How Long Does It Take for Car Paint to Dry?

1 Answers
VonLeilani
07/24/25 10:04pm
The time required for car painting is mainly determined by the scope of the painting. Generally, bodywork and painting repairs take about one day. If the scratches are not severe, a quick spray method can be used, which takes 3-4 hours, allowing you to pick up the car in the morning or afternoon. Below are the details regarding the time required for car painting: 1. Approximately one hour is needed: If the car requires painting, first hand it over to a professional auto body and paint center. The service advisor will greet the owner, discuss the price for the painting area, and after a full inspection and confirmation of the vehicle, issue a work order and pass the construction order to the workshop for processing. 2. Two to three hours may be needed: The bodywork technician will repair based on the size of the scratches or dents. If the dents are sharp and cover a large area, the repair difficulty increases, and the time required will be slightly longer. 3. Two to five hours may be needed: Before painting, the repair surface needs to be cleaned thoroughly, the work process needs to be assessed, and non-repair painting areas must be masked. There are 12 steps in the process, and if the primer is damaged, rust prevention treatment is also required.
Was this review help?
18
0
Share
More Forum Discussions

Is a car purchased in 2012 exempt from inspection in 2021?

2021 does not require an annual inspection. The inspection time is 2022, which involves an on-road inspection for motor vehicles. After 2022, an annual on-road inspection is required for motor vehicles. After five years, an on-road inspection is required every six months. Only after passing the inspection is the vehicle allowed to be driven on the road. The following points should be noted for the on-road inspection: 1. Vehicle appearance: Modified parts on the vehicle's exterior should be removed, and the vehicle's appearance should be intact. Damaged areas can be repaired. If the area does not exceed 30%, repainting is not required. 2. Lights: The vehicle's lighting system must function properly to ensure normal annual inspection. If issues arise, repairs can be made based on the reasons for failure, and the vehicle can undergo reinspection within the specified time.
12
3
Share

Which country is George Patton from?

George Patton is produced in the United States, and its models include: War Sword and War Vehicle, which are classified as super off-road vehicles. Taking the 2018 War Sword as an example, its body dimensions are: length 4750mm, width 2052mm, height 1803mm, wheelbase 2946mm, fuel tank capacity 85l, and curb weight 2329kg. The 2018 War Sword features a five-link solid axle non-independent suspension both in the front and rear. It is equipped with a 3.6L naturally aspirated engine, delivering a maximum horsepower of 290ps, maximum power of 213kw, maximum torque of 353nm, and is paired with a 5-speed automatic transmission.
12
4
Share

Where is the tire pressure reset button for the Volkswagen Sagitar?

Sagitar does not use a conventional mechanical reset button; the tire pressure monitoring reset needs to be done through the central control screen. The Volkswagen Sagitar's tire pressure monitoring is active monitoring, and specific values will be displayed on the central control screen. Below is more information about the tire pressure reset device: 1. The tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It uses a wireless transmitter to send the pressure information from inside the tire to the central receiver module system, which then displays the tire pressure data for each tire. 2. When the tire pressure is too low or there is a leak, the system will automatically alert. After the tire pressure monitoring system alerts, the tire pressure should be checked and replenished as soon as possible. Only after confirming that the tire pressure is normal can you continue driving. The tire pressure monitoring system will automatically reset after the vehicle has been driven for a certain distance.
17
1
Share

Is vehicle damage assessment determined by the insurance company or the repair shop?

Vehicle damage assessment is generally conducted by an insurance adjuster dispatched by the insurance company to the scene. Below are relevant details about vehicle damage assessment: 1. Conditions requiring vehicle damage assessment: Currently, most auto insurance policies in the market offer self-inspection and claims settlement functions for minor damages. Only when the damage exceeds a certain amount will an adjuster be sent to the scene for inspection and assessment after the policyholder reports the claim. However, there may be exceptional cases involving minor damages that still require on-site assessment by an adjuster. 2. On-site handling of vehicle accident damage assessment: Insurance company personnel will arrive at the scene and issue an "Inspection Report"; simultaneously, traffic police will also attend and provide an "Accident Determination Certificate". The vehicle owner only needs to take the damage assessment report and accident determination certificate to the repair shop for vehicle repairs.
20
4
Share

How to turn off the Sagitar with one-key start?

Sagitar one-key start failure may be caused by a malfunctioning start switch, and the owner should replace the switch promptly. Relevant information about one-key start is as follows: 1. The device is part of a smart car, a button device that simplifies the starting process and can also turn off the engine. This device can be modified at the original car key lock position or installed as an independent panel. 2. There are three main points to note when installing a one-key start system (the wiring of the ignition switch connector, the position of the button, and the handling of the steering lock), and it has multiple functions. The starting method is: use the central control to open the car door, press the one-key start button, and after the dashboard lights up, press the button again while stepping on the brake to start the engine. For manual transmission cars, remember to put the gear in neutral.
19
1
Share

Where is the oil filter located on the Boyue?

The oil filter of the Boyue is located at the upper right front of the engine. In this position, there is a cylindrical component, which is the oil filter, also known as the oil cartridge. The function of the oil filter is to remove impurities, gums, and moisture from the engine oil, delivering clean oil to various lubrication points. Relevant information about the Boyue is as follows: 1. The Boyue is an SUV under the Geely Automobile Group, equipped with numerous intelligent features such as a voice interaction system, urban pre-collision system, intelligent high beam, and PM air management system. 2. The dimensions of the Geely Boyue are 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm. The front suspension adopts a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.