How long does it take to fully charge a Geely Boyue battery directly?

4 Answers
DelDominic
07/29/25 9:18am
After the Geely Boyue battery runs out of power, it takes 20 hours to fully charge it directly. It is recommended to purchase a dedicated charger for charging to avoid affecting the normal use of the battery. Constant current and limited voltage: For example, when charging a 12V20AH battery pack, the current value is generally 3A, and the limited voltage value is 14.8V. Constant voltage and limited current: When the current drops to the jump current value, proceed to the next step. The constant voltage is 14.8V with a limited current of 3A until the current drops to 0.55A and the light jumps. Trickle float charging: Also known as maintenance charging, the float charging voltage is 13.8V with a limited current of 0.55A. This stage generally lasts for 2~3 hours before power is cut off.
Was this review help?
20
4
Share
LaJesse
08/12/25 9:19am
I've been driving a Geely Boyue for three years, and the battery is a 12V 60Ah one. The direct charging time depends on the specific situation. If you use a 15A charger to charge a completely dead battery, it will take about 6 hours; if it's a 10A charger, it will take more than 8 hours. Be careful not to use a charger with too low power—if the current is below 5A, it might take a whole day to fully charge. I recommend keeping the hood open for ventilation while charging and unplugging the charger as soon as the green light turns on. Once, it took me 10 hours to fully charge because the battery was old and its internal resistance had increased. The safest option is to buy a smart charger with an automatic stop function.
Was this review help?
15
3
Share
Expand All
VonBarrett
08/12/25 9:21am
I'm in the habit of regularly checking my car's battery. The Geely Boyue's battery capacity is generally 60 ampere-hours. The charging duration depends on several key factors: if the battery is only half-charged, using a 10A charger for about 5 hours should suffice; if it's completely dead, it may require 10-12 hours of uninterrupted charging. The choice of charger is crucial—ordinary household chargers have low power and efficiency, while professional repair chargers with pulse function can shorten charging time by 2-3 hours. Remember to clean the battery terminals before connecting to avoid poor contact affecting efficiency.
Was this review help?
18
0
Share
Expand All
LaMelanie
10/06/25 4:57am
As someone who often helps friends with car repairs, special attention must be paid to safety when charging the battery of SUVs like the Boyue. The charging current for regular household use should be controlled between 6-10A, and it needs at least 8 hours of charging when completely depleted. In fact, the most reliable method is to drive for more than half an hour to charge via the alternator, which is twice as fast as external charging. If external charging is necessary, first check the battery fluid level and add distilled water if the electrolyte is insufficient. During charging, check the battery temperature every 2 hours by touching it; stop charging if it gets hot to avoid battery swelling.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What Causes a Sedan to Lack Power and Fail to Accelerate When Climbing a Slope?

The reasons why a sedan lacks power and fails to accelerate when climbing a slope are: 1. Excessive carbon buildup in the vehicle; 2. Poor fuel quality; 3. Blocked intake or exhaust system; 4. Worn-out spark plugs; 5. Cylinder misfire; 6. Insufficient tire pressure; 7. Insufficient engine power; 8. Problems with the combustion chamber, ignition system, or valves; 9. Dirty fuel filter, damaged fuel pump, or clogged catalytic converter. Solutions to address a sedan's lack of power and failure to accelerate when climbing a slope include: 1. Cleaning carbon deposits; 2. Using high-quality gasoline; 3. Replacing spark plugs; 4. Regularly checking tire pressure; 5. Periodically cleaning the fuel filter; 6. Inspecting the fuel pump.
6
2
Share

Will the Prado meet China VI emission standards?

The Prado will not meet China VI emission standards due to the total emission restrictions under China VI, which are not suitable for large-displacement SUVs. Taking the 2010 Prado as an example, its body dimensions are: length 4820mm, width 1885mm, height 1845mm, wheelbase 2790mm, minimum ground clearance 220mm, and fuel tank capacity 87L. The 2010 Prado is equipped with a 2.7L naturally aspirated engine, with a maximum horsepower of 163ps and a maximum power of 120kw, paired with a 5-speed manual transmission. It uses a double-wishbone independent front suspension and a four-link solid axle non-independent rear suspension.
2
5
Share

How to Properly Set Up a Dash Cam?

To correctly set up a dash cam: 1. Assemble the dash cam with its mounting bracket; 2. Use the suction cup on the bracket to attach it to the front windshield near the rearview mirror; 3. Connect one end of the power cable (USB port) to the dash cam and the other end to the cigarette lighter; 4. After installation, turn on the dash cam and set the parameters to Simplified Chinese; 5. Configure the time, video resolution, and audio recording. A dash cam is a device that records video and audio information during vehicle operation, capturing the entire driving process to provide evidence in case of traffic accidents.
19
4
Share

What are the reasons for the ABS warning light to come on?

ABS warning light comes on due to a fault in the anti-lock braking system. The possible reasons for the ABS warning light to come on include: 1. Faulty wheel speed sensor; 2. Faulty wheel speed sensor wiring. The methods to reset the ABS warning light are: 1. Visit a repair shop to have it cleared with a computer; 2. Locate the car battery, disconnect the negative terminal, and reconnect it after a few minutes. ABS stands for Anti-lock Braking System, and its functions are: 1. Automatically controlling the braking force during braking to effectively keep the wheels in a rotating state; 2. Improving the stability of the car during braking and the braking performance on poor road conditions.
9
1
Share

What is the function of the 'off' button in a car?

The 'off' button in a car refers to the switch that turns off the vehicle stability control system. The working principle of the vehicle stability control system is as follows: when the vehicle is making a quick turn, dodging, or avoiding a suddenly appearing car or animal, if the vehicle slides outward due to understeer or crosses the centerline of the road or even spins in place due to oversteer, the system uses a computer to control the engine output and apply brakes to any wheel, thereby eliminating understeer or oversteer and improving the dynamic stability of the vehicle. When the car is powered on, the vehicle stability system is enabled by default. Press and hold the 'off' button to turn off the vehicle stability system.
3
4
Share

How to Defog a Toyota Corolla?

Toyota Corolla's defogging steps are: 1. Turn on the car's air conditioning; 2. Adjust the air conditioning to the warm air setting; 3. Turn on the car's external circulation; 4. Press the front and rear defogging buttons, and use warm air to complete the defogging. Taking the Toyota Corolla 2021 model as an example, its body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm. The Toyota Corolla 2021 model is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116ps and a maximum power of 85kw, matched with a continuously variable transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.