How long does it take to fully charge the Chery Ant?

How to Deal with Water in the Transmission?

The methods to handle water in the transmission are as follows: 1. If the transmission has only been slightly contaminated with clean water, do not continue driving the vehicle or start the engine. 2. Generally, water settles at the bottom of the transmission fluid. Therefore, it is necessary to open the bottom of the transmission to drain the water and fluid, then refill with new transmission fluid. It is also advisable to replace components such as gaskets, oil seals, and friction plates to extend the service life. If the water ingress is severe and affects functionality, the vehicle must be taken to a repair shop for professional servicing. Generally, water entering the transmission is caused by the following two scenarios: 1. If water rises above two-thirds of the wheel height, the probability of water entering the transmission is around 80% to 90%. If the water level reaches the dashboard, the transmission is 100% likely to have water ingress. 2. Water splashing into the transmission during oncoming traffic. If there is excessive standing water on the road, the splashes hitting the vehicle body can also lead to water entering the transmission. When water enters the transmission, the performance of the transmission fluid is severely affected. Not only is the lubrication performance compromised, but the power transmission capability of the fluid also decreases. This can cause the clutch plates to slip, leading to increased fluid temperature. This may result in the generation of steam or even boiling of the oil-water mixture. These viscous substances can accumulate in the valve body, causing blockages and affecting the transmission control system.

17

3

Share

What is the correct method for cleaning a car's air conditioning system?

Correct steps for cleaning a car's air conditioning system: 1. First, locate the air circulation inlet connected to the vents. This is usually found on the right side at the base of the windshield or beneath a central cover panel. 2. Set the air conditioning to maximum fan speed and switch to external circulation mode. 3. Open the inlet cover using your hand or a screwdriver. 4. Attach the nozzle provided with the cleaning solution and spray into the inlet. Spray again after a few seconds in intervals rather than continuously. The blower will draw the cleaner into the ducts. Change the circulation mode to ensure all ducts are cleaned. 5. After 15 minutes, turn off the air conditioning. The cleaner will drain out with the condensate water. When no more condensate flows out, turn on the heater to evaporate any remaining cleaner inside the system, and leave the windows open for ventilation. 6. The car's air conditioning cleaning is now complete.

11

3

Share

How to Adjust the Seats in the Tayron?

Volkswagen Tayron seat adjustments are located on the left side of the seat cushion. The seat offers three adjustment functions: seat position, backrest, and lumbar support. The rear seats of the Volkswagen Tayron can be folded down using the lever on the side of the trunk. Below are the methods for adjusting the seats in the Volkswagen Tayron: 1. Press the lumbar support adjustment button to adjust the height of the lumbar support. 2. Lift or press down the seat cushion adjustment switch to raise or lower the seat cushion. Moving the switch forward or backward adjusts the seat's forward or backward position. 3. Adjust the backrest tilt angle by pulling it forward or backward—forward for tilting forward and backward for tilting backward.

11

0

Share

What Causes Engine Shaking When Starting the Car?

Engine shaking when starting the car can be attributed to the following reasons: 1. Worn or Loose Engine Mounts: Engine mounts are rubber blocks placed between the engine and the car frame. Their purpose is to reduce vibrations and absorb shocks during engine operation, thereby securing the engine in place. If the engine mounts become worn or loose, the engine's shaking will become noticeably abnormal. 2. Engine Misfire: An engine misfire occurs when one or more cylinders fail to function properly. Common symptoms include intermittent exhaust flow, severe shaking of the exhaust pipe, noticeable engine vibration, and sometimes accompanied by a sputtering sound. This can be caused by a faulty ignition coil. 3. Carbon Buildup: Carbon deposits can accumulate in various parts of the engine, including the cylinders, throttle body, spark plugs, and intake system. These deposits are related to the engine's power output. Excessive carbon buildup inside the engine can reduce ignition energy and decrease air intake efficiency, ultimately leading to symptoms such as engine shaking and poor acceleration.

17

2

Share

How many people can the Toyota Alphard seat?

Toyota Alphard is a seven-seater vehicle that can accommodate 7 people. Below is relevant information about the Toyota Alphard: 1. The driver's seat features an 8-way power-adjustable electric seat with 3 memory functions. The second-row seats are equipped with 4-way power-adjustable Ottoman first-class seats, featuring three-way headrests, independent armrests, cup holders in the armrests, a multifunctional folding table, and a maximum reclining angle of 78 degrees. The seats can slide up to 450mm forward and backward and come with height-adjustable footrests. 2. It is powered by a 3.5L V6 2GR-FE engine, delivering a maximum power of 202kw and a maximum torque of 340Nm, paired with a 6-speed automatic transmission with manual shift mode.

8

1

Share

How to Clean Car Seat Belts?

Here are the methods to clean car seat belts: 1. Using foam cleaner: Spray the cleaner evenly on the contaminated seat belt, wait for a moment, then scrub with a soft-bristle brush like a shoe brush. After scrubbing, wipe the belt with a towel to remove all foam residue. Finally, wipe the belt once more with a damp towel. 2. Using neutral soap solution: Extend the seat belt to the buckle and secure it to prevent retraction. Then, use a soft-bristle brush dipped in soapy water to scrub the stained areas. After thorough scrubbing, rinse with clean water. Do not release the belt immediately; instead, wait until the surface is completely dry before retracting it to avoid affecting its safety and lifespan. 3. Visiting a car detailing shop: Higher-end car detailing services offer interior steam cleaning, which can disinfect and remove stains from the car interior. 4. Using toothpaste and a toothbrush: For small oil stains or particularly dirty spots, prepare a spray bottle, dip a toothbrush in toothpaste, spray the stained area, and scrub repeatedly until the stain fades. Then, rinse with clean water, let it dry, and retract the belt.

14

0

Share

How long does it take to fully charge the Chery Ant?

How to Deal with Water in the Transmission?

What is the correct method for cleaning a car's air conditioning system?

How to Adjust the Seats in the Tayron?

What Causes Engine Shaking When Starting the Car?

How many people can the Toyota Alphard seat?

How to Clean Car Seat Belts?

How to Turn on Both Front and Rear Fog Lights Simultaneously?

Cold Air or Warm Air for Windshield Fogging?

What Causes the Sizzling Sound During Cold Start of a Car?

Why does the Volkswagen Magotan engine shake slightly when just started?