···
Log in / Register

How Long Does It Take to Perform the First Maintenance on a Car?

4 Answers
LaHadley
07/29/25 1:51am

Performing the first maintenance on a car typically takes 1 to 2 hours. The first maintenance items include: 1. Changing the engine oil and oil filter, cleaning the air filter, and checking for any damage to the generator belt and wiper blades; 2. Checking the levels of various fluids to ensure they are normal; 3. Inspecting tire pressure and checking for uneven wear, bulges, or damage; 4. Examining the car's chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verifying that all switches and lights in the car are functioning properly. The benefits of the first maintenance include: 1. Ensuring the vehicle maintains excellent performance; 2. Enhancing driving safety; 3. Reducing engine noise; 4. Extending the vehicle's lifespan.

Was this review help?
15
4
Share
LaMaddox
08/12/25 11:48am

I've been driving for several years and have gone through quite a few first services. Generally, core maintenance like oil and filter changes can be done in as little as 30 minutes, but the total time spent could be 1-2 hours, depending entirely on how busy the dealership is. Without an appointment, most of the time is spent waiting in line; with an appointment, you can be out in 40 minutes. The first service also includes basic checks like tires and brakes—don’t miss out on the free services. It’s crucial for your new car’s health, extending engine life and avoiding major repairs down the line. Plan your time ahead, bring your purchase documents, and don’t exceed the recommended mileage or time—this ensures a smoother break-in period. In short, a small investment brings big protection—don’t skip it!

Was this review help?
9
0
Share
Expand All
ClaytonLee
10/02/25 3:10am

I'm the type who values efficiency, so I usually schedule my first car maintenance during off-peak hours, keeping it within an hour. The core task like an oil change takes just over 20 minutes, but waiting for service and inspections can stretch it to 1-1.5 hours. Remember to make an appointment; otherwise, getting stuck in weekend crowds wastes even more time. The service is straightforward: oil change, fluid level checks, and system diagnostics. The first maintenance for a new car is usually free—just bring the manual. Don't delay this; missing the first maintenance period might void the warranty and even reduce fuel efficiency. Pay attention to driving habits, like avoiding sudden braking, to make the first maintenance smoother and more efficient.

Was this review help?
8
2
Share
Expand All
DawsonDella
11/15/25 4:54am

As a car enthusiast, let me talk about the details of the first maintenance. It can take as short as 30 minutes or as long as 60 minutes, depending entirely on how fast the technician works. Basic oil and filter changes are quick, but checking the brakes and suspension might add an extra 10 minutes. Booking an appointment is the most hassle-free option; without one, expect to wait in line for 1-2 hours. Don’t overlook this small step: it ensures fresh oil circulates through the engine, reducing wear and extending its lifespan by tens of thousands of kilometers. If the car model is complex or has additional requirements, the time may slightly increase. Prepare in advance to avoid compromising driving safety!

Was this review help?
18
0
Share
Expand All
More Forum Discussions

What is the curved panel above the wheel called?

The curved panel above the wheel is called a fender. Fender: The fender is a body outer panel that covers the wheel, named for its resemblance to a bird's wing in shape and position on older vehicle bodies. Based on installation location, it is divided into front fenders and rear fenders. The front fender is installed at the front wheel area and must ensure maximum clearance for wheel rotation and jumping. Therefore, designers use "wheel travel diagrams" to verify whether the fender's design dimensions are appropriate based on the selected tire model and size. Fender location: The fender is positioned above the vehicle's wheels, serving as the outer panel on the vehicle's side, and is molded from resin. The fender consists of an outer panel section and a reinforcement section integrally formed from resin. The outer panel section is exposed on the vehicle's side, while the reinforcement section extends along the edge of the outer panel section adjacent to neighboring components. Additionally, an engagement section for fitting with adjacent components is formed between the outer panel's edge and the reinforcement section.
9
2
Share

Can Temporary License Plate Speeding Violations Be Captured?

Temporary license plate speeding violations can be captured. Here are the detailed explanations: Current surveillance facilities are highly intelligent: High-definition surveillance cameras are installed on highways to capture speeding, illegal parking, and other violations 24/7. Additionally, mobile speed detection vehicles patrol highways continuously. Many intersections are equipped with smart electronic police, and road patrol officers have significantly increased, equipped with body cameras, forming an evidence chain to collaboratively enforce traffic laws. Penalties for speeding: Speeding within 10% results in a warning. Speeding between 10%-20% incurs 3 penalty points, 20%-50% incurs 6 points, and exceeding 50% incurs 12 points, along with varying fines.
4
3
Share

Can an A2 driver's license with 9 points deducted be reviewed on 12123?

It cannot be reviewed on the 12123 platform. It is recommended to bring your ID card, driver's license, and vehicle registration certificate directly to the traffic police station's violation handling window for verification. Annual Review Considerations: During the annual review, the vehicle management office will inspect the vehicle's lighting. If the vehicle's lights are found to be too dim or too bright, it will be deemed unqualified and will not pass the annual review. If the lights are too dim, check the lighting circuit and bulbs for aging, and replace the relevant components if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the annual review to pass the inspection. Annual Review Procedures: First, after submitting the review application, the vehicle will undergo an online inspection. The vehicle will be driven into the automatic inspection area to sequentially check whether the exhaust emissions, speed, lighting, side slip, and chassis meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy. Then, the body appearance will be inspected, including details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle registration certificate and qualification label. If any items fail, the owner must repair them and participate in a re-inspection until they pass before proceeding with the visa procedures.
17
0
Share

Is There Intentional Elimination in Subject 2 Driving Test?

Subject 2 does not involve intentional elimination. As long as you truly master traffic regulations and driving skills, you will definitely pass the Subject 2 test smoothly. Content of Subject 2 assessment: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It is the abbreviated term for the field driving skills test. For the C1 license, the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curve). Some regions may include a sixth item: highway toll card collection. For the C2 license, the test includes four mandatory components: reverse parking, parallel parking, right-angle turns, and curve driving (commonly known as S-curve). Precautions for Subject 2 test: When performing reverse parking, pay attention to controlling the speed. Starting must be completed within 30 seconds; during parallel parking, maintain a proper 30cm side distance and reference points; during curve driving, adjust the vehicle body slowly to ensure the wheels do not cross the lines; during right-angle turns, find the right moment to steer the wheel.
3
5
Share

What does one-touch power window mean?

One-touch power window refers to a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. Overview of one-touch power window: The one-touch power window function is a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. It is mainly designed for the convenience of drivers and passengers, avoiding the distraction caused by manually operating the windows and thereby improving safety. Usage method: When using it, you need to hold down the switch, and release the button when the window reaches the desired position, stopping the movement. Cars equipped with one-touch power windows have a two-stage window control switch. The first stage functions the same as a regular power window. The second stage allows you to press and release the button, and the window will automatically open or close completely.
8
4
Share

How many inspections per year are required for a car after 15 years?

Twice. Below are the relevant details: 1. Regulations: Small and micro non-operational passenger vehicles must undergo inspection once every 2 years within the first 6 years; once every year after exceeding 6 years; and once every 6 months after exceeding 15 years. 2. Requirements: During power inspection for private vehicles, the chassis output power must not be lower than 60% of the engine's rated power or 65% of the maximum net power. Additionally, the new standard stipulates that vehicles failing safety or environmental standards during an inspection cycle will be mandatorily scrapped. The power inspection will replace the current fuel consumption test to phase out vehicles with poor performance indicators.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.