How Long Does It Take for a New Driver's License to Take Effect?

1 Answers
CadenDella
07/24/25 11:54pm
The new driver's license takes effect on the same day of replacement. Expired driver's license: If expired for less than one year, you can renew it normally; if expired for more than one year but less than three years, the license will be canceled, but you can renew it by passing the subject one exam; if expired for more than three years, the license will be invalid and cannot be renewed. Notes for license renewal: Motor vehicle drivers should apply for license renewal at the vehicle management office of the license issuing authority within 90 days before the expiration of the driver's license. The following documents must be submitted: the driver's identity proof; the driver's license; a medical certificate issued by a county-level or higher medical institution or a military medical institution at or above the regimental level.
Was this review help?
5
5
Share
More Forum Discussions

What are the hazards of starting the car with the air conditioner on?

Starting the car with the air conditioner on has a slight impact on the engine, making it prone to carbon buildup, which can lead to carbon deposits accumulating at the exhaust pipe's tailpipe, and it also increases fuel consumption. Although idling the car with the air conditioner on does not cause significant harm, it is still recommended to minimize such situations. Here is some additional information: 1. Principle of car air conditioning cooling: The car air conditioner is a crucial comfort feature in a vehicle, capable of both cooling and heating. When cooling, the compressor clutch engages, and the engine drives the compressor to operate. The compressor continuously compresses the refrigerant and delivers it to the evaporator. Inside the evaporator, the refrigerant expands and absorbs heat, thereby cooling the evaporator. The cooled evaporator then cools the air blown by the blower, allowing the car air conditioner to blow cold air from the vents. 2. Principle of car air conditioning heating: The heating principle of the car air conditioner is simpler. During heating, the high-temperature coolant from the engine enters the heater core, and the air blown by the blower passes through the heater core, allowing the car air conditioner to blow warm air from the vents.
9
4
Share

What Causes the Abnormal Noise When Shifting from 2nd to 3rd Gear in a Volkswagen Passat?

When abnormal noises occur in an automatic transmission, it is often not due to damage to the internal valve body but rather the presence of stubborn dirt and impurities inside. Especially when these contaminants accumulate within the valve body, they can form blockages, preventing effective regulation of oil pressure and leading to issues such as jerking, impact, and slippage. Additionally, the problem of high transmission temperatures should not be overlooked. Factors involved: High temperatures can degrade the quality and frictional properties of automatic transmission fluid, increasing friction and wear, which in turn leads to transmission noise. At the same time, sludge (impurities or dirt) can form inside the transmission (e.g., in the valve body), causing jerking and impact. If the temperature exceeds 120 degrees Celsius, rubber sealing materials will begin to harden, eventually leading to leaks and reduced hydraulic pressure. At even higher temperatures, the transmission may start to slip, and this slippage can further raise the temperature. If not addressed promptly, the transmission may fail completely. Precautions: To thoroughly resolve transmission issues and prevent their recurrence, it is essential to remove stubborn dirt and impurities from the transmission and effectively control its operating temperature.
1
1
Share

What does it mean when the exclamation mark warning light comes on in a Jetta?

There are three scenarios when the exclamation mark warning light illuminates in a Jetta: first, the general fault indicator light comes on; second, the tire pressure indicator light activates; third, the lighting fault light turns on. General Fault Indicator: The yellow triangle with an exclamation mark is the general fault indicator. It may illuminate due to reasons such as clutch overheating, fuel cut-off system intervention or malfunction, parking sensor failure, exterior light bulb failure, engine oil pressure sensor malfunction, or traction control system warning/failure. Tire Pressure Indicator: The tire pressure indicator, which also features an exclamation mark, briefly lights up during ignition before automatically turning off after a few seconds - this is normal. However, if the tire pressure indicator remains lit or flashes continuously, the most likely cause is abnormal pressure in one of the tires. Lighting Fault Indicator: The lighting fault indicator activates when an exterior light bulb malfunctions. This warning displays a bulb symbol with an exclamation mark inside, classifying it among the exclamation mark warning lights.
8
1
Share

What is the reason for unstable idle speed after cleaning the throttle body of the new X-Trail?

New X-Trail's unstable idle speed after cleaning the throttle body is caused by the throttle opening not being reset. Due to long-term carbon buildup, the carbon deposits squeeze the throttle body, causing its opening to expand accordingly. After cleaning the throttle body, if it is not reset and the throttle opening remains in the pre-carbon buildup state, it will lead to increased air intake, and in severe cases, unstable idle speed may occur. Computer reset of throttle opening: Most modern cars use electronic throttle bodies, which require a diagnostic tool to match the computer for throttle initialization to achieve normal idle speed. Some older models still use mechanical cable-operated throttle bodies, and these vehicles will gradually restore the throttle opening to the initialized state during subsequent driving. Manual reset of throttle body: Before cleaning the throttle body, disconnect the negative terminal of the battery, or after cleaning, turn the key to the ON position and wait for a few minutes before turning it off. Then turn it to the ON position again, press the accelerator pedal fully without starting the engine, and then start the engine.
7
2
Share

Is it okay to turn the steering wheel while stationary?

It is not advisable to turn the steering wheel while the car is stationary. Although modern vehicles are equipped with power steering, turning the wheel while stationary is different from doing so while driving, especially in terms of the impact on the tires, which can cause damage. Below are the specific damages caused by turning the steering wheel while stationary: 1. Tire damage: Tires are made of synthetic rubber and bear the weight of the entire vehicle, which can be over a ton. Turning the steering wheel while stationary increases the sliding friction between the tires and the ground, leading to increased surface wear and a shortened tire lifespan. 2. Steering wheel wear: Repeatedly turning the steering wheel while stationary can cause significant damage to the steering system. The steering wheel is subjected to high stress and requires substantial power assistance, which can lead to excessive play in the linkage system. This results in premature aging of the steering wheel, reduced operational flexibility, slower response times, and potential safety hazards. 3. Damage to the steering gear: Most vehicles' steering gears, whether electronic or hydraulic, operate similarly. The steering wheel's input is transmitted to the steering gear, which then moves the tie rods. It's important to note that stationary steering can harm the steering gear and tie rods in the same way as it damages the tires, due to excessive force being applied.
13
5
Share

Can an automatic transmission car switch from D gear to S gear while driving?

An automatic transmission car can switch from D gear to S gear while driving. The method for switching between D and S gears in an automatic transmission car is as follows: 1. To shift from D to S, press the shift lock without releasing the accelerator or applying the brakes; 2. To shift from S to D, simply push the gear lever directly without releasing the accelerator or applying the brakes. The gears of an automatic transmission include: 1. P (Parking gear, starting gear); 2. R (Reverse gear); 3. N (Neutral gear); 4. D (Drive gear); 5. L (Low gear); 6. S (Sport mode); 7. OD (Overdrive gear). The correct way to use an automatic transmission is: 1. Start the vehicle in P or N gear, shift the gear lever out of P gear while pressing the brake, turn on the power and press the brake to shift to N gear, then shift to D gear after ignition and drive forward; 2. When switching between N, D, and L gears, there is no need to press the shift button. To shift from L gear to lower restricted gears, press the shift button, but shifting from lower to higher gears does not require pressing the shift button; 3. Do not shift into N gear while driving to coast; 4. Do not push into P gear while driving; 5. After driving, the engine must be turned off and the gear must be shifted to P gear before the key can be removed.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.