How long does it take to get the license after renewal?

1 Answers
Garrett
07/30/25 9:37am
You can get the license within 60 days after renewal, with a maximum of three months, subject to the receipt. Below are the specific instructions for license renewal: Method: The motor vehicle driver should apply for renewal at the vehicle management office of the motor vehicle driving license issuing place within 90 days before the expiration of the motor vehicle driving license. Required materials: The "Motor Vehicle Driving License Application Form" filled out according to regulations. The original "Motor Vehicle Driver Physical Condition Certificate" issued by a county-level or above medical institution determined by the Municipal Health Bureau. The original and copy of the applicant's identity certificate. (If handled by an agent, the original and copy of the agent's identity certificate are also required. Residents temporarily residing in the city should also submit the residence temporary certificate issued by the public security authority in addition to their ID card). The original motor vehicle driving license. Three photos of the motor vehicle driver.
Was this review help?
17
3
Share
More Forum Discussions

What are the causes of abnormal noises in car sunroofs?

The causes of abnormal noises in car sunroofs are: 1. Aging of glass sealing rubber strips; 2. Debris in the guide rails; 3. Loose internal fastening screws; 4. Insecure fixation; 5. Loose glass buckles. The methods to address sunroof noises include: 1. Wiping the sunroof slide rails with a soft cloth; 2. Applying butter to the tracks; 3. For rubber and plastic components, clean the surface and apply talcum powder for protection; 4. Regularly inspect the sunroof and tighten any loose screws promptly. The functions of a sunroof are: 1. Enhancing the ventilation inside the vehicle; 2. Renewing the air inside the car; 3. Providing an alternative escape route when doors cannot be used in emergencies.
15
1
Share

What to Do When the Battery of an Automatic Transmission Car Is Insufficient?

Automatic transmission car battery insufficient power processing method is: 1. Drive the car with electricity next to the car without electricity, the front of the car should be close to each other; 2. Open the hoods of both cars and take out the charging clips; 3. Find the batteries of the two vehicles, connect the negative clips to the negative terminals of both car batteries, and the positive clips to the positive terminals of both car batteries; 4. Start the car with electricity to charge. Car battery, also called storage battery, is a type of battery that works by converting chemical energy into electrical energy. Types of storage batteries include: alkaline batteries, alkaline zinc-manganese batteries, cadmium-nickel batteries, and nickel-metal hydride batteries.
3
1
Share

Can You Continue Driving When ATF Temperature is Too High?

No. When the temperature is excessively high, the lubrication performance of the internal transmission fluid decreases, which can easily cause burning of the friction plates and pressure plates in the clutch. This ultimately leads to transmission slippage, necessitating transmission repairs. It is recommended to stop the vehicle immediately for inspection. AT generally refers to the transmission. The transmission is a mechanism used to alter the speed and torque from the engine, capable of fixing or changing the gear ratio between the output and input shafts in steps. It is also known as the gearbox. Below are the classifications of transmissions: 1. Stepped Transmission: The stepped transmission is the most widely used type. It employs gear transmission and has several fixed gear ratios. Based on the gear system used, there are two types: fixed-axis transmissions (conventional transmissions) and rotating-axis transmissions (planetary gear transmissions). Passenger cars and light to medium-duty trucks typically have transmissions with 3-5 forward gears and one reverse gear, while heavy-duty trucks use combined transmissions with even more gears. The number of transmission gears refers to the number of forward gears. 2. Continuously Variable Transmission (CVT): A continuously variable transmission is a system that can continuously obtain any gear ratio within the transmission range. It allows for optimal matching between the drivetrain and engine conditions. Common types of CVTs include hydro-mechanical CVTs and metal belt CVTs (VDT-CVT). 3. Integrated Transmission: An integrated transmission refers to a hydro-mechanical transmission composed of a torque converter and a stepped gear transmission. Its gear ratio can vary continuously within several discontinuous ranges between the maximum and minimum values, and it is widely used today.
12
1
Share

What Causes the Squeaking Sound When Turning the Steering Wheel to Full Lock?

The squeaking sound when turning the steering wheel to full lock is caused by: 1. Damaged CV joint bearings; 2. Loose stabilizer links; 3. Excessive pressure from the power steering pump, resulting in abnormal noise. The steering wheel, also known as the helm, consists of a rim, spokes, and hub, with its fine internal splines connecting to the steering shaft. Types of steering wheels include: 1. Single-spoke steering wheel; 2. Dual-spoke steering wheel; 3. Three-spoke steering wheel; 4. Four-spoke steering wheel. Steering wheel materials include: 1. Foam plastic material; 2. Genuine leather steering wheel. The function of the steering wheel is to control the vehicle's direction of travel, manage wheel orientation, enabling the car to move straight or turn.
16
1
Share

How long is the running-in period for the Tayron?

The running-in period for the Tayron is 3,000 kilometers. During this period, avoid full load and minimize sudden braking or rapid acceleration. Taking the 2020 Tayron as an example, it belongs to the mid-size SUV category with the following dimensions: length 4589mm, width 18460mm, height 1660mm, wheelbase 2731mm, fuel tank capacity 60 liters, and trunk capacity 506 liters. The 2020 Tayron is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
7
0
Share

Where is the car flywheel located?

Car flywheel is installed at the rear end of the engine crankshaft. Here is the relevant introduction: 1. Function: Its function is to store engine energy, overcome the resistance of other components, make the crankshaft rotate evenly, and connect the engine and the car transmission through the clutch installed on the flywheel, which is combined with the engine to facilitate engine starting. The flywheel is the driving part of the friction clutch. A flywheel ring gear for starting the engine is embedded on the flywheel rim. The top dead center mark is also engraved on the flywheel to calibrate the ignition timing or fuel injection timing, and adjust the valve clearance. 2. Flywheel introduction: The flywheel is a large-mass cast iron inertia disc, a wheel-shaped energy accumulator with a large operating inertia installed on the rotating shaft of the machine.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.