How Long Does It Take for a Minor Traffic Violation to Be Processed?

1 Answers
DelSamuel
07/30/25 3:34am
Generally, it takes about 24 hours for minor traffic violations to be processed within the same province, and approximately 48 hours for cross-province violations to be queried. Below is relevant information regarding the handling of traffic violations: 1. Time Frame: Vehicle owners must report to the local traffic police station within 15 days of receiving the penalty SMS for the violation. Failure to do so within this period will result in a daily late fee of 3% of the original fine, though the total late fee will not exceed double the original fine amount. Early handling is advised to avoid unnecessary penalties. 2. Verification Method: The quickest and most effective way to confirm whether you have run a red light is to inquire at the vehicle management office or traffic police station. You will need to bring your driver's license, vehicle registration certificate, and ID card—all three are essential. It is also advisable to carry some cash (running a red light typically incurs a fine of 200 yuan, with additional penalties for other violations). This way, even if a violation is found, you can immediately proceed with the necessary formalities.
Was this review help?
12
0
Share
More Forum Discussions

What brand is Yokohama tire?

Yokohama is the tire of Yokohama Rubber, originally known as Yokohama Tire. Yokohama Tire was established in Yokohama, Japan in 1917 and entered China in 2006. According to the English homophonic translation, it is called Yokohama, which is a world-renowned high-end tire brand. Yokohama tires not only have low fuel consumption performance, but also have excellent quietness and comfort, which can increase driving pleasure. It is a low-fuel-consumption tire that is more friendly to the environment and humans. Cars that use Yokohama tires include Dongfeng Honda, GAC Mitsubishi, GAC Honda, GAC Toyota, FAW Toyota, Changan Suzuki, Dongfeng Nissan, etc.
1
3
Share

What to Do When a Vehicle's Steering Suddenly Fails

Correct handling methods for steering failure: 1. When the steering suddenly fails, do not panic: Stay calm, first release the accelerator pedal completely. 2. Do not brake immediately; apply the brakes gradually: Especially at higher speeds, brake gently step by step. 3. Use engine braking to reduce speed: Downshift to slow down, but remember not to shift directly to first gear; downshift sequentially. 4. When steering fails, remember to alert vehicles behind you: The first step is to quickly turn on the hazard warning lights. 5. Once the speed has decreased, use the parking brake to slow down: Pull the handbrake slowly, not too abruptly. After gaining control of the vehicle, place a warning triangle 150 meters behind the car.
18
4
Share

Should Brake Pads Be Replaced for Both Front and Rear Wheels Simultaneously?

Front and rear brake pads do not need to be replaced at the same time, as they have different replacement cycles. Relevant details are as follows: 1. Compared to front brake pads, rear brake pads have a longer service life. Under normal driving conditions, front brake pads typically require replacement every 30,000 to 50,000 kilometers, whereas rear brake pads can last between 60,000 to 100,000 kilometers before needing replacement. 2. There is no fixed interval for brake pad replacement. The replacement cycle depends not only on the service life of the brake pads but also on driving conditions and individual driving habits. New brake pads are approximately 1.5 centimeters thick. When they wear down to one-third of their original thickness, or about 5 millimeters, they should be replaced promptly. When replacing brake pads, both pads on the same axle must be replaced together to ensure balanced braking performance on both sides.
8
3
Share

Where is the windshield washer fluid reservoir located in the Envision?

The windshield washer fluid reservoir in the Buick Envision is located at the lower right corner of the engine compartment, with a cap marked with a washer symbol. The Envision's windshield washer fluid capacity is 4L, and it should be refilled appropriately according to the remaining amount. Windshield washer fluid is only consumed when used, so there is no fixed refill interval - simply top it up when the level is low. Here are the steps to refill the windshield washer fluid in the Envision: 1. Turn on the windshield wiper switch to spray out the old fluid first. 2. When the wiper nozzles stop spraying, locate the washer fluid reservoir and add a small amount of new solution. 3. Turn on the wiper switch again to clear out any remaining old fluid. 4. When no more fluid sprays from the nozzles, add approximately 4L of new windshield washer fluid, then securely close the cap.
18
1
Share

Can Alcohol Be Added to Car Windshield Washer Fluid?

Industrial alcohol is required, but it is not recommended to use alcohol-based substances as windshield washer fluid. Especially when DIY-ing without proper control of proportions, the risks are greater. Relevant information is as follows: 1. Adding alcohol alone to windshield washer fluid cannot prevent freezing. Windshield washer fluid contains alcohol and ethylene glycol, which significantly lower the freezing point of the liquid, providing antifreeze effects and quickly dissolving frost. 2. High-quality windshield washer fluid is made from deionized water and various environmentally friendly additives, offering functions such as dirt removal, antifreeze, antistatic, and anti-corrosion. Some superior quality windshield washer fluids also feature rapid snow and ice melting, anti-glare, and anti-fog properties, playing a significant role in enhancing driving safety.
19
3
Share

What are the benefits of a multi-link independent suspension?

It can improve vehicle driving stability and effectively reduce tire friction. The following is an introduction to multi-link suspension: 1. Functional characteristics of multi-link independent suspension: Multi-link suspension not only ensures a certain level of comfort but also, due to the numerous links, allows the wheels and the ground to maintain as vertical a position as possible, minimizing body tilt to the greatest extent. It maximizes tire contact with the ground. 2. Material characteristics of multi-link independent suspension: The structure of multi-link suspension is relatively complex, with material costs, research and development experiment costs, and manufacturing costs far exceeding those of other types of suspension. Moreover, it occupies a large amount of space. Due to cost and space considerations, small and medium-sized vehicles rarely use this type of suspension.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.