···
Log in / Register

How long does it take to get a temporary car license plate?

4 Answers
LeCaleb
08/29/25 8:16am

After applying for a temporary license plate online, it usually takes about 5 working days to receive it. Here is some relevant information about temporary license plates: 1. Time limit: The temporary license plate for a new car cannot be used for more than ten days. 2. Classification: One type is for temporary driving within the administrative jurisdiction, with a validity period of no more than 15 days, and the color is blue; the second type is for temporary driving across administrative jurisdictions, with a validity period of no more than 30 days, and the color is yellow. The procedures for applying for both yellow and blue temporary license plates are the same.

Was this review help?
2
0
Share
VanFrank
09/11/25 5:44am

When I bought my new car last week, I was so excited that I got the temporary license plate done right at the 4S dealership, and the whole process took just over half an hour. Generally, if you apply at the place where you buy the car, you can get it the same day, which is quite convenient. If you go to the DMV yourself, you need to bring your ID, vehicle purchase invoice, and compulsory insurance proof in advance. The process can be completed in half a day if it's fast, or within 1-2 working days at most. The validity period of a temporary license plate is very short, about 7 days, which is enough time for you to drive to complete the formal procedures. Online appointments can speed things up, so it's best not to delay, or you might face fines if it expires. The temporary plate is just a transition, so getting it done early saves you trouble.

Was this review help?
15
4
Share
Expand All
MartinAnn
10/25/25 6:33am

Having driven for over 20 years, I always get my temporary license plate on the same day when buying a new car. If processed by the 4S dealership, it's very fast—just bring all required documents and it's done instantly. If you go to the vehicle management office yourself, it might take half an hour with short queues, or at most 1-3 days. The temporary plate is valid for up to 15 days, which is perfect for the transition period. The key is to prepare all necessary documents in advance, such as a copy of your ID card and the car purchase contract, and don't be careless. There's really not much to worry about in terms of timing—handle it properly and you won't face any delays.

Was this review help?
14
0
Share
Expand All
NevaehLynn
12/08/25 6:57am

Too busy with work, I don't have time to wait long. Last time I bought a car, I got the temporary plate directly at the dealership—their efficiency was high. If you handle it yourself, go to the DMV with all the required documents, and it usually gets done within 24 hours. It's valid for about 7 days, so get the official license plate done early.

Was this review help?
10
4
Share
Expand All
More Forum Discussions

What are the reasons for a Haval transmission not shifting up?

In most cases, it is due to automatic transmission failure, such as common transmission slippage, which can lead to this situation. Check the quality of the transmission fluid: If it is brown or burnt, it indicates that the transmission fluid is dirty and may even clog the oil passages, causing abnormal operation of the transmission valve body. Therefore, the first step is to check whether the fluid is in good condition. Caused by stubborn internal dirt and impurities: The automatic transmission cannot shift up. In many cases, the issue is not the internal valve body but rather stubborn internal dirt and impurities. It is necessary to remove the hard-to-handle dirt and impurities from the gearbox. Possibly caused by high temperature: The transmission will start to slip, causing the temperature to rise even higher. If not addressed in time, the transmission may be rendered useless.
6
4
Share

What is the highest level of BMW sedans?

BMW 5 Series is the highest level of BMW sedans. Luxurious Interior and Features: The BMW 5 Series boasts a minimalist yet elegant interior design and premium driving experience, with exceptionally spacious rear seating. The seats are ergonomically designed, comfortably padded, and equipped with ambient lighting. Outstanding Power Performance and Handling: The BMW 5 Series is powered by a 2.0T 184-horsepower L4 engine, delivering a maximum power of 135KW and a peak torque of 290N·m, with a top speed of 230Km/h, ensuring agile and swift performance. Its Sports mode offers extremely responsive throttle and transmission reactions.
11
0
Share

How to Replace Coolant in BMW X3?

BMW X3 coolant replacement procedure is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipelines, with particular attention to the five-way water pipe. Coolant is distributed to different parts of the car through this five-way pipe to perform its function. If there's any coolant leakage in this area, replace the water pipe or reseal the connection as needed. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject water into the reservoir to allow it to circulate through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to facilitate water circulation. Initially, the water draining from the reservoir may appear slightly pinkish. Continue adding clean water until the outflowing water runs clear. Note: Remember to remove the heater hose and drain all water from the heater core. Approximately one hour after draining, add new coolant through the radiator hose. Then, pour another container of coolant into the reservoir until it's nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Top up with more coolant until it reaches the "MAXT" mark on the reservoir.
8
2
Share

What car has four fan-shaped logos?

The logo with four fan-shaped segments belongs to BMW. The difference between BMW and Brilliance BMW: The most significant distinction lies in the fact that 'BMW' refers to imported vehicles, while 'Brilliance BMW' is a joint venture brand established through collaboration between BMW and the domestic automaker Brilliance Auto. Therefore, there are notable differences between the two. BMW has production facilities across various countries globally, with different subsidiaries sourcing identical raw materials that are then transported to BMW manufacturing plants worldwide for production. Consequently, whether it's an imported BMW or a joint venture BMW, both carry the authentic BMW heritage. The difference between BMW and Mercedes-Benz: Firstly, they belong to different brands with distinct founding and developmental histories. Mercedes-Benz's predecessor was an automobile manufacturer, making it a veteran in the automotive industry. In contrast, BMW's origins trace back to aircraft engine production, representing a later entry into the car market. Secondly, their target demographics differ. BMW primarily targets younger affluent individuals, such as heirs and newly wealthy entrepreneurs, who prioritize personal driving experiences and seek the thrill of handling. Thus, BMW places greater emphasis on vehicle dynamics and driving pleasure.
20
0
Share

What are the causes of abnormal noise from the left front wheel of the Teana while driving?

The factors causing abnormal noise from the left front wheel are: damage to the front wheel rolling bearing or aging of the shock absorber upper seat. Rhythmic sharp noise: This may be caused by friction due to insufficient clearance between the brake disc and the brake pad. Check if the front wheel brake pads are too thin, which can cause noise. In such cases, you can visit an auto repair shop to check the thickness of the brake pads. Continuous sharp noise: This may indicate damage to the rolling bearing. Damage to the front wheel rolling bearing can cause abnormal noise, and it is necessary to check if there are any issues with the front wheel rolling bearing. This type of noise is usually more severe at high speeds, and if damaged, the front wheel rolling bearing needs to be replaced. Continuous low-pitched noise: This may indicate a problem with the drive shaft. In this case, it is necessary to replace the shock absorber or the shock absorber upper seat. Also, check the front wheel chassis lower control arm ball joint or rubber pad.
6
4
Share

Where to Install the Anti-Collision Strips on Audi Q5L?

Audi Q5L door anti-collision strips are installed at the areas prone to collisions on the doors, generally at the edge above the door handles. What are anti-collision strips: Anti-collision strips are black adhesive strips attached to the exterior of the vehicle, which can prevent scratches, add lines and dynamism to the car body, and serve as decoration. The functions of anti-collision strips are: To prevent the car body from being scratched or damaged by foreign objects, providing protection. However, since anti-collision strips cover a very small area of the car body, their protective effect is minimal when the side of the car body is impacted or scratched. Most car anti-collision strips are made of rubber or natural rubber and are part of the car's exterior decoration. Their main purpose is to prevent minor scratches and damage to components, and they are usually installed at the corners of the doors and the front and rear bumpers. Body side moldings are components installed on the waist or bumper of the car body, primarily serving to protect the car body from scratches. Most passenger cars are equipped with body side moldings to prevent minor collisions and scratches from damaging the car paint, providing a certain level of protection.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.