How long does it take for electronic surveillance to capture parking on yellow curb lines?

3 Answers
ColtonMarie
07/25/25 12:40am
Parking in yellow curb zones, whether for temporary stops or quick errands like grocery shopping, will result in a ticket and a 3-point deduction for violating prohibitory traffic markings. Below is an introduction to electronic surveillance: 1. Overview: Electronic surveillance, also known as "electronic police," is the common name for the "Intelligent Traffic Violation Monitoring and Management System." It was successfully developed in Shenzhen in 1997 and has since been widely adopted. 2. Function: Utilizing technologies such as vehicle detection, photoelectric imaging, and automatic control, electronic surveillance monitors violations like running red lights, driving in the wrong direction, speeding, and crossing lines. It captures images and data of traffic violations for subsequent processing. 3. Principle: Electronic surveillance uses induction loops to detect pressure from vehicles on the road. Sensors collect these signals and send them to the central processor, where they are temporarily stored in registers.
Was this review help?
17
3
Share
EllianaFitz
08/10/25 3:51pm
Once I parked temporarily on a yellow curb to grab something, and within less than half a minute, the electronic eye captured it. Later, the ticket showed illegal parking. Yellow lines generally indicate no-parking zones, and the cameras are highly sensitive, instantly detecting stationary vehicles. In cities, surveillance is dense, and stopping even briefly can trigger the electronic eye. Don’t believe in the myth that short stops are fine—the rule is a complete ban. My advice is to drive away immediately in such situations or find a legal parking spot in advance to avoid points and fines. With more experience, you’ll learn that walking a few extra steps to find a legal spot saves hassle and trouble. There’s not much difference between solid and dashed yellow lines—don’t test either. Pay attention to road markings while driving and develop good habits—that’s the key.
Was this review help?
18
5
Share
Expand All
Arya
08/10/25 3:52pm
Based on my understanding of traffic surveillance, electronic eyes (e-cameras) enforce no-parking zones marked by yellow curbs in real-time. The cameras or sensors scan continuously, and once illegal parking is detected, it's recorded within seconds. Legally, yellow lines indicate no parking at any time, regardless of duration. In practice, some cities allow brief loading/unloading with special permits, but ordinary drivers shouldn’t risk it. Fines can reach hundreds of yuan, and repeated violations may impact credit scores. I advise everyone to follow traffic rules and park only in designated areas. For temporary stops, white dashed zones are safer and less contentious. Don’t sacrifice long-term convenience for a few saved minutes—keeping roads clear is key.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What kind of transmission does the Axela use?

Axela adopts the Skyactiv-Drive 6-speed automatic transmission, which is developed by Mazda itself, with some components co-developed with Aisin. It is part of the "Skyactiv" technology package. Below is additional information about the Axela: 1. The Axela is equipped with two naturally aspirated engines featuring Skyactiv technology: a 1.5L and a 2.0L, with maximum power outputs of 117 horsepower and 158 horsepower, and peak torques of 148 N·m and 202 N·m, respectively. The transmission system is paired with either a 6-speed manual or a 6-speed automatic transmission. 2. In terms of suspension, the new model features a front MacPherson strut independent suspension and a rear multi-link independent suspension combination. The new Axela is positioned as a sporty compact sedan from a joint venture brand. In the current joint venture compact car market, models like the Dongfeng Honda Civic, Changan Ford Focus, and SAIC-GM Chevrolet Cruze, which also emphasize sporty styling, will be the main competitors of the Axela.
3
1
Share

Can You Charge a Car in the Rain?

Yes, but the plug must not be exposed to rain. Here is relevant information about electric vehicle charging: 1. Precautions: Water in the charger can easily burn out circuit boards and control components, and human proximity or contact may cause irreversible harm. Additionally, water ingress in the charger can lead to electronic component failures. If the charger remains in working condition, it can overcharge the battery, causing damage. 2. Charging Instructions: Charge according to the battery capacity, typically taking 8-10 hours to fully charge. Disconnect the power promptly after full charge. If the power remains on for too long, the electronic components inside the charger may overheat, potentially causing a short circuit and sparks, which could lead to a fire. Nighttime and early morning are the most prone times for fires, so it's best to charge during the day under supervision. Once the indicator light on the charger turns green, unplug it as soon as possible. The charging environment should be well-ventilated, with an optimal ambient temperature of 25°C. Avoid exposing the vehicle to direct sunlight or rain during storage.
16
3
Share

What Causes No Cooling or Airflow in Car AC at High Speeds?

The reasons why a car's air conditioning does not cool or blow air at high speeds are as follows: Reason 1: Too much dirt and dust on the condenser, leading to poor cooling performance. Reason 2: Too much debris in the air filter, affecting the blower's air intake and reducing airflow. Reason 3: Excessive dirt on the evaporator, significantly impacting both air intake and cooling, thereby severely affecting the AC's cooling performance. Reason 4: Ice formation on the evaporator surface, severely obstructing the AC's airflow. Below is an introduction to car air conditioning: Introduction 1: The heating principle of car air conditioning is simple. When the heating function is turned on, high-temperature coolant from the engine flows through the heater core, and the air blown by the blower passes through the heater core, allowing warm air to be blown out from the AC vents. Introduction 2: The cooling principle of car air conditioning is also straightforward. When the AC button is pressed, the AC compressor clutch engages, allowing the engine to drive the compressor. The compressor continuously compresses the refrigerant and sends it to the evaporator. Introduction 3: When the refrigerant expands in the evaporator, it absorbs heat, cooling the evaporator. The cooled evaporator then cools the air blown by the blower, allowing cold air to be blown out from the AC vents.
8
0
Share

Why are police lights red on the left and blue on the right?

Red is a primary color in the warm color spectrum and serves as a warning, while blue is a primary color in the cool color spectrum, creating a sharp contrast with red to better capture attention. Below is an introduction to automotive lighting: 1. Headlights: Also known as car front lights or LED daytime running lights, they serve as the 'eyes' of a car, not only affecting the owner's external image but also closely related to safe driving at night or in bad weather. The use and maintenance of car lights should not be overlooked. The car light switch is typically located on the lever under the steering wheel, usually on the left side, where lifting or pressing changes the light. Emergency lights are either on the dashboard or below the steering wheel, generally red for visibility. 2. Other lights: Emergency lights are usually near the center console as the only red button; pressing it down activates the hazard lights. Fog lights are typically on the headlight lever with a fog light symbol; rotating forward turns on the front fog lights, and rotating backward turns on the rear fog lights. High and low beams may be on the turn signal lever or control panel; switching between them involves moving the lever up or down (left or right for turn signals, up or down for high and low beams). Emergency lights on the dashboard are marked by two overlapping triangles.
2
3
Share

What are the speed requirements for gear shifting?

When the speed is between 10-20 km/h, shift to 2nd gear; when the speed is between 20-30 km/h, shift to 3rd gear; and when the speed is between 30-40 km/h, shift to 4th gear. After selecting the appropriate gear, perform the corresponding shifting operations. When upshifting, the action should be quick and smooth, and avoid looking down at the gear lever. More details are as follows: Introduction 1: Before upshifting, check the left and right rearview mirrors to ensure road safety. First, release the accelerator with your right foot, then press the clutch with your left foot, and shift to the appropriate gear. Gradually release the clutch while gently pressing the accelerator to increase speed. Introduction 2: When downshifting, also check the left and right rearview mirrors to ensure road safety. Reduce the speed to the upper limit of the target gear before shifting, for example, when downshifting from 4th to 3rd gear, release the accelerator at 40 km/h and shift to 3rd gear when the speed drops to 30 km/h. Introduction 3: During driving, always ensure the gear matches the speed. A mismatch can prevent the car from operating normally and compromise driving safety.
9
5
Share

In which cities is BYD Company located?

BYD Company has four major automobile industry bases in Xi'an, Beijing, Shenzhen, and Shanghai. BYD is a high-tech private enterprise in China, with its headquarters located in Pingshan, Shenzhen. Originally a battery manufacturer, BYD later entered the automotive industry. Here is additional information: 1. In 2003, BYD acquired Xi'an Qinchuan Automobile Co., Ltd. (now "BYD Automobile Co., Ltd."), officially entering the field of automobile manufacturing and sales and embarking on the development journey of a national independent brand. To date, BYD has established four major automobile industry bases in Xi'an, Beijing, Shenzhen, and Shanghai, achieving international leading levels in vehicle manufacturing, mold research and development, and vehicle model development. The industrial structure has gradually improved, and BYD has rapidly grown into one of China's most innovative emerging brands. 2. Automotive products include various high, mid, and low-end series of fuel vehicles, as well as automobile molds, auto parts, dual-mode electric vehicles, and pure electric vehicles. Representative models include traditional high-quality fuel vehicles such as the F3, F3R, F6, F0, G3, G3R, L3/G6, the S8 sports hardtop convertible, the high-end SUV model S6, and the MPV model M6.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.