···
Log in / Register

How long does it take to check vehicle records after running a red light violation?

4 Answers
OAllie
07/29/25 7:44am

After running a red light, the violation record can usually be checked within 3 to 7 days, with a maximum of around 13 days. However, some cities now offer an "electronic police instant notification" service, where you may receive an SMS notification within 5-10 minutes after being captured. However, this notification does not confirm the violation; it only serves as a capture alert. The final determination of whether a violation occurred will take 3-7 days. If a violation is confirmed, you will receive another SMS notification. For violations captured by surveillance cameras, vehicle owners generally do not receive an immediate violation notification via SMS. There is usually a delay, and the duration may vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. The information is then compiled and forwarded to the relevant traffic police personnel for verification. Once the violation is confirmed, the system will automatically retrieve the vehicle owner's phone number based on the license plate information. The violation details will then be sent to the owner via SMS. After receiving the violation SMS, the vehicle owner must settle all outstanding violations within one month before the vehicle's annual inspection. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received within 15 days, it is likely that no violation was recorded. Methods for traffic violation inquiries: Traffic violation inquiries refer to checking motor vehicle violations of traffic regulations through online platforms, inquiry terminals, etc. Methods for vehicle violation inquiries include website inquiries, phone inquiries, SMS inquiries, mobile app inquiries, and offline terminal inquiries. Website inquiry: You can search for "vehicle violation inquiry" and enter your vehicle information to check. Phone inquiry: You can call the local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location where the violation occurred or where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by traffic police, they must be processed at the violation location. SMS inquiry: Open your phone's SMS composition interface; enter "WZ" followed by your license plate number and color in the message body; enter 1062650001 as the recipient and click send. Mobile app inquiry: Open the Traffic Management 12123 app, log in, and click on "Vehicle Violations" to access the inquiry interface. The displayed results will show recent unprocessed violation records. Offline terminal inquiry: Visit the local traffic management office and use the self-service inquiry machine to enter your license plate number and check recent violation records.

Was this review help?
20
2
Share
JasonLynn
08/13/25 2:07am

Last time I got caught speeding, I specifically asked my traffic police friend about this. Running a red light violation can usually be checked on the 12123 APP within 3 to 5 days, but it depends on the speed of equipment uploading. Once I ran a red light in the city and received a text message on the third day; violations on highways take longer to process due to cross-regional data sharing. Note that efficiency varies by region - tourist cities may take up to a week to update. Remember to handle the violation within 15 days of receiving the notice, otherwise late fees will apply. It's good practice to check your violation records weekly to avoid missing deadlines.

Was this review help?
14
4
Share
Expand All
JackFitz
10/05/25 2:05am

Having driven for ride-hailing services these years, I'm quite familiar with traffic violation inquiries. After a red-light violation is captured by cameras, the footage first undergoes manual review before being entered into the system. The record can typically be queried within 24 hours at the earliest, or up to 7 days at the latest. Last week in our driver group chat, someone who ran a red light in the morning found the record at the traffic police station window that same afternoon. However, mobile apps usually sync half a day slower, so I recommend checking directly on the official traffic management website for the most accurate results. Note that violations on local roads tend to appear faster, while cross-city violations might take two extra days. Remember to handle them promptly to avoid affecting next year's insurance premiums.

Was this review help?
11
1
Share
Expand All
Todd
11/18/25 3:36am

Just learned this lesson the hard way last month. Ran a red light on Friday evening, and got the violation notification on 12123 by Monday noon. The traffic police explained that after being captured by electronic surveillance, the license plate info gets verified before upload. For regular urban intersections, it usually takes within 48 hours to show up, but during traffic restriction days or foggy/rainy weather, recognition efficiency might delay. Recommended to start checking from the 3rd day post-violation – checking too early may cause unnecessary anxiety. Remember to bring your vehicle license and ID when handling violations, though many places now offer online processing too.

Was this review help?
1
2
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of a Xiali in liters?

The fuel tank capacity of a Xiali is 37 liters, as officially announced. Owners who have purchased a Xiali can also check this information on the vehicle's configuration sheet. The recommended fuel grade for Xiali is 92 octane, with a fuel consumption of 6.1L per 100 kilometers. A full tank can cover a distance of approximately 607 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
15
1
Share

What Causes the Loud Noise from the Car Fan?

The loud noise from the car fan is mainly caused by three reasons. Below is a detailed explanation of these three causes: 1. Exhaust fan blades: The exhaust fan, driven by an electric motor, rotates the blades to drive airflow, facilitating air exchange between indoor and outdoor environments as part of an air conditioning appliance. When the blades of the exhaust fan inside the air conditioner become deformed, it can result in a louder noise, and it is recommended to replace the exhaust fan. 2. Exhaust fan motor: The purpose of exhaust is to remove stale indoor air and regulate temperature, humidity, and comfort. If the motor of the exhaust fan inside the air conditioner is damaged, it can lead to a louder noise, and it is recommended to replace the exhaust fan. 3. Excessive debris: If there is a significant amount of debris inside the air conditioner, it is advisable to clean the air conditioner.
15
4
Share

Where to Place the ETC Tag?

The ETC installation position is generally in the upper middle part of the front windshield horizontally, while for large vehicles such as trucks and buses, the installation position is in the lower middle part. The suitable installation position should be at a height of no less than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof films, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the vehicle owner must provide original and photocopies of their valid ID card and vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the proxy; original vehicle registration certificate; the vehicle for which ETC is to be applied. Below are the precautions for ETC installation: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have a large tilt angle of the windshield, resulting in a smaller driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it randomly once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. Once the electronic tag is installed on the windshield, the anti-removal lever will be pressed in. If removed randomly, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Points to note when using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll deduction for the wrong vehicle; the recognition speed for ETC lanes is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information and toll deduction failure; when using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
1
0
Share

How much is the fine and how many points are deducted for speeding 80% over the limit?

Speeding 80% over the limit: According to the "Scoring Standards for Road Traffic Violations," driving 50% or more over the speed limit results in 12 penalty points and a fine. Below is extended information about vehicle speed: 1. Concept of Vehicle Speed: Vehicle speed generally refers to the speed of a moving car. It indicates the distance a car travels per unit of time, commonly measured in kilometers per hour or meters per second. 2. Spot Speed: Spot speed is the instantaneous speed of a car passing a specific point on the road. The arithmetic mean of a set of spot speed observations is the average spot speed. Spot speed is widely used in traffic engineering as a basis for setting road design speeds, installing traffic control facilities, determining traffic management methods, implementing traffic improvement measures and their economic analysis, exploring speed trends of various vehicle types, and evaluating the effectiveness of road traffic facilities, traffic management, and improvement measures.
10
2
Share

How to Use the Handbrake, Lift or Lower?

When starting, the handbrake needs to be lowered, and when parking, the handbrake needs to be pulled up. Additional Information: 1. Remember to Engage the Handbrake When Parking: Some drivers forget to engage the handbrake after parking, resulting in the car moving without a driver and causing accidents. Especially on slopes, ensure the car is in gear and the handbrake is engaged, waiting for the vehicle to stabilize before exiting. 2. Handbrake is Often Used in Conjunction with Neutral Gear: Even during brief stops like at red lights, engaging the handbrake can prevent the car from rolling on uneven roads and give your right foot a short break. Use nearby stationary objects as a reference to check for any movement. 3. Lower the Handbrake When Starting: When starting the car, make sure to lower the handbrake. Remember to press the button and ensure it is fully lowered. Many beginners forget to release the handbrake, which can cause damage to it.
1
3
Share

What is the difference between polo-sport and polo?

polo-sport and polo have the following differences: polo-sport is a clothing brand under the U.S. Polo Association; polo is a compact car under Volkswagen. Additional information about the Volkswagen polo is as follows: 1. Body dimensions: length 3970mm, width 1682mm, height 1462mm, wheelbase 2470mm. 2. Fuel consumption: 6.5L-8.8L. 3. Engine type: turbocharged (TSI), naturally aspirated. 4. Braking system: disc brakes (front wheels), drum brakes (rear wheels).
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.