How long does it take to order a BYD Dolphin?

1 Answers
BryceDella
07/24/25 4:12am
BYD Dolphin ordering time varies depending on the specific situation of the 4S store. Precautions for ordering a car: Precautions for ordering a car include paying attention to the model price, vehicle information, and the order contract. Model price: Before placing an order, you can research the model online in advance. Vehicle information: Confirm the model number, chassis number, etc. of the car you are purchasing to avoid any changes when picking up the car. Order contract: Before signing the contract, negotiate the price and any freebies, and pay attention to the order type when drafting the contract. Refund of the car order deposit: Consumers can get a refund for the car order deposit. According to regulations, if a party pays a deposit, guarantee, bond, earnest money, or order fee, but there is no agreement on the nature of the deposit, and the party claims the right of deposit, the court will not support it. This shows that the order fee does not have the nature of a deposit. Legally speaking, even if the party paying the order fee breaches the contract, the receiving party should still refund it.
Was this review help?
13
4
Share
More Forum Discussions

Which countries have the steering wheel on the right?

Countries with the steering wheel on the right include Japan, Thailand, India, Indonesia, Pakistan, Ireland, the UK, etc. The method to remove the steering wheel: 1. Disconnect the battery; 2. Turn the steering wheel approximately 90 degrees; 3. Insert a flat-head screwdriver into the hole behind the steering wheel; 4. Insert the screwdriver head between the retaining spring and the airbag hook, the airbag will automatically pop slightly toward the seat; 5. Turn the steering wheel 180 degrees and continue to release the retaining spring; 6. Remove the airbag, unclip the yellow safety latch behind the airbag, and take out the airbag; 7. Unplug the airbag coupling coil connector inside the upper part of the steering wheel, use an M12 spline to loosen the central fixing bolt counterclockwise; 8. Remove the steering wheel.
18
1
Share

What are the methods for beginners to avoid mistaking the accelerator for the brake?

Beginners can avoid mistaking the accelerator for the brake by: 1. Developing the habit of stepping on the brake with the right foot when not accelerating; 2. Keeping the foot on the brake when not pressing the accelerator. The working principle of the accelerator is: When the accelerator pedal is pressed, it directly controls the throttle valve, causing the throttle opening to increase, which allows more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, increasing the engine speed and accelerating the vehicle. The brake system consists of a vacuum booster pump, master brake cylinder, wheel brake cylinder, brake pads, and brake discs. Methods for brake maintenance include: 1. High-temperature protection; 2. Cleaning oil stains, dirt, and friction dust from the brake discs, brake drums, and any related parts to ensure good heat dissipation of the brake discs; 3. Regularly replacing brake fluid; 4. Regularly checking the thickness of brake pads or brake shoes.
20
1
Share

How to Replace the Battery in a Ford Remote Key?

Ford key battery replacement method: 1. Locate a small switch on the back of the car key, pull it to release, then grasp the metal part and pull it upwards to remove the mechanical key. 2. After removing the mechanical key, you will see a small groove in the middle of the key. Use the head of the mechanical key to pry open the key cover. 3. Once the key cover is opened, you can see the battery inside. Remove and replace the battery. Precautions are as follows: 1. Improper battery replacement may damage the car key. 2. Using unsuitable or non-compliant batteries may damage the car key. The battery's rated voltage, size, and specifications should be the same. 3. Following the steps correctly for battery replacement usually poses no issues. If problems arise during the process that cannot be resolved, it is recommended to call a 4S store for assistance. 4. If the unlock button is frequently pressed outside the operational range, the car may no longer be unlocked or locked using the remote key.
7
2
Share

Should You Apply Light Braking When Going Straight at an Intersection Ahead?

According to traffic regulations, it is necessary to slow down when approaching an intersection, so braking should be applied for safety. Situations requiring braking are as follows: Going straight through an intersection: For this scenario, not only should you brake in advance to reduce speed, but the speed when passing through the intersection should also not exceed 30km/h. Pedestrian crossings: Similar to passing through an intersection, apply the brake in advance to slow down. If there are pedestrians crossing, you must stop to yield and wait until they have completely passed before proceeding. Bus stops: Some regions may provide audio prompts for this scenario, while others may not. Candidates should not rely too heavily on audio prompts and should instead observe roadside signs in advance. Upon spotting a bus stop, estimate whether it is within 30 meters and then apply the brake to slow down. U-turns: When making a U-turn, it is essential to reduce speed and shift down to first gear before executing the maneuver. Setting aside examination requirements, attempting a U-turn at high speed or in a high gear can destabilize the vehicle and lead to dangerous situations, including rollovers.
15
3
Share

What causes the SWM X7 to feel like it's braking when starting?

The reasons why the SWM X7 feels like it's braking when starting are: 1. Improper operation causing the clutch fulcrum to be out of sync; 2. Faults in the brake system or vacuum booster assembly. Taking the 2021 SWM X7 as an example, its body structure is a 5-door, 6-seat SUV with dimensions of: length 4710mm, width 1855mm, height 1773mm, and a wheelbase of 2750mm. The 2021 SWM X7 features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 220Nm, paired with a 6-speed automatic transmission.
1
0
Share

What are the reasons for the windshield wipers not working?

The reasons for the windshield wipers not working are: 1. Dislocation of the transmission linkage; 2. Fuse damage; 3. Damage to the wiring and turn signal combination switch; 4. Windshield wiper motor damage. The replacement method for windshield wipers is: 1. Lift the wiper upright; 2. Press the clip below to remove the wiper blade; 3. Remove the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and the replacement is complete when you hear a clicking sound. The function of windshield wipers is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. The maintenance methods for windshield wipers are: 1. Use windshield washer fluid to clean the front windshield; 2. Regularly clean or replace the wiper blades; 3. Replace the linkage components.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.