···
Log in / Register

How long does it take for a new car's fuel consumption to decrease?

4 Answers
Lindsey
07/28/25 10:58pm

New cars typically reach their normal fuel consumption levels after driving approximately 3,000 kilometers. Generally, fuel consumption begins to decrease after the initial 1,000-kilometer break-in period. Here are the relevant details: Reasons: The components of a new car fit together more tightly, preventing the engine from fully utilizing its power, which ultimately results in higher fuel consumption. If the car is frequently driven at low speeds in urban areas, it will inevitably exhibit higher fuel consumption. Other factors influencing fuel consumption include driving conditions, driving habits, vehicle maintenance, and load capacity. Additional information: After a cold start, it's advisable to let the engine warm up until the water temperature changes before driving. Additionally, it's best to limit the load to no more than 70% of the vehicle's specified capacity.

Was this review help?
8
1
Share
MacHaven
08/12/25 2:20am

I remember when my new car first arrived, the fuel consumption was always on the higher side. In the first few days of city driving, my car's fuel consumption could reach 10L/100km, which was indeed quite costly. It wasn't until around 500 kilometers that it started to drop, and by 1000 kilometers, it stabilized at around 7.5L. New cars all need a break-in period, where the new parts inside the engine adapt to each other, much like friends needing time to get used to each other when they first meet. While driving, I tried to maintain a steady speed, avoiding sudden acceleration and hard braking, which helps the engine adapt faster and reduces unnecessary wear. After this phase, not only did the fuel consumption drop by about 15%, but the car also ran smoother, with much steadier starts. Regular maintenance shouldn't be overlooked—changing the oil on time and other upkeep can help keep fuel consumption at its best.

Was this review help?
7
2
Share
Expand All
VanHazel
10/01/25 4:54am

I always try to save some money on fuel when driving. Don't worry about the high fuel consumption during the break-in period of a new car; it usually drops significantly after driving about 1,500 kilometers. My experience is to pay attention to driving habits from the moment you get the new car, such as driving slowly in the city, not speeding too much on the highway, and starting smoothly with fewer sudden stops. The fuel consumption in the first 500 kilometers might be around 11L, but it gradually dropped to about 8L in just a few months. After the engine is properly broken in, its coordination improves, and reduced resistance naturally leads to fuel savings. I also noticed by recording the fuel gauge that highway driving helps the break-in process faster than congested roads. It's advisable not to overload the car within the first thousand kilometers and to control the gear-shifting timing to accelerate the break-in, which not only stabilizes fuel consumption but also extends the car's lifespan.

Was this review help?
4
2
Share
Expand All
SanJayden
11/14/25 6:42am

I just bought a new car, and the fuel consumption was quite high at first. A friend told me there's a break-in period. Simply put, the new engine needs time to adapt, and after driving a few hundred kilometers, it will normalize. My car's fuel consumption dropped from 10L to 7.5L over about 600 kilometers. Just drive gently and avoid stomping on the accelerator too often.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

Which Volvo Technologies Are Used in the Lynk & Co 06?

The Lynk & Co 06 is equipped with a 1.5T three-cylinder engine that incorporates Volvo technology. Its overall performance is not inferior to some 1.8T engines, delivering a maximum power of 130kW (177PS) and a maximum torque of 265N·m. The transmission is a 7DCT gearbox. Here are other details about the Lynk & Co 06: 1. Exterior Design: Unlike conventional floating roof designs, it features sharp angular lines, giving it a more dynamic and powerful appearance. The Lynk & Co 06 also offers a two-tone body color option. 2. Interior Design: The cabin combines light and dark-colored panels and adopts a dual-screen layout for the instrument cluster and infotainment system. 3. Features: It comes with a parking camera, ACC adaptive cruise control, a panoramic sunroof, and more.
7
4
Share

What is the SET button in a car?

The SET button in a car is a speed adjustment switch, which serves as the speed regulation indicator for cruise control. When setting the cruise control, the vehicle needs to be accelerated to the desired speed, and then the SET button is pressed to adjust. To use cruise control, first press the ON button to activate the cruise control function. When setting the cruise control speed, press the SET button to configure it. Cruise control has speed limitations, typically requiring the vehicle to be traveling at least 48 km/h. If the brake pedal is pressed during driving, the cruise control will deactivate. To resume cruise control, press the RSM button in the car. To increase the cruise control speed, press the ACCEL button. To decrease the cruise control speed, press the CST button. The cruise control function in a car works by using a speed sensor to transmit signals and compare them with the set speed, ensuring the vehicle maintains the preset speed. The car's computer can then provide the most accurate fuel supply. Using cruise control allows for more complete fuel combustion in the engine, while also reducing fuel consumption.
16
2
Share

Solutions for Corolla Remote Key Failure?

Hold down the unlock button on the remote key, insert the key into the ignition hole, quickly turn the key to the car self-check position, immediately turn the key back to the lock position, and quickly repeat this process three times. Here is the relevant introduction to the Toyota Corolla: 1. Comprehensive safety features. The Toyota Corolla U.S. version comes standard with front and side airbags, and is equipped with the Toyota Safety Sense driver assistance suite, including standard features like lane departure alert, rearview camera, pre-collision system with pedestrian detection, automatic high beams, and dynamic radar cruise control. 2. Stable quality with low maintenance costs. Although the Toyota Corolla is not a luxury car, it has very stable quality and very affordable after-sales maintenance. 3. Spacious rear seat space. The Toyota Corolla focuses on space, with not only the domestic version offering large interior space, but the overseas version also providing ample room, with rear seat space up to 40 inches.
7
2
Share

What does the pressure gauge pointer indicate for normal pressure in a fire extinguisher

The pressure gauge pointer of a fire extinguisher indicates normal pressure when it is in the green zone. The normal pressure value of a fire extinguisher is approximately between 1.2—1.5 MPa. If the pointer is in the red zone, it means the pressure inside the cylinder is insufficient, indicating the fire extinguisher cannot be used normally. If the pointer is in the yellow zone, it indicates overpressure, meaning the pressure is too high and poses a potential danger (however, slight overpressure may still be considered normal). Relevant information about fire extinguishers is as follows: 1. Introduction: A fire extinguisher, also known as a fire cylinder, is a portable firefighting tool. It contains chemicals used to extinguish fires. The fire extinguisher is a sturdy metal cylinder filled with water or fire-extinguishing materials. 2. Working Principle: When the lever at the top of the cylinder is pressed, the high pressure generated forces the extinguishing agent inside the cylinder out, similar to how a spray can ejects its contents. The function of a fire extinguisher is to displace air, depriving the fire of oxygen and thus extinguishing it.
2
1
Share

What is the difference between a DSG transmission and an AT transmission?

The differences between a DSG transmission and an AT transmission are as follows: 1. AT: The torque converter is the most distinctive component of an AT transmission, consisting of components such as the pump wheel, turbine, and guide wheel, which directly input engine power to transmit torque and perform clutch functions. The pump wheel and turbine form a working pair, similar to two fans placed opposite each other, where the wind generated by one active fan drives the blades of the other passive fan to rotate, with the flowing air—wind—serving as the medium for kinetic energy transmission. 2. DSG: The DSG transmission is distinctly different from traditional automatic transmissions, as the DSG does not use a hydraulic torque converter from the outset. This transmission was not developed based on the conventional concept of an automatic transmission. The engineers who designed the DSG took an innovative and entirely new technological path, cleverly combining the flexibility of a manual transmission with the convenience of a traditional automatic transmission.
11
1
Share

What is the phenomenon of drivers using their eyes, ears, hands, and feet simultaneously while driving?

Drivers using their eyes, ears, hands, and feet simultaneously while driving is known as attention allocation. Here is relevant information: 1. Driving precautions: Suburban roads: There are many intersections, so be cautious of motorcycles and bicycles suddenly appearing from side roads. Avoid driving too close to the right boundary of the road and maintain sufficient safety distance. When pedestrians (especially the elderly or children) are present, remain highly alert, keep a safe distance, and control your speed. 2. "Three precautions": Pay attention to food hygiene: Due to the mobile nature of driving jobs, always choose clean and hygienic restaurants when dining to prevent infectious diseases. Pay attention to rest: Ensure adequate sleep to stay energetic and focused, enabling safe driving. Maintain a safe following distance: While driving, keep sufficient longitudinal and lateral safety distances, always be aware of the movements of vehicles and pedestrians, and avoid following the vehicle ahead too closely or driving side by side to prevent rear-end collisions and side-swipe accidents.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.