How long does it generally take to study for Subject 3 before taking the test?

What to Do If You Are Caught by Surveillance for Failing the Exhaust Emission Test?

Exceeding the exhaust emission standards may result in a fine of up to 200 yuan for the driver and a deduction of 3 points. Below are the reasons that may cause excessive exhaust emissions: 1. The main reason is the use of low-quality fuel. It is advisable to choose gas stations of well-known brands when refueling. 2. Using low-quality fuel can lead to incomplete combustion in the engine, resulting in carbon buildup. 3. A clogged catalytic converter or a malfunctioning oxygen sensor can also cause excessive exhaust emissions. Here are some precautions regarding exhaust emissions: 1. During the annual inspection, the OBD (On-Board Diagnostics) will be checked, which primarily monitors whether the vehicle's exhaust emissions meet the standards. 2. If the OBD check fails, the annual inspection will be affected. Therefore, before the inspection, you can visit a 4S shop to check if there are any fault codes in the OBD. 3. If there are any fault codes, they should be cleared promptly. After clearing the fault codes, the vehicle should be driven sufficiently for a certain distance before the annual inspection to ensure there are no major issues during the OBD check.

11

0

Share

Which region's license plate starts with the character 'Dong'?

Currently, there are no license plates in China that start with the character 'Dong'. Below is an introduction to the composition of license plate numbers: 1. The first character of a license plate is a Chinese character, representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation for provinces, municipalities, or autonomous regions. 2. The second character of a license plate is an English letter, representing the prefecture-level administrative region where the vehicle is registered, which is the letter code for prefecture-level cities, regions, autonomous prefectures, or leagues. The ranking is generally determined by the provincial vehicle management office based on the status of each prefecture-level administrative region. Below is some related information about license plates: 1. A license plate refers to the vehicle registration plate, which is hung on both the front and rear panels of the vehicle. 2. The materials used are aluminum, plastic, or stickers, and the plate displays the vehicle's registration number, registration region, or other basic information. 3. The main function is that through the license plate, one can identify the province, city, or county to which the vehicle belongs, and the vehicle management office can trace the owner of the vehicle based on the license plate.

2

5

Share

What to Do When Unable to See the Road Clearly While Driving at Night?

Here are solutions for unclear vision while driving at night: 1. Reduce your speed, especially when navigating curves, slopes, bridges, narrow roads, or areas with poor visibility, and always be prepared to brake or stop. 2. When overtaking, first continuously switch between high and low beams to signal the vehicle ahead. Only proceed with overtaking after confirming it is safe to do so. 3. Increase the following distance to prevent collisions between vehicles. 4. Avoid driving while fatigued. Here are methods to ensure safe driving: 1. Check your vehicle's condition to avoid driving with potential hazards. 2. Fasten your seatbelt and enhance safety awareness. 3. Do not drive while fatigued. 4. Do not drink and drive. 5. Be cautious of road conditions in bad weather. 6. Handle any unexpected situations on the road properly. 7. Follow traffic rules and avoid rushing.

6

3

Share

Is it necessary to replace the shock absorber assembly?

In most cases, shock absorbers do not need to be replaced in pairs; you can replace only the one that is damaged. Here is some relevant information about shock absorbers: 1. For most vehicles, shock absorbers have a relatively long lifespan, typically lasting 5 years or over 80,000 kilometers before they start to fail. The lifespan depends on factors such as the quality of the shock absorber, road conditions, load weight, and driving intensity, so even the same model of car can vary significantly. 2. Damaged shock absorbers can affect vehicle stability and comfort during emergency braking, sharp turns, or driving on bumpy roads, so they should be replaced promptly. Additionally, for the vast majority of vehicles, a wheel alignment is not necessary after replacing the shock absorber, as the process of removing and installing the shock absorber does not alter the alignment data.

8

1

Share

What is the method for replacing the air conditioning filter in the Volvo S60L?

The air conditioning filter in the Volvo S60L is located inside the glove compartment in front of the passenger seat. Open the glove compartment to access the air conditioning filter. Open the slots on both sides of the air conditioning filter cover, pull out the old filter, and insert the new filter according to the direction marked on it. Additional relevant information is as follows: 1. The Volvo S60L is a mid-size sedan based on the Volvo S60 prototype. Its body dimensions are 4715mm in length, 1866mm in width, and 1481mm in height. 2. In terms of exterior features, the Volvo S60L comes standard with LED daytime running lights, high-mounted brake lights, home lighting function, electric sunroof, and pressurized front windshield.

1

2

Share

What is the image explanation for the tire pressure reset of the 2019 Sylphy?

First, inflate the tires to the normal pressure range; use the multifunction buttons on the steering wheel to locate the 'Tire Pressure Monitoring System Settings' in the trip computer, which must be done with the ignition on; after entering, find the 'Tire Pressure Reset' option and press it to restore the tire pressure values. Method for replacing tires on the Nissan Sylphy: 1. First, park the vehicle on a flat surface. If the situation occurs while driving on the road, place a safety warning sign at least 150 meters behind the vehicle. Use tools to remove the tire nuts, loosening them diagonally. 2. Align the jack with the support points under the vehicle, then slowly adjust the jack to raise the chassis. Once the tire is off the ground, it can be removed. If it fits tightly and cannot be taken off, you can gently kick it a couple of times. 3. Place the new tire in position, then slowly lower the vehicle. Finally, when tightening the nuts with tools, use the same diagonal tightening method. The nuts can only be tightened after the vehicle is lowered and the tires touch the ground.

1

0

Share

How long does it generally take to study for Subject 3 before taking the test?

What to Do If You Are Caught by Surveillance for Failing the Exhaust Emission Test?

Which region's license plate starts with the character 'Dong'?

What to Do When Unable to See the Road Clearly While Driving at Night?

Is it necessary to replace the shock absorber assembly?

What is the method for replacing the air conditioning filter in the Volvo S60L?

What is the image explanation for the tire pressure reset of the 2019 Sylphy?

What Causes Vibration in D Gear but Not in N Gear When Braking?

How long is the NIO ES6's range?

What does the Audi brake pad warning mean?

Is the brake on the left and the accelerator on the right in an automatic transmission car?