and the wear between parts will increase.
13
1
Share

Where is the dash cam connector located?

The dash cam connector is located in the fuse box, where it is wired to the fuse box via concealed wiring. This approach offers two advantages: firstly, the wiring is well-hidden for a cleaner appearance, and secondly, it does not occupy the cigarette lighter or USB port, which can then be used for charging mobile phones. The steps for wiring the dash cam are as follows: 1. To connect to the fuse box, there are specific requirements for the dash cam—only those with voltage regulators integrated into the wiring can be used; 2. The wiring method involves concealed wiring, which can be routed from the headliner along the A-pillar to the fuse box; 3. Power is drawn from the cigarette lighter fuse; 4. Remove the cigarette lighter fuse and use a test light to check the fuse socket—one contact should have power while the other does not. Wrap the non-powered end of the fuse leg and reinsert the fuse to complete the installation.
2
2
Share

How to Solve the High Fuel Consumption Issue of Haima Family Star?

After opening the engine cover, check each sensor connector one by one for looseness or breakage, gently adjust and reconnect each sensor; After removing the spark plugs, inspect their basic condition and find slight electrode erosion and minor carbon deposits; After inspection, it is suspected that the intake system has a fault causing excessive fuel consumption. Therefore, the air filter is removed for inspection, and it is found to be still usable; After cleaning the intake system components mentioned above, reassemble and restart the vehicle for inspection. Conduct acceleration tests to check for any exhaust pipe leaks; Then, thoroughly inspect the entire fuel system pipeline once again, and no fuel leaks are found after a detailed examination.
18
1
Share

What to Do When the Lavida Fails to Start?

If the battery is diagnosed as discharged, a jump start for the engine is required. Check the fuel gauge; if the fuel needle points below the E mark, it indicates that the fuel has been depleted, and refueling is necessary. If there is still fuel remaining, inspect whether the spark plugs and ignition coils are securely connected, and ensure the ignition coils are properly attached to the wiring harness connectors. If the engine makes a knocking sound with noticeably reduced performance and the temperature gauge shows overheating, it is essential to cool the xenon engine by parking the vehicle in a safe location and turning off the air conditioning.
9
0
Share

How to Cancel the Maintenance Light on the Refine S3?

The method to reset the maintenance light on the Refine S3 is: 1. Press the reset button and turn off the ignition switch; 2. Hold the reset button until the mileage is no longer displayed; 3. Hold the reset button and turn on the ignition again to reset. The functions of the maintenance light are: 1. To record the mileage of important components; 2. To remind the owner to perform maintenance. More relevant information is as follows: The Refine S3 is a compact SUV with body dimensions of length 4345mm, width 1765mm, height 1640mm, a wheelbase of 2560mm, and a fuel tank capacity of 45l. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kw and a maximum power speed of 6000rpm.
2
3
Share

What causes the inability to accelerate the throttle right after starting the car?

Here are the reasons why the throttle cannot be accelerated right after starting the car: 1. Incorrect valve timing, such as poor sealing of intake and exhaust valves. 2. Poor performance, short circuit, or burnout of the fuel pump due to internal or wiring issues, leading to insufficient or stopped fuel supply. 3. Blockage in the intake system, such as the air filter or air flow meter, preventing proper combustion with fuel. 4. Internal engine faults, improper maintenance, premature or abnormal wear, cylinder pressure issues, or other potential problems. 5. Blockage in the fuel system, such as the injector, fuel filter, or poor fuel quality. 6. Abnormal spark plug ignition, aging components, exceeding normal lifespan, carbon deposits, or incorrect model selection (e.g., heat value). 7. Poor performance of the ignition system, such as spark plugs or high-voltage wires.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.