How Long Does It Take to Get the Result of Penalty for an Expired Driver's License?

2 Answers
Lulu
07/25/25 1:55pm
It usually takes about 15 days to half a month to get the result of the penalty for an expired driver's license. Driving with an expired license is prohibited: An expired driver's license cannot be used to continue driving on the road. Otherwise, it will be treated as driving without a license. If caught, the vehicle will be impounded, and the driver will face corresponding fines. In severe cases, detention of up to 15 days may be imposed. Insurance companies will not cover claims for an expired license: If you continue to drive with an expired license and are involved in a traffic accident, the insurance company will not provide compensation. All consequences will be borne by the vehicle owner. The renewal of a driver's license can be delayed for up to 3 years. After that, the license will be invalidated.
Was this review help?
12
3
Share
LaRafael
08/11/25 8:55pm
When caught with an expired driver's license, the police will usually issue you a ticket on the spot, providing an immediate initial outcome. The ticket states the fine amount and the violation reason. However, processing the entire procedure takes some time. For example, after paying the fine, it may take three to five days or even a week for the system to update your violation record, depending on the efficiency of the local traffic management system. Don't procrastinate—the ticket typically requires payment within 15 days, and late payments incur additional fees, making the situation more troublesome the longer you wait. After promptly paying the fine via bank or app, remind yourself to renew your license to avoid repeating the mistake. It's advisable to check your license's expiration date annually and set a phone calendar reminder to renew it at the local DMV three months in advance, saving you a lot of hassle. Safe driving is the top priority.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What Causes the Clanking Noise When a Corolla Hybrid Goes Over Speed Bumps?

Causes of clanking noise when a Corolla Hybrid goes over speed bumps: Body noise: This issue is usually due to insufficient body rigidity, causing the vehicle to deform while driving, resulting in friction or shaking between doors and door frames, or friction between steel plates due to welding failures in certain areas. Applying adhesive strips on windows or placing rubber pads in friction-prone areas may alleviate or eliminate the noise, but these are temporary fixes. Some vehicles have significant wind noise, which is related to their design. If no additional items have been added, owners should not attempt to resolve it themselves. Loose body components can also cause noise, which can usually be fixed by tightening screws. Engine compartment noise: Some noise from engine vibration is normal, but certain unusual sounds may indicate potential issues. For example, a sharp belt squealing noise is usually caused by belt slippage; a high-pitched metallic sound during engine operation is often due to damaged bearings in the generator, water pump, or power steering pump; a hissing sound could indicate a blocked exhaust system, vacuum tube leakage, or breakage. If there are abnormal noises inside the engine, these are usually serious issues, and the vehicle should be sent for professional inspection and repair as soon as possible. Tire noise: Tire noise is rhythmic and increases in frequency with speed. A dull "thudding" sound is often due to tire tread deformation, bulging, severe wear, or insufficient pressure; a "ticking" sound may indicate small stones stuck in the tread. If the tire makes a roaring noise accompanied by noticeable body shaking or steering pull, it’s likely a tire blowout—pull over and change the tire immediately.
15
2
Share

Why was the 14th-generation Sylphy discontinued?

Due to the changes of the times, the 14th-generation Sylphy was phased out after the release of newer models. The 2020 Sylphy was officially launched on July 16, 2019, marking a generational update—the 14th-generation Sylphy. The new model adopted the Vmotion-2.0 concept car design language, similar to the all-new Teana, and was equipped with Nissan Intelligent Mobility technology. Additional details are as follows: 1. Exterior: The 14th-generation Sylphy features the latest family design language (Nissan's Vmotion-2.0 flat design language), with a more sporty appearance. The iconic V-shaped grille is further enlarged, paired with sharp headlight clusters on both sides, giving the front fascia a more angular look, breaking away from its traditionally conservative image. 2. Side Profile: The segmented waistline design is quite distinctive, complemented by a new 17-inch double five-spoke wheel design, enhancing the overall sporty feel. In terms of dimensions, the rear features a more intricate taillight design. Configurations include optional sunroof, different headlight styles, front fog lights, and wheel designs. 3. Interior: The 14th-generation Sylphy adopts the latest family-style interior design, maintaining a comfortable and homey ambiance. The floating central touchscreen integrates most functional operations, reducing physical buttons inside the cabin. 4. Powertrain: The 14th-generation Sylphy continues to be powered by a 1.6L naturally aspirated engine, delivering a maximum power of 126 horsepower (93 kW) and a top speed of 190 km/h. It is paired with a CVT transmission and complies with the China VI emission standards.
2
5
Share

Can I continue driving if the ABS sensor of the Tiguan fails?

ABS warning light is on, it is recommended not to continue driving, because the ABS light on means that the vehicle's anti-lock braking system has failed. In case of emergency braking, if the wheels lock up, the vehicle will lose control and skid, making it impossible for the driver to slow down or adjust the vehicle's trajectory, which poses a significant safety hazard. There are various states of the ABS light being on, and the causes and solutions for different states vary. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The sensing part of the ABS speed sensor is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. As a result, the ABS computer cannot determine the speed or the wheel's slip rate, and thus cannot issue appropriate commands to adjust braking. Solution: Clean the dirt on the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections between system lines or poor contact of the ABS relay, leading to system failure. Solution: Check the line connections and reconnect any loose parts. State 2: ABS warning light intermittently lights up and turns off when accelerating. Cause: When multiple vehicle electrical devices are used, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS indicator light turns off; the ABS system power supply voltage is too low, such as poor contact at the terminals or grounding. Solution: Check the battery's specific gravity; inspect the charging system; check the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after the engine starts and only turns off when the engine is turned off. Cause: Poor contact in the ABS hydraulic valve body's grounding circuit; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer failure. Solution: Loosen the grounding screw of the hydraulic valve body, then tighten it again, cleaning the contact surface if necessary; check if the connector gap has increased; replace the ABS or ABS/ASR computer. State 4: ABS warning light turns on during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant difference between the rear and front wheel speeds; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently lights up. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down to the bottom with your fingers, then release the brake pedal to complete the self-setting position; replace the brake light switch.
4
5
Share

What model is the ES6?

es6 is a pure electric seven-seater SUV under the NIO brand. Taking the 2020 NIO ES6 as an example, it is a mid-size SUV with body dimensions of: length 4850mm, width 1965mm, height 1758mm, wheelbase 2900mm, front track 1668mm, rear track 1672mm, curb weight 2200kg, and luggage compartment volume ranging from 584L to 1433L. The 2020 NIO ES6 features a front suspension with double-wishbone independent suspension, rear suspension with multi-link independent suspension, dual-motor four-wheel drive system, and a single-speed electric vehicle transmission.
15
0
Share

What brand of tires does the Malibu use?

The Malibu uses Goodyear tires. Taking the 2018 Malibu as an example, it is a mid-size car with body dimensions of 4855mm in length, 1854mm in width, and 1476mm in height, a wheelbase of 2737mm, and a curb weight of 1520kg. The 2018 Malibu features a front MacPherson independent suspension and a rear multi-link independent suspension, with a front-wheel-drive layout. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 170PS, a maximum torque of 250Nm, and a maximum power of 125kW, paired with a 6-speed automatic transmission.
17
4
Share

Where is the BMW child lock located?

BMW's child lock is located on the rear doors, featuring a toggle switch design, and the child safety seat uses ISOFIX interface. How to use the child lock: To activate the child lock, push the toggle lever (in the direction of the arrow) to complete the locking operation. To deactivate the child lock, push the lever all the way in the opposite direction of the arrow, which will then release the child lock. Purpose of setting the child lock: When the BMW child safety door lock is activated, the door cannot be opened from inside the vehicle and can only be opened from the outside, enhancing the safety of rear passengers during driving.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.