How long does it take to check a traffic violation for driving during restricted hours?

2 Answers
DiSamuel
07/24/25 7:55pm
Generally, it takes 3 to 7 days to check a traffic violation after it occurs, with a maximum delay of no more than 13 working days. The traffic police team needs to collect, organize, and review the data, and then enter and transmit it before it is uploaded online within a week. If the violation is captured by a camera (non-on-site violation), it may take more than 15 days to check. Note: The specific time varies in different regions and there is no fixed period. Usually, it takes about a week. If you are worried about having committed a violation, you can check online for relevant information a week after you think the violation occurred. If you want to be more certain, check again after 15 days.
Was this review help?
6
2
Share
SanLeo
08/11/25 10:55am
In my over ten years of driving, the timing of getting caught for violating traffic restrictions has been quite worrisome. Generally, the camera can capture the violation within half an hour at the earliest after being caught, but it might take half a day or a full day for the system to log the record. In big cities, the efficiency is higher, and you can check the record on the APP within 24 hours; in smaller places or if there's a delay, it might take two or three days. I've seen friends checking on the Traffic Management 12123 app, where real-time updates are quite convenient. I recommend always confirming the day's traffic restrictions before driving to avoid regretting fines. If you do violate the rules, check the records early to avoid late fees. In short, technology has sped up, but being careful is still the key.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What's the matter with the ESC system failure of Geely Vision X6?

Geely Vision X6-ESC system failure reasons: starting system failure, ignition system failure. The following details the reasons: Starting system failure: Starting system failure causes the engine to fail to rotate or rotate too slowly: insufficient battery charge, loose or severely oxidized battery terminal clamps; blown main circuit fuse; ignition switch failure; starter failure; open circuit in the starting line or poor contact of the line connector. Ignition system failure: Poor working condition of the ignition coil, resulting in weak or no high-voltage spark; ignition device failure; incorrect ignition timing.
11
2
Share

What is the fuel consumption per kilometer for the Discovery 3?

The Discovery 3 has a fuel consumption of 17.31L/100km. Therefore, the fuel consumption per kilometer is 0.1731L. Here are some methods to reduce fuel consumption: Maintain normal tire pressure levels: If the tire pressure is insufficient, rolling resistance will significantly increase. According to tests, if the tire pressure is 2psi (pressure unit: pounds per square foot) below the specified value, fuel consumption will increase by 1%. Repair faults promptly: Abnormalities in the engine ignition system also have a significant impact on fuel consumption. Issues such as inaccurate ignition timing, leaking high-voltage wires, and spark plug carbon deposits causing weak ignition can all reduce engine combustion efficiency and increase fuel consumption.
4
5
Share

Does the new Buick GL8 have a particulate filter?

The new Buick GL8 has a total of 16 models, all equipped with particulate filters. The entire lineup uses a 2.0T turbocharged engine that meets the China VI emission standards. Except for a very few models, almost all China VI-compliant vehicles are equipped with particulate filters. After the China VI standards were released, automakers found it almost impossible to meet the standards without changing the design direction, R&D investment, or performance. Therefore, most China VI-compliant models are equipped with particulate filters. To check if a vehicle has a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, you can carefully review the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. Check the label on the oil cap. If the oil cap clearly states 0W-20 grade oil, it indicates the vehicle is equipped with a particulate filter. Look behind the three-way catalytic converter on the exhaust pipe to see if there is an additional cylindrical section. If present, that is the particulate filter.
6
4
Share

What are the consequences of using 92-octane gasoline in the new Touareg?

Using 92-octane gasoline in a car designed for 95-octane fuel once or twice is not a big issue, but prolonged use can lead to insufficient cylinder pressure to meet the combustion requirements of the air-fuel mixture, increasing the likelihood of engine knocking. This can manifest as weak engine power output and higher fuel consumption. Differences between 92-octane and 95-octane gasoline: The main difference between these two types of gasoline lies in the content of n-heptane and isooctane. The octane rating (92 or 95) indicates the fuel's anti-knock properties. The higher the octane number, the greater the isooctane content, which means better anti-knock performance. What car owners should do: Carefully read the vehicle's manual to understand the engine's compression ratio and follow the recommended fuel standards provided in the manual.
2
0
Share

Is Prado also known as the 'Badao'?

Prado is also known as the 'Badao'. When Prado first entered the Chinese market, it was named 'Badao' as its Chinese name. Introduction to the Prado: The Prado is the latest model in Toyota's Land Cruiser series, featuring excellent power performance and meeting the Euro III emission standards. Its advanced engine provides strong output power and torque, paired with a highly robust frame and reinforced suspension system, making even the roughest journeys comfortable and smooth. Origin of the Prado: The Prado is an improved version of the Land Cruiser 70 and 90 series. In 1996, the '90 Prado', evolved from the '70 series' 'passenger and cargo vehicle', began its journey.
17
4
Share

Is it a big deal if the Audi Q7's lift mode is not turned on?

Audi Q7's lift mode is not a big deal if forgotten to turn on. The lift mode is mainly used to protect the car's air suspension. It should be turned on during vehicle maintenance or when the vehicle needs to be lifted. Introduction to air suspension: A high-quality SUV should have the comfort of a sedan while also maintaining the off-road performance of an SUV. The air suspension system is the best choice to achieve this goal. Based on different road conditions and signals from distance sensors, the vehicle's computer determines changes in the body height and controls the air compressor and exhaust valves to automatically compress or extend the springs, thereby reducing or increasing the ground clearance of the chassis to enhance high-speed stability or off-road capability. Main components of air suspension: The air suspension system includes air springs, shock absorbers, guide mechanisms, and a body height control system.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.