···
Log in / Register

How Long Does It Take to Get a C2 Driver's License?

4 Answers
JuliannaFitz
07/30/25 2:04am
Subject 1 takes 2 weeks, Subject 2 including queuing takes 3 months, Subject 3 waiting for exam scheduling takes 2-3 months, and Subject 4 can be applied for directly after passing Subject 3, with 2 weeks of preparation needed to complete the exam. There may be slight variations depending on the city. C2 Driver's License: It is a type of driver's license that only permits the holder to drive small and micro automatic passenger vehicles, as well as light and micro automatic cargo vehicles. Vehicle Types: A C2 license allows driving small automatic transmission cars. The C2 license is one of the more common driver's licenses and only permits driving automatic transmission vehicles with no more than 9 seats and a length not exceeding 6 meters. A driver's license, also known as a driving permit, is a document issued by government transportation authorities to individuals qualified to drive, typically in the form of a card.
Was this review help?
6
0
Share
JuniperFitz
08/15/25 8:02am
It took me almost two months to get my C2 driver's license. I went to the driving school for practice in my spare time, about three or four times a week. I mainly practiced practical skills like reverse parking and hill starts, and also attended theoretical classes for more than ten days. I found the automatic transmission easier since I didn't have to worry about shifting gears. The driving school said it usually takes one to three months on average, depending on how quickly you learn and the exam schedule affecting progress. I practiced more and passed earlier, but a friend of mine failed once and spent an extra half month retraining. After getting the license, I felt more confident driving on the road. I recommend checking the pass rate and training schedule of the driving school when choosing one to avoid unnecessary waiting.
Was this review help?
2
2
Share
Expand All
VanBennett
10/21/25 4:04am
As a cautious learner, it took me nearly three months to obtain my C2 driver's license. Although automatic transmission cars are easier to handle, safety is more important, so I practiced more times to avoid operational mistakes. The theoretical learning phase only took a week, and memorizing traffic rules wasn't difficult. However, the practical training required repeated attention to details, such as being mindful of blind spots during simulated road conditions. Normally, it takes two months to complete, but failing the test or holiday delays can extend the process. I remember the summer being crowded with long waiting times, so I didn't finish until autumn. The key is to communicate more with the instructor and not rush through the basics. Only after obtaining the license can you drive reliably.
Was this review help?
8
1
Share
Expand All
GraceAnn
12/04/25 4:32am
It only took me a little over a month from registration to obtaining my C2 driver's license. The secret was choosing an intensive training driving school, where I practiced driving for half a day five days a week. I quickly passed the theory test by doing practice questions, and focused on practicing curves and parking during the practical sessions. Although the time was short, I ensured efficiency and avoided dragging out the learning process without mastering the skills, which could lead to retakes and waste more time. Generally, learning automatic transmission is less strenuous than manual transmission. One week for theory and two weeks for practical training are usually sufficient, followed by passing the final test in one go. Getting the license early allows you to hit the road sooner, and the time saved can be used for other things.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What Type of Engine Oil is Best for the First Car Maintenance?

Every vehicle comes with a manufacturer-recommended standard original engine oil. If not specifically specified, using the original engine oil is sufficient for both the first maintenance and subsequent regular services. Types of engine oil: Mineral Oil: Mineral oil is directly refined from crude oil without the addition of other additives. It is suitable for low-displacement, non-turbocharged vehicles or those with infrequent usage, typically around 5,000 kilometers in half a year. If you don't drive often, mineral oil offers the best economic value. Semi-Synthetic Oil: Semi-synthetic oil is a blended product made by mixing mineral oil and full synthetic oil through a compounding process. It offers the best cost-performance ratio and is a great choice for drivers who frequently use their cars. Its oil change interval is around 7,500 kilometers, making it suitable for most vehicle models. Full Synthetic Oil: Full synthetic oil is more expensive compared to the previous two types but offers superior performance. Whether in terms of stability, lubrication, low-temperature performance, or cleanliness, it far outperforms mineral oil and semi-synthetic oil. Its replacement interval exceeds 10,000 kilometers, and many car owners experience noticeable performance improvements after switching to full synthetic oil.
9
5
Share

Why does the screen go black when connecting Apple CarPlay to the car?

The main reasons for the black screen when connecting Apple CarPlay to the car are: In-vehicle computer crash: As modern cars have numerous electronic components, especially with the continuous updates of car connectivity systems, many vehicles' multimedia systems have become increasingly complex, leading to more frequent occurrences of dashboard screen malfunctions. You can try turning off and restarting the vehicle and its onboard computer to see if the screen display recovers. If the problem persists after repeated attempts, schedule a visit to a 4S shop for module inspection, software refresh, or repair. Connector detachment: Since many wiring connections use direct plug-in connectors, they may become detached or loose due to bumpy road conditions or original installation quality issues, resulting in dashboard screen failure. This can only be resolved by visiting a 4S shop or repair shop to disassemble the rear of the screen and securely reconnect the connectors.
10
1
Share

Why does the steering wheel shake when the car reaches 100 km/h?

In most cases, steering wheel vibration at 100 km/h is caused by wheel dynamic balance issues. The solution is to add counterweights to the wheels while they are in motion to correct the balance at various edge points - this process is called dynamic balancing. Other possible causes include shock absorber failure, frame deformation, or excessive clearance between the driving and driven gears of the final drive. It is recommended that owners regularly perform dynamic balance checks on their wheels. The dynamic balancing procedure is as follows: 1. Remove the logo in the center of the hub, install the dynamic balancer for measurement, and input the data. 2. Measure the rim width and input the data. 3. According to the computer-calculated data, add appropriate dynamic balance weights to both the inner and outer sides of the rim. When the re-test meets the standard, the process is complete.
18
5
Share

What does 3 years or 100,000 kilometers mean?

A three-year or 100,000-kilometer warranty means that if any non-human-induced issues arise with the vehicle within three years or 100,000 kilometers, the manufacturer will provide free repairs or replacements. After exceeding either the time or mileage limit, the vehicle will no longer be covered by the warranty. Warranty coverage: The scope and duration of the vehicle warranty do not apply uniformly to all components, meaning not all parts of the car will have the same warranty period. The benefits of car maintenance: 1. Keeps the vehicle in optimal technical condition, improving its operational readiness. 2. With proper usage, reduces the likelihood of breakdowns caused by mechanical failures, thereby enhancing transportation efficiency. 3. Prevents mechanical accidents and eliminates potential driving hazards. 4. Reduces fuel and lubricant consumption as well as tire wear. 5. Effectively controls vehicle noise and environmental pollution.
14
2
Share

At What Water Level Does the Engine Risk Taking in Water?

When the water level reaches above 20 centimeters, there is a risk of water entering the engine. For ordinary sedans, when the water level exceeds 20 centimeters (for SUVs with higher ground clearance, this threshold increases to 30 centimeters), the engine is at risk of water ingress. Water can enter the engine primarily through two pathways: Low intake pipe entrance: Due to the low position of the engine's intake pipe entrance, water can be sucked into the engine when the vehicle is driving through flooded areas. Exhaust outlet below the waterline: If the exhaust pipe outlet is below the waterline, water can be drawn into the engine through the exhaust. Below is relevant information: After water enters the engine, it will inevitably stall: Since water entering the cylinders lacks lubricating properties, blindly restarting the engine after stalling may cause severe damage, such as cylinder scoring, leading to engine failure. The correct procedure is to push the vehicle to a higher, dry area, contact the insurance company, and then tow the car to a repair shop for inspection. Check the condition of all vehicle system fluids: This is to prevent issues like foaming or contamination of the engine oil, which can degrade its lubricating properties. Additionally, water may carry sand particles, causing excessive engine wear. Prompt cleaning and replacement are necessary. After inspection, clean the electrical connections in the engine compartment to prevent corrosion or sand residue caused by trapped moisture. Key areas to clean include: The fuse box, sensor connectors, and areas where water may accumulate in the vehicle body. After cleaning these components, conduct a road test, maintaining moderate to low speeds, and listen carefully for any abnormal engine noises. If significant noise is detected, inspect the engine bearings and rotating components again to ensure they are not damaged due to excessive wear.
11
1
Share

What is the best way to clean spark plugs?

Spark plugs are best cleaned using carburetor cleaner. Carburetor cleaner is specifically designed for removing oil, grease, and carbon deposits, effectively cleaning carbon buildup without damaging the spark plugs. Spark plugs can also be cleaned with white vinegar, carburetor cleaner, or toilet cleaner. The cleaning methods for spark plugs are as follows: 1. White vinegar: Place the spark plug in a glass container, pour white vinegar until it covers the spark plug, soak for 2 to 3 hours, then scrub clean with a stiff toothbrush and let it air dry. 2. Carburetor cleaner: Place the spark plug head-down in a glass bottle, spray carburetor cleaner into the bottle until the spark plug is submerged, cover the bottle, wait for about half an hour, then remove it, scrub clean with a toothbrush, and let it air dry or use a hair dryer to dry it. 3. Toilet cleaner: Soak the spark plug's ignition electrode directly in pure toilet cleaner, place it in a ventilated environment for 10 minutes, remove it when the bubbles gradually decrease, rinse with white vinegar, and let it air dry.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.