How Long Does It Take to Complete from Subject 1 to Subject 4?

3 Answers
ValerieAnn
07/25/25 4:35am
From registration to obtaining a driver's license, it takes at least about one month. According to regulations, after passing the Subject 1 exam, you must wait at least 10 days before you can schedule the Subject 2 exam, and 20 days after Subject 1 before scheduling the Subject 3 exam. The exact duration depends on the actual learning and examination process, which involves several steps: 1. Registration: Enroll at a driving school, which marks the beginning of the process. 2. Learning: Normally, completing the required study hours takes about 10-15 days per subject. If there are no study hour requirements, the time is not fixed. 3. Scheduling: In many places, there is a high demand for driving tests, so securing an exam slot should also be factored into the timeline. 4. Examination: For Subjects 1, 2, 3, and 4, passing each on the first attempt saves time. If not, you will need to retake the exam.
Was this review help?
11
3
Share
MacElliott
08/11/25 12:24pm
I've been really into getting my driver's license, and I just passed all the tests last month. It took me around 35 days at the fastest. This is because regulations require a 10-day practice period between the second and third tests, so you can't take them back-to-back. Right after signing up, I immediately started studying the theory questions, using the 'Driving Test Treasure' app to focus my learning, and passed the first test in a week. Then, I practiced on the driving range, spending three hours a day on simulations, and passed the second test in about ten days. During the 10-day gap, I focused more on road test content, and the third test went smoothly. Finally, I spent two days reinforcing the theory and directly passed the fourth test. The whole process relies on the driving school's flexible scheduling and available slots not holding you back. It's recommended to complete the medical check-up and registration materials beforehand to save waiting time. In short, haste makes waste, but a tight schedule can really speed things up and prevent last-minute mistakes.
Was this review help?
17
0
Share
Expand All
LaZoey
09/27/25 4:05am
As an experienced driver helping friends with their driving tests, I found that the fastest completion time is capped at 45 days. The key is seamless progression from subject one to subject four: finish the theory test quickly after registration, aiming for two weeks; then don't dawdle on subject two, practice turning and reversing with high intensity; don't waste the mandatory 10-day interval, use it for simulated road tests. With a well-arranged driving school, subjects three and four can be compressed into four or five working days. However, many delays occur in reality, like long queues at test centers or incomplete documents, causing a week's delay. It's best to choose driving schools that promise quick test scheduling when registering, and be diligent to book tests early to avoid unnecessary waiting. This approach ensures both stability and speed, making learning efficient and safer for driving.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

Where is the windshield washer switch for the Haval F7?

The windshield washer switch for the Haval F7 is located on the right side of the steering wheel. The function of the windshield wiper: The windshield wiper is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Classification of windshield wipers: According to the working method, windshield wipers can be classified into traditional intermittent wipers and rain-sensing wipers. The former is a more common type, which can be adjusted by the driver according to the rain intensity; while the rain-sensing type is mostly used in mid-to-high-end models. To ensure the normal use of the wiper, it is best to replace the wiper regularly.
17
1
Share

What are the precautions for car maintenance in autumn?

There are several aspects to pay attention to for car maintenance in autumn: 1. Engine compartment maintenance: Check the engine oil, brake fluid, and coolant in the engine compartment to ensure they are sufficient, not deteriorated, and within the replacement cycle. These fluids are like the lifeblood of your car, and they must be replaced when due to ensure smooth circulation. 2. Brake system maintenance: Brake system care should not be neglected at any time, not just in autumn. Regularly check if the braking performance weakens or pulls to one side, and whether the brake pedal's resistance changes. If necessary, clean the entire brake system's piping. 3. Heater lines and fan maintenance: As the weather cools in autumn, frost may appear at lower temperatures. Pay special attention to whether the defrost vents under the windshield are functioning properly and providing sufficient heat. Address any issues promptly. 4. Air conditioning maintenance: Inspect the air conditioning system to ensure the pipes are intact and check if the cabin air filter needs replacement. 5. Battery maintenance: The battery terminals are the most problematic areas in autumn. If green oxide deposits are found during inspection, rinse them off with boiling water immediately. These deposits can lead to insufficient generator output, causing the battery to discharge and, in severe cases, result in battery failure or difficulty starting the car. 6. Interior maintenance: Due to high temperatures and frequent rain in summer, carpets, floor mats, and other hidden areas inside the car can harbor bacteria. It is essential to perform a thorough interior disinfection and cleaning.
18
5
Share

What is the weight of the Nissan Murano body?

Nissan Murano body weighs approximately 1902 kg. Nissan Murano body safety: The body structure has high safety, constructed with 590MPa and above high-strength steel, accounting for up to 1/3 of the body. Key areas use 980MPa high-strength submarine-grade steel, significantly enhancing the vehicle's impact resistance and support. Nissan Murano exterior design: The body is large, with a stylish and smooth appearance that is very attractive. The car adopts a sports car-inspired design, achieving the lowest drag coefficient while being a genuine SUV model. The headlight design and L-shaped taillights have high recognition, and the nighttime lighting effect is very sharp. The roof also features the currently popular floating roof design, and the oversized wheel design enhances its sporty feel.
16
4
Share

Why does the battery cable of Audi A6 get hot?

Audi A6 battery cable gets hot because there is always current flowing through it, which generates heat. Function of car battery: The function of a car battery is to drive transmission, provide current for in-car electrical appliances and lights, and supply power to the starter and alternator to ensure the vehicle starts and runs normally. Maintenance of car battery: It is best not to excessively use the battery to keep it in a constant discharge state. Do not add high-current electrical equipment that would overload the battery, leading to a shortened service life. Avoid heavy impacts on the battery's positive and negative terminals, as this can cause the battery electrolyte to leak, corroding the battery and cables, resulting in the inability to store electricity.
13
5
Share

How far can you drive with a damaged tire?

Normally, a regular damaged tire can still be driven for about thirty kilometers. If it's a run-flat tire, you can continue driving at low speed for approximately 100 kilometers. For other types of tires, it's recommended not to drive too far, as it depends on the severity of the tire blowout. However, regardless of the type of tire, in case of a blowout, it's essential to go to the nearest repair shop for inspection or tire repair to avoid potential traffic accidents. Tires are circular elastic rubber products installed on various vehicles or mechanical equipment, typically mounted on metal rims. They support the vehicle body, cushion external impacts, ensure proper contact with the ground, and maintain the vehicle's driving performance. Tires are frequently used under complex and demanding conditions, enduring various deformations, loads, forces, and high-low temperature effects during operation. Therefore, they need to possess high installation performance, traction performance, and cushioning performance. When determining that a front tire has blown out, first firmly grip the steering wheel and remember not to make sudden adjustments to the direction. Wait until the direction stabilizes, then gradually apply the brakes to reduce the vehicle's speed. Next, gently turn the steering wheel to pull over, and place a triangular warning sign approximately 100-200 meters behind the vehicle. If it's a rear tire blowout, the vehicle's deviation effect will be less pronounced. In this case, you should ease off the accelerator, gently apply the brakes, control the direction, and slowly pull the vehicle to the side. Then, place a triangular warning sign about 100-200 meters behind the vehicle.
3
1
Share

What are the applications of plastics in automobiles?

Plastics are used in automobiles for components such as engine covers, cooling fans, automobile water chambers, radiator grilles, and more. The use of plastics in automobiles not only reduces the cost of parts processing, assembly, and maintenance but also makes vehicles lighter, more energy-efficient, and environmentally friendly. Automotive components that use plastics: engine covers, cooling fans, automobile water chambers, radiator grilles, bumpers, filters, wheel covers, automobile carpets, rearview mirror brackets, door handles, fenders, lamp brackets, steering wheels, various interior parts, and instrument panels. Classification of plastics used in automobiles: Nylon materials: Nylon is mainly used in automobile engines and surrounding components. The main varieties include GFPA6, GFPA66, flame-retardant reinforced PA6, and other products. Polyester materials: In the automotive manufacturing sector, PBT is widely used to produce automobile parts such as bumpers, carburetor assemblies, fenders, spoilers, spark plug terminal boards, fuel supply system parts, instrument panels, automobile igniters, accelerators, and clutch pedals. Polyoxymethylene materials: The automotive industry is the largest potential market for polyoxymethylene materials. Polyoxymethylene offers advantages such as light weight, high hardness, wear resistance, creep resistance, and chemical corrosion resistance. Polycarbonate materials: Due to their excellent heat resistance, impact resistance, rigidity, and good processing fluidity, modified PC is mainly used in automotive parts such as interior and exterior trim components, instrument panel surrounding parts, antifreeze panels, door handles, louvers, brackets, steering column covers, decorative panels, and lamp components.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.