···
Log in / Register

How long does it take for Hangzhou electronic surveillance to detect traffic violations?

1 Answers
HarperAnn
07/24/25 1:28pm

Generally, violations captured by electronic surveillance can be checked online within 3 to 7 working days. Considering that law enforcement agencies may not update the website on weekends, violations can usually be checked within 10 days after the incident. "Electronic surveillance" is also known as "electronic police" and is the common name for the "Intelligent Traffic Violation Monitoring and Recording Management System." Here is some related information about electronic surveillance: 1. Electronic surveillance uses various technologies such as vehicle detection, photoelectric imaging, automatic control, network communication, and computer systems to monitor violations such as running red lights, driving in the wrong direction, speeding, crossing lines, and illegal parking. It captures images and information of violations for subsequent processing. 2. Electronic surveillance uses induction lines to sense the pressure from vehicles on the road. The signals are collected by sensors and sent to the central processor, where they are temporarily stored in a register (this data is valid for one red light cycle). 3. If two pulse signals are generated simultaneously within the same time interval (during a red light cycle), it is considered "valid." Simply put, if a car's front wheels cross the line during a red light but the rear wheels do not, only one pulse is generated. If there are not two consecutive pulses, no photo is taken.

Was this review help?
3
2
Share
More Forum Discussions

The Function of Installing a Shark Fin on a Car

The shark fin on a car serves as the vehicle's antenna, enhancing signal reception. If the car is equipped with wireless transmission devices such as a radio or car phone, the signal can become very weak when driving in mountainous areas. Installing a shark fin can significantly improve signal reception inside the car. In addition to boosting signal strength, the shark fin on a car has the following functions: 1. It can discharge static electricity from the car body. Static electricity is very common in cars, especially during dry seasons like winter, where excessive static electricity can easily build up. If static electricity remains on the car for a long time, it can not only cause discomfort when opening the door but also pose potential safety hazards, such as when refueling at a gas station. 2. It can intercept and transmit radio waves. Besides intercepting these radio waves, the shark fin antenna can also transmit them to various devices inside the car that require different types of radio waves. 3. It has an aerodynamic effect. When a vehicle is traveling at high speeds, it encounters air resistance, which increases with speed. The shark fin can reduce and overcome the impact of air resistance on the vehicle. Although most vehicles are equipped with specialized spoiler devices, the shark fin still provides some aerodynamic benefits.
14
0
Share

How to Solve Water Leakage in Lavida Car?

Lavida car water leakage solution is: 1. First completely remove the accumulated water in the car; 2. Clean and dry the items inside the car; 3. Disinfect and thoroughly clean. When water enters the car, the first step is to identify the source of the leakage. Generally, water leakage issues can be divided into: 1. External water leakage, where water enters the car mainly through the door sealing strips, improperly closed windows, window weatherstrips, or guide channels; 2. Internal air conditioning drainage entering the car, where air conditioning drainage failure is mainly caused by blocked drainage outlets, preventing water from being discharged outside and overflowing into the car through gaps in the evaporator box. The Lavida (LAVIDA) is Shanghai Volkswagen's first independently developed A-segment car, which not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements of the era.
19
1
Share

What letter represents neutral gear?

Automatic transmission cars have a neutral gear, represented by the letter N. N (Neutral) is the neutral position, which can be used when starting or towing the vehicle. When waiting at a signal or in traffic, the gear selector is often kept in the D (Drive) position while the brake is pressed. If the stop is brief, this is acceptable, but for longer stops, it is best to shift into N (Neutral) and engage the parking brake. Below is more related information: Automatic transmissions have the following gear positions: 1. P (Park): Represents the parking gear. When parking the vehicle, the gear should be placed in P, including when turning off the engine or idling for extended periods. 2. R (Reverse): Represents the reverse gear. When reversing, the gear should be placed in R. 3. N (Neutral): Represents neutral gear, which is the same as the neutral in a manual transmission. It can be used for short stops. 4. D (Drive): Represents the drive gear. When in this position, the vehicle moves forward, and the transmission automatically shifts between gears 1 and the highest gear based on the vehicle's speed and throttle input. 5. S (Sport): Represents sport mode. When in this position, the transmission delays shifting, keeping the gear at higher RPMs for longer to increase vehicle power, though this consumes more fuel.
9
4
Share

What brand is Mazda's transmission?

Mazda's transmission is independently developed by Mazda, utilizing Skyactiv technology. It is a 6-speed automatic transmission with paddle shifters, featuring a flat torque converter and multi-plate lock-up clutch to expand the lock-up range. Mazda is a Japanese multinational automaker listed on the Tokyo Stock Exchange (TYO), with models such as the Mazda6, Mazda8, and Mazda3. Taking the Mazda3 as an example: it comes in two body styles - a 5-door hatchback and a 4-door sedan, equipped with advanced safety features like the HBC intelligent lighting control system, AFS adaptive front lighting, HLA hill launch assist, ESS emergency stop signal, RVM rear vehicle monitoring, and LDWS lane departure warning system, which are consistent across the Mazda family.
18
0
Share

What Components Make Up a Car Suspension?

Suspension structures consist of elastic elements, guiding mechanisms, and shock absorbers, with some configurations also including buffer blocks and anti-roll bars. Elastic elements come in various forms such as leaf springs, air springs, coil springs, and torsion bars. Modern car suspensions predominantly utilize coil springs and torsion bars, while certain premium vehicles employ air springs. Below is additional information about suspensions: 1. The suspension system refers to the entire support system composed of springs and shock absorbers between the vehicle body and tires. Its intended functions are to support the vehicle body and enhance ride comfort. Different suspension setups provide distinct driving experiences. Though seemingly simple in appearance, suspension systems integrate multiple force interactions, determining a vehicle's stability, comfort, and safety, making them one of the most crucial components in modern automobiles. 2. Suspension is the general term for all force-transmitting connection devices between a vehicle's frame and axles or wheels. Its role is to transmit forces and torques acting between wheels and the frame, while cushioning impacts from uneven road surfaces transmitted to the frame or body, and dampening resulting vibrations to ensure smooth vehicle operation.
17
3
Share

What are the causes of electronic throttle failure?

Electronic throttle failure causes are: 1. Throttle position sensor damage, poor contact, open circuit or short circuit in throttle position sensor wiring, incorrect initialization position; 2. Excessive carbon buildup in throttle; 3. Throttle motor damage, poor contact, open circuit or short circuit in throttle servo motor wiring; 4. Engine control unit failure. Solutions for electronic throttle failure are: 1. Remove the throttle, perform thorough cleaning, then re-match; 2. Replace faulty sensor wiring or faulty sensors. The electronic throttle is an important control component of automotive engines, consisting of the engine, speed sensor, and throttle. The electronic throttle control system enables precise control of throttle opening, improving fuel economy and reducing emissions, achieving integrated idle speed control, cruise control, and vehicle stability control, while simplifying the control system structure.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.