How long does it take from Xiaopeng P7 vehicle allocation completion to delivery?

1 Answers
SanSamantha
07/29/25 5:15pm
It takes about a week for delivery. The following are the advantages of Xiaopeng P7: 1. Sci-fi appearance: Xiaopeng P7 adopts interstellar design elements. The LED light strip running through the front of the car has a futuristic feel and high recognition. The design of the hood and bumper also highlights some curved design elements, making it more fashionable and avant-garde compared to competitors. At the same time, the side lines are very smooth, and the fastback design at the rear highlights the coupe attributes. The blackened wheels also enhance the sporty atmosphere of Xiaopeng P7. 2. Strong performance: In terms of performance, pure electric vehicles have a natural advantage in acceleration compared to fuel vehicles. The rear-wheel-drive long-range model of Xiaopeng P7 is equipped with a permanent magnet/synchronous single motor and adopts a rear-mounted layout. 3. Intelligent human-computer interaction: Currently, Xiaopeng P7 can basically realize the demand of freeing fingers. Operations on the screen that require manual clicking can be replaced by voice. For example, when the instruction to wake up the intelligent assistant is issued, the required menu will appear on the screen. When further operation is needed, only the corresponding operation words are required, without the need for additional wake-up words and execution words. First of all, it solves the pain point of "tediousness", not to mention, the most important thing is that it is very safe when operating the screen during driving.
Was this review help?
15
4
Share
More Forum Discussions

What is the abbreviation for Inner Mongolia license plates?

Inner Mongolia's license plate abbreviation is Meng. The license plate codes for various regions in Inner Mongolia are: Meng A for Hohhot, Meng B for Baotou, Meng C for Wuhai, Meng D for Chifeng, Meng E for Hulunbuir League, Meng F for Xing'an League, Meng G for Xilingol League, Meng H for Ulanqab League, Meng J for Ih Ju League, Meng K for Bayannur League, Meng L for Alxa League, Meng M for Alxa League. Here is some relevant information about Inner Mongolia: 1. Area: Inner Mongolia covers a total area of 1.183 million square kilometers. 2. Location: It is situated between 37°24′N to 53°23′N latitude and 97°12′E to 126°04′E longitude.
3
3
Share

How long is the Accord's body?

The length, width, and height of the Accord are 4915*1845*1470mm, with a wheelbase of 2775mm. Below is an introduction about the Accord:1. The Honda Accord is a mid-size car launched by GAC Honda, with exterior and interior designs that perfectly align with Chinese consumers' aesthetic preferences for automobiles.2. The car's configuration and power have been upgraded, with the most notable change being the chrome trim on the front grille. The bold chrome trim decoration seems to be a trend. The car's body length is close to five meters, offering superior space performance and a certain advantage.3. The interior of the car also features a brand-new design, with a more three-dimensional center console. The craftsmanship and materials maintain the original high standard, and the extensive use of soft materials further enhances the car's grade, meeting consumers' aesthetic expectations for automobiles.
2
4
Share

What is the Volkswagen Tiguan?

TIGUAN is a compact SUV under Shanghai Volkswagen, with its Chinese brand name being Tiguan. Below is a relevant introduction to the Volkswagen Tiguan: 1. Dimensions: The vehicle's length, width, and height are 4712mm, 1839mm, and 1673mm respectively, with a wheelbase of 2791mm. 2. Powertrain: The Tiguan is equipped with three engines in total, which are a 1.4-liter turbocharged engine, a 1.8-liter turbocharged engine, and a 2.0-liter turbocharged engine. The maximum power outputs are 110 kW (150 hp), 125 kW (170 hp), and 147 kW (200 hp) respectively.
18
3
Share

Why Can't Car Windows Be Fully Rolled Down?

There are several reasons why car windows cannot be fully rolled down: 1. Safety: Preventing windows from fully descending helps protect passengers to a certain extent. 2. Compromise in vehicle design: Due to rear door design constraints where the door's rear section isn't completely straight (often aligned with rear wheels), fully lowering rear windows would cause contact with wheels. This structural limitation prevents complete window retraction into rear doors. 3. Comfort: Partial window retention effectively reduces sunlight exposure inside the cabin, enhancing passenger comfort.
7
2
Share

What are the body dimensions of the Audi A6L?

The length, width, and height dimensions of the Audi A6L are 5038mm/1886mm/1475mm, which are official data. The length of the Audi A6L refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The turbocharged engine of the Audi A6L has a maximum power of 165kW and a maximum torque of 350 Nm. The maximum power speed of this engine is 5000 to 6000 rpm, and the maximum torque speed is 1600 to 4500 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. This engine is paired with a 7-speed wet dual-clutch transmission (DCT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
20
5
Share

Where are the positive and negative terminals of the Audi A4 battery located?

Audi A4 battery positive and negative terminals: First, open the trunk, lift the floor panel, and remove the plastic cover to see the symbols marked with positive and negative signs (+ and --), which are the battery terminals of the Audi A4. It is essential to distinguish between the positive and negative wires to avoid incorrect connections that may cause damage. Here are several methods to distinguish the positive and negative terminals: 1. You can differentiate them based on the thickness of the battery terminal wires—most thick wires are positive, and thin wires are negative. 2. You can use two test leads connected to the battery terminals to distinguish the positive and negative terminals by voltage. 3. The color of the terminal can also indicate polarity—brown terminals are positive, while slate gray terminals are negative. 4. Generally, the terminal facing the manufacturer's logo on the battery case is positive, and the opposite side is negative.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.