How long does it take to charge the Ora Black Cat?

2 Answers
LeonardoDella
07/24/25 6:04am
Ora Black Cat has two charging modes: one is fast charging mode, which takes 0.67 hours to fully charge; the other is slow charging mode, which takes 10 hours to fully charge. More details about Ora Black Cat are as follows: 1. The charging port of Ora Black Cat is hidden behind the front logo. To charge, simply press the cover to open the charging port. 2. In fast charging mode, it takes 40 minutes to charge from 30% to 80%. The maximum power of fast charging is 25kw, and the maximum power of slow charging is 3.2kw. When purchasing the vehicle, the 4S store will provide a charger with the car, which can be used at home. The rated voltage of the charger is 220V. 3. This car is equipped with a ternary lithium battery pack produced by CATL. The maximum power of the motor is 35kw, and the maximum torque is 125 Nm. The total battery capacity is 32.85kW. The low-end version of the car has a maximum range of 310 kilometers, while the high-end version has a maximum range of 351 kilometers.
Was this review help?
7
2
Share
StEzra
08/11/25 1:51am
I often help my friends take care of their electric vehicles. The charging time for the Ora Black Cat depends on the type of charger. With fast DC charging, it can reach 80% in just half an hour, which is great when you're in a hurry. For slow AC charging, a standard home charger takes about 6 to 8 hours to fully charge, so I usually plug it in at night and it's ready by morning. It's also important to pay attention to battery temperature and state of charge—for example, charging is faster when the battery is low, and it might be slower in cold winter conditions. This car has a relatively small battery capacity, offering around 200 kilometers of range, so a single charge is usually enough for several days of daily driving. I recommend regularly checking the charging cable for wear and tear to avoid poor contact, which can extend charging time—safety is the top priority.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

What are the advantages of front-wheel drive vehicles?

Advantages of front-engine, front-wheel drive (FF): Simple operating mechanism, good engine cooling conditions; large interior space, easy to arrange; the frame does not need to make room for the rear drive axle, which can reduce the height of the car body; eliminates the long transmission shaft, reduces the overall weight of the vehicle, shortens the power transmission distance, and reduces power transmission losses. Most family cars on the market use front-wheel drive, with only some high-end models using rear-wheel drive. Nowadays, the vast majority of cars adopt the front-engine, front-wheel drive (FF) layout, where the engine is placed at the front of the car and the front wheels are used as the driving wheels. This is because front-wheel drive vehicles do not require a transmission shaft, rear drive shaft, or rear gearbox. The transmission and differential are assembled in a single housing, with fewer and more concentrated components. Lower cost and higher efficiency: When designing and producing cars, manufacturers first consider the cost. Compared to rear-wheel drive, front-wheel drive is less expensive in both design and production. Front-wheel drive vehicles do not require a transmission shaft, rear drive shaft, or rear gearbox. The transmission system differs from rear-wheel drive, with the transmission and differential assembled in a single housing, featuring fewer and more concentrated components. Due to the direct power transmission, losses are reduced, resulting in higher operational efficiency. Reduced weight: For the same displacement and power, the lighter the car, the easier it is to accelerate, the shorter the braking distance, and the more fuel-efficient it is. Front-wheel drive vehicles have fewer and simpler mechanical components compared to rear-wheel drive vehicles, thus significantly reducing weight. Additionally, because the weight of the engine and drive axle is loaded onto the front wheels, which are the driving wheels, this helps increase the vehicle's traction, which is very advantageous on slippery roads. Increased interior space: This can be considered one of the biggest advantages of front-wheel drive over rear-wheel drive. Front-wheel drive vehicles do not have a transmission shaft, so there is no need to reserve space for rear-drive equipment on the floor as in rear-wheel drive vehicles. This allows for more flexibility in space utilization. Furthermore, front-wheel drive vehicles do not have a rear differential, significantly increasing the trunk space.
11
5
Share

How long can the renewal of a driver's license be delayed after it expires?

The renewal of a driver's license can be delayed for up to one year after it expires. The time regulations for renewing a driver's license are as follows: If the expiration is less than one year, it can be renewed normally; if the expiration is between one and three years, the license will be canceled, but it can be renewed by passing the subject one exam; if the expiration exceeds three years, the license will become invalid and cannot be renewed. The methods for renewing a driver's license are as follows: The motor vehicle driver should bring the required materials to the vehicle management office where the driver's license was issued to apply for renewal. The vehicle management office will process the renewal within one working day after the review is approved. Go to the "Police-Medical-Post" service point at the postal business hall to handle the renewal. It only takes half an hour from registration and physical examination to the production of the new license. Currently, only a few cities have opened this service, such as Hangzhou. Materials required for renewal: Bring two copies of ID card, two 1-inch color photos without hats, the original ID card, the original driver's license, and a physical examination certificate from a county-level or above hospital (free physical examination is also available at the vehicle management office).
14
4
Share

Can Yellow License Plate Vehicles Drive on Highways?

Whether a vehicle can drive on highways is determined by its speed and type, not by its license plate. Yellow license plate vehicles include large trucks, two-wheeled vehicles, three-wheeled motorcycles, large buses, and vehicles used for agricultural purposes. Among yellow license plate vehicles, large trucks and buses are certainly allowed on highways, while other low-speed vehicles are not. Relevant regulations are as follows: According to the 'Road Traffic Safety Law of the People's Republic of China': Article 67: Pedestrians, non-motorized vehicles, tractors, wheeled special-purpose motor vehicles, articulated buses, full trailers, and other motor vehicles with a maximum design speed of less than 70 kilometers per hour are not allowed to enter highways. The maximum speed indicated by highway speed limit signs must not exceed 120 kilometers per hour. According to the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China': Article 78: Highways shall indicate the driving speed of lanes. The maximum speed must not exceed 120 kilometers per hour, and the minimum speed must not be less than 60 kilometers per hour. On highways, the maximum speed of small passenger cars must not exceed 120 kilometers per hour, other motor vehicles must not exceed 100 kilometers per hour, and motorcycles must not exceed 80 kilometers per hour.
10
1
Share

Can a 150ml displacement motorcycle go on the highway?

Yes, it can. According to regulations, motorcycles must have a displacement greater than 125ml to be allowed on highways, and a 150ml displacement motorcycle meets this requirement. Motorcycles are also classified as motor vehicles and can access highways under certain conditions. Additionally, based on Article 78 of the "Road Traffic Safety Law of the People's Republic of China" and its implementation regulations regarding motorcycle highway access in various regions, motorcycles must meet the following conditions to operate on highways: Highways must have three or more lanes, and motorcycles can only use the outermost lane; The driving speed of motorcycles on highways must not be less than 60 km/h and must not exceed 80 km/h; Motorcycle riders must have all necessary licenses, including a motorcycle-compatible driver's license, proper motorcycle registration, and compulsory insurance coverage. Important considerations for motorcycles on highways include: toll fees are charged according to the standard for small passenger vehicles with fewer than 7 seats, except during national holidays when tolls are waived; in case of vehicle malfunction, hazard lights should be activated, the vehicle should be parked in the emergency lane to await assistance, and warning signs should be placed at the parking location; exercise caution when overtaking, always use turn signals, and carefully observe before overtaking after signaling.
5
5
Share

What engine does the Dongfeng Fengguang ix5 have?

The Fengguang ix5 is equipped with two turbocharged direct injection engines, the SFG15T and HD15. The 1.5T engine delivers a maximum power of 110kW and a peak torque of 220Nm, while the 1.8L engine produces a maximum power of 102kW and a peak torque of 187Nm. The Fengguang ix5 engine is manufactured in China. The Fengguang IX5 engine is independently developed by Dongfeng Fengguang. For daily maintenance of the Fengguang ix5 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and keep the oil level moderate; When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing the oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. When the amount is small, it remains suspended in the oil; when the amount is large, it precipitates from the oil, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
6
3
Share

What causes the engine warning light to illuminate in the Malibu XL?

There are primarily 7 reasons for the engine warning light to illuminate: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and oil specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor combustion of air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate. Issues like spark plug failure, ignition coil malfunction, fuel pump failure, or clogged fuel lines can all cause poor combustion. Turbocharging problems: The intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Air intake issues may lead to engine pipe blockages, potentially causing the warning light to illuminate. A dirty air filter that hasn't been regularly cleaned can cause intake problems. Exhaust system issues: Exhaust faults can also trigger the engine warning light. Common causes include rear oxygen sensor failure, catalytic converter problems, or exhaust camshaft and bearing failures. The catalytic converter is most frequently affected by factors like leaded gasoline, lead/silicon-containing lubricant additives, physical damage, or fuel system malfunctions. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there's a mismatch between the anti-theft controller and engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine is operating normally. If there's noticeable shaking, black smoke, or other abnormalities, avoid restarting the engine. Particularly important - never restart if the light is red. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, briefly press the start button or turn the key halfway to the ON position (without depressing the clutch). The vehicle will perform a self-diagnostic check - observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center immediately. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.