How Long Does It Take to Fully Charge a BYD Dolphin Using a Slow Charger?

1 Answers
VonAutumn
07/30/25 8:21am
When charging a BYD Dolphin using a slow charger, it takes approximately 10 hours to fully charge from around 45% battery level. If the battery level is below 45%, the charging time will be longer. Below is an introduction to charging the BYD Dolphin: Charging Precautions: After prolonged exposure to high temperatures, the BYD Dolphin should be moved to a shaded area and allowed to cool down before charging. This practice helps extend the battery's lifespan. Extended exposure to sunlight raises the temperature of the power box and battery, and immediate charging can accelerate the aging and damage of internal wiring. Charging Methods: The BYD Dolphin supports both slow and fast charging, with both charging ports conveniently located together. Users can choose their preferred charging method based on their needs.
Was this review help?
15
5
Share
More Forum Discussions

Can You Use Spray Paint on a Car?

Spray paint can be used on a car, but its adhesion is much weaker compared to baked paint. Additionally, there are differences in the paint finish—spray paint not only has a certain color deviation from the original factory paint but also lacks the glossiness of baked paint. Methods to remove spray paint: 1. Carburetor cleaner: Spray the carburetor cleaner directly onto the area with spray paint, then wipe it off with a towel. 2. Banana oil: Apply banana oil to the painted area and wash it off for effective removal. 3. Olive oil: Apply some olive oil to the spray-painted area, gently rub it to let it soak in, and then wash it off with soap after a few minutes.
19
1
Share

Engine Flooded: Repair or Replace?

Minor damage can be repaired, while severe cases require replacement. Methods to check if the engine is flooded: Check the engine oil. Inspect various pipes for water ingress. Examine the spark plugs. Look for carbon deposits on the engine cylinder walls. Post-flooding treatment: If the vehicle only passed through water once and the engine was not started afterward, this generally won't cause irreversible damage to the engine. The main task is to remove internal water accumulation, but the extent of cleaning depends on the situation. Often, the intake pipe and intake manifold are removed, and compressed air is used to dry out the water inside. If your vehicle stalled in water, most mechanics will recommend authorizing them to disassemble the engine.
14
4
Share

What to Do When the Audi A6L's Water Temperature Reaches 130 Degrees?

Insufficient coolant in the cooling system causes the engine to overheat. Park the vehicle and wait for the engine to cool down before adding coolant. A loose or broken water pump or fan belt leads to engine overheating. Visit a repair shop to replace the relevant components. The radiator guard mesh or radiator core ventilation ducts are clogged with debris, resulting in poor heat dissipation and causing the engine to overheat. Replace the radiator guard. Insufficient engine oil or substandard oil quality causes the engine to overheat. Simply replace it with high-quality oil.
17
1
Share

How to Reset the Tire Pressure Warning Light on Bora Legend?

Check each of the four tires and their pressure on the Bora Legend to ensure the tire pressure is within the normal range. Press and hold the tire pressure "Reset" button on the vehicle. The "Reset" button is located in front of the gear shift lever, or there may be a button labeled SET on the right side of the gear shift lever. Insert the car key into the Bora Legend and start the vehicle. Press and hold the tire pressure reset button on the Bora Legend, then briefly press the clock adjustment button. The tire pressure will then enter the reset mode, and the tire pressure warning light will be turned off.
6
4
Share

What is a standard two-wheeled motorcycle?

Standard two-wheeled motorcycle refers to a motorcycle equipped with two wheels. Below are the correct braking methods for motorcycles: High-speed braking method: When braking at high speed, the braking force on the front wheel must be greater than that on the rear wheel. The braking force on the front wheel at high speed must not cause the front wheel to lock up. Uphill braking method: When braking uphill, the braking force on the front wheel can be appropriately increased. When braking downhill, the braking force on the rear wheel can be appropriately increased. Emergency braking: The braking force should be slightly less than the force that would cause the wheels to lock up. On slippery roads, the rear wheel should be braked before the front wheel.
4
0
Share

What is the belt model for Harley 750?

Harley 750 belt model is street750. Advantages of belt drive: Due to its softer material, it operates more smoothly with less noise, especially when shifting gears, providing noticeably higher comfort. Additionally, it has a long service life and saves the hassle of adding lubricant and maintenance procedures. Disadvantages of belt drive: Due to lower friction, the transmission efficiency is reduced, especially under high torque, which can lead to belt slippage. This type of drive is only suitable for smooth street riding, as uneven roads can damage the belt, potentially causing it to break mid-ride. Moreover, once damaged, the repair cost is twice that of a chain drive.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.