How long does it take to make a driver's license after passing the test?

1 Answers
LaJohnny
07/29/25 11:21pm
It usually takes one working day to make a driver's license after passing the test. Here are the ways to receive the driver's license: 1. Issued on the spot after passing the test; 2. Mailed to you: If you choose to have the driver's license mailed, the DMV will send it to the address provided during registration, and it usually takes about a week to receive it; 3. Pick it up at the driving school; 4. Pick it up at the DMV: If you choose to pick it up yourself, you can go to the DMV to get it on the same day or the next day. Here are some important notes after passing the driving test: 1. Do not drive without a license: You cannot drive until you receive your driver's license. 2. Probation period requirements: There is a probation period after obtaining the driver's license, with different requirements, but the probation period is always one year. You must display a probation sign and cannot drive on highways unless accompanied by a driver with at least 3 years of driving experience.
Was this review help?
13
4
Share
More Forum Discussions

Does driving a new car at 120 km/h on the highway affect the car?

Driving a new car at 120 km/h on the highway does affect the car because new cars are not supposed to reach 120 km/h on the highway during the break-in period. Below are some precautions during the break-in period for new cars: 1. Driving speed: Although new cars have undergone initial break-in at the factory, the surfaces of the parts are still relatively rough. During the break-in period, it is essential to control the driving speed and avoid high speeds. The recommended speed is between 50~80 km/h. 2. Throttle: Avoid pressing the accelerator too hard in a new car to ensure that components like pistons, cylinders, and other important parts increase their load gently. This allows the parts to fully contact, rub, adapt, and settle, improving their ability to adjust to the environment and smoothing out any rough edges on the components. The quality of the break-in process significantly impacts the car's lifespan, safety, and fuel efficiency.
11
2
Share

At What Wind Speed Level Are Highways Closed?

If there is a wind force of 6 to 7 on the Beaufort scale, it is actually not advisable to drive on the highway. Strong crosswinds on the highway can affect the driving stability of the vehicle. Vehicle Stability: The stability of a car at high speeds depends on factors such as chassis tuning and aerodynamics. If the car's shock absorbers are relatively soft, the stability of the car at high speeds will be poor, even if the car itself is heavy, its high-speed stability will still be compromised. Impact of Strong Winds on Vehicles: When driving in windy conditions, vehicles are affected by crosswinds, especially vans or large vehicles, as these types of vehicles are significantly impacted due to their higher center of gravity and larger side surface area. Additionally, lighter vehicles are also very susceptible to such effects. The faster the vehicle's speed, the stronger the impact of the crosswind will be.
14
4
Share

Is it necessary to take a new automatic transmission car on a high-speed run?

It is not necessary to take a new automatic transmission car on a high-speed run. Below are the methods and precautions for running in a new car: Methods for running in a new car: The best way to run in a new car is to drive it under normal working conditions. Moreover, new cars do not have carbon deposits, so many new car owners take the risk of breaking the law and endangering their lives by deliberately "taking a high-speed run," which is not worth the effort. With the development of the automotive industry, many new cars are now designed with usage factors in mind, and manufacturers clearly state that new cars no longer require running in. Precautions for running in a new car: New cars need timely maintenance during the running-in period. Driving a new car requires the owner to familiarize themselves with aspects such as the car's brakes, accelerator, shock absorption, steering force, and gear-shifting logic. Understanding the car's characteristics is very important for safe driving.
19
2
Share

What is the maximum displacement of the Mercedes-Benz GLB?

The maximum displacement of the Mercedes-Benz GLB is 1.3T. Below is an introduction to the relationship between larger displacement and higher speed: 1. Explanation: Acceleration (power performance) and absolute speed are determined by the vehicle's specific power and final drive ratio. A higher specific power indicates better power performance, which means a larger engine pulling a lighter car; a smaller final drive ratio results in a higher top speed, as the gear transmission ratio determines the reduction of the engine's output speed. 2. Displacement: Displacement refers to the exhaust volume, and the cylinder working volume is the volume swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, which depends on the cylinder bore and piston stroke. The engine displacement is the sum of the working volumes of all cylinders, usually expressed in liters (L). Engine displacement is one of the most important structural parameters, as it represents the size of the engine more accurately than the cylinder bore and number of cylinders. Many indicators of the engine are closely related to the displacement.
12
1
Share

How to release the parking brake on a Mercedes-Benz E300?

The parking brake on the Mercedes-Benz E300 is an electronic parking function button. Pressing this button will release the vehicle's parking function. Below is an introduction to related content about Mercedes-Benz: 1. Mercedes-Benz SAM: The control unit, which stands for Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing safety risks. 2. Mercedes-Benz: A German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automobile and brand symbols globally. Mercedes-Benz cars not only boast unparalleled quality but also offer a comprehensive range of models. Currently, the brand mainly produces A-Class cars, C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class cars (SUV off-road vehicles).
12
5
Share

How to Reset the Maintenance Light on the Tiggo 3?

Tiggo 3 maintenance light reset method: 1. Turn off the ignition switch, at this time the instrument panel is in a power-off state; 2. Turn the ignition switch to the ACC position; 3. Press and hold the button on the instrument panel without releasing, then turn the ignition switch to the ON position; 4. Wait for a few seconds, and the maintenance light will reset. The Tiggo 3 is equipped with two engines: one is a 1.5L naturally aspirated engine, and the other is a 1.6L naturally aspirated engine. The 1.5L naturally aspirated engine has a maximum power of 85kW, a maximum torque of 143Nm, a maximum power speed of 6150 rpm, and a maximum torque speed of 4000 rpm. This engine is paired with a 5-speed manual transmission. The 1.6L naturally aspirated engine has a maximum power of 93kW, a maximum torque of 160Nm, a maximum power speed of 6150 rpm, and a maximum torque speed of 3900 rpm. This engine is equipped with DVVT technology and uses an aluminum cylinder head and cast iron cylinder block.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.