How long does it take to check for running a red light?

1 Answers
Lynn
07/30/25 1:44am
Running a red light usually takes 3 to 7 days to be checked, and generally no more than 13 working days. The traffic police team collects, organizes, and reviews the data, and then enters and transmits it, uploading it online within a week. If the violation is captured by a camera, i.e., a non-on-site violation, it may take more than 15 days to check. The specific time varies in different regions and is not fixed, typically taking about a week. If you are concerned about a potential violation, you can check online for relevant information a week after the suspected violation. For greater certainty, you can check again after 15 days.
Was this review help?
3
2
Share
More Forum Discussions

Will a loose fuel tank cap trigger a warning in a China VI vehicle?

Generally, the malfunction indicator light will not illuminate due to a loose fuel tank cap; it only activates in response to internal engine faults. Fuel tank design principles: The fuel tank must have sufficient capacity. On one hand, it should meet cooling requirements as much as possible. On the other hand, it should be able to contain all the working fluid in the system when the hydraulic system is inactive, while maintaining an appropriate fluid level during operation. Functions of the fuel tank: In a hydraulic system, the fuel tank not only stores oil but also serves to dissipate heat, separate air bubbles from the oil, and settle impurities. It is equipped with various accessories such as coolers, heaters, air filters, and liquid level gauges.
6
2
Share

Can I Use Someone Else's Driver's License to Buy a Car?

Yes, but it must be with the other person's consent; otherwise, it cannot be processed, and there may be suspicion of identity fraud. Introduction to Driver's License: A driver's license, officially known as a motor vehicle driving license or simply "driver's license," is a legal document required for individuals to operate motor vehicles. Driver's License Categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, P.
8
2
Share

Is U-turn allowed at intersections without traffic lights?

At intersections with traffic lights, U-turns must be performed where there is a designated U-turn marking line. If no U-turn marking is present, U-turns are not permitted. Scenarios where U-turns are allowed include: Presence of U-turn signal or sign: When there is a U-turn traffic signal at the intersection, a U-turn can be made when the U-turn signal is green. If there is a U-turn sign or marking on the lane allowing U-turns, drivers may execute a U-turn after ensuring safety for themselves and others. No U-turn marking but left turns permitted (no prohibition signs): Vehicles may make U-turns at intersections where left turns are allowed and no U-turn prohibition signs or markings exist. Note that vehicles must follow the left-turn signal without disrupting normal traffic flow. For intersections with left-turn waiting zones, drivers can enter the waiting area when the straight signal is green and proceed with the U-turn when the left-turn signal turns green. U-turns permitted at dashed lines: Both white and yellow dashed lines allow U-turns. For double yellow lines (one solid, one dashed), check if your side has the dashed line—if so, U-turns are permitted when safe; if solid, U-turns are prohibited. At intersections with such markings, U-turns can be made on the dashed-line side without crossing the stop line ahead. U-turns allowed at yellow grid lines: While stopping is prohibited in yellow grid areas, U-turns are permitted if there is no central barrier, provided normal traffic is yielded to. U-turns permitted on the dashed side of green belts: When the front of a green belt has a dashed line, vehicles on that side may U-turn there. If the green belt has a solid line, vehicles must obey traffic signals, cross the pedestrian crossing before U-turning, and must not U-turn over solid lines or pedestrian crossings.
2
0
Share

Are Tourist Vehicles Considered Commercial Vehicles?

Tourist vehicles refer to tour buses operated by transportation companies, which can be chartered and are classified as commercial vehicles owned by private entities. Introduction to Tourist Coaches: A tourist coach (touring coach) is a type of bus specifically designed and equipped for tourism purposes. The layout of these vehicles ensures passenger comfort and does not accommodate standing passengers. Simply put, it is a small passenger vehicle with no more than 17 seats. In China, due to their shape, they are commonly referred to as "bread vans." Tourist coaches are highly maneuverable and offer superior ride comfort. Common Issues with Tourist Coaches: For example, consider an 8-meter rear-engine coach equipped with a domestically produced four-cylinder turbocharged, electronically cooled diesel engine. Most domestically produced coaches exceeding this length typically use six-cylinder engines. While similar issues may arise, the lifespan of certain components and the timing and symptoms of faults can differ.
15
4
Share

Why does the handbrake light stay on after releasing it?

The reasons why the handbrake light stays on after releasing it are as follows: Brake system malfunction: If the dashboard light remains on after releasing the handbrake, it indicates a fault in the brake system. If the light stays on continuously, it is usually caused by insufficient brake fluid or excessive wear of the brake pads. It is recommended to first check whether the brake fluid is sufficient. If the brake fluid is low, simply top it up. Excessive brake pad wear: Excessive wear of the brake pads can also cause this issue. You can go to a professional repair shop to replace the brake pads. If there is no fault in the brake system, the problem may lie with the handbrake switch. It is advisable to visit a professional 4S shop for repairs, as the car's braking system is not a trivial matter.
20
1
Share

What Causes Body Vibration When a New Car is in P Gear?

The reasons for body vibration when a new car is in P gear are as follows: Increased Engine Load and Reduced Power: For automatic transmission models, slight vibration when shifting gears is a normal phenomenon, which is caused by increased engine load and reduced power. Abnormal Engine Idle Operation: If the vibration is more noticeable, it indicates abnormal engine idle operation. It is necessary to inspect the aspects that may cause abnormal engine idling. If the fault light is on, locate the faulty part according to the fault code. If the fault light is normal, check whether the air filter is excessively clogged with dust, then check for any cylinder misfires, and further inspect whether the high-voltage ignition system and fuel injection system of the misfiring cylinder are functioning abnormally.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.