How long does it generally take to learn Subject 3?

1 Answers
DiEleanor
07/29/25 8:22pm
Generally, the required learning hours exceed 24 class hours. According to regulations, the class hours for Subjects 1 to 4 are 12-16-24-10 respectively, with Subject 3 requiring 24 hours. Only after completing the specified training duration is one eligible to take the exam. Below is relevant information: 1. Subject 3: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviated name for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of driving licenses. 2. Test content: vehicle preparation, simulated nighttime lighting test, starting, driving straight, gear shifting operations, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving.
Was this review help?
6
3
Share
More Forum Discussions

How to Operate a Manual-Automatic Transmission Car on a Steep Slope?

Press the brake pedal of the manual-automatic transmission, press the one-touch start button of the manual-automatic transmission, the dashboard lights up, and the vehicle starts. Place the automatic gear lever of the manual-automatic transmission in the D/S position to enter manual mode. Push the gear lever forward once to increase one gear. Push the gear lever forward once more to reach second gear. Start in first gear and shift up to second gear when going uphill.
5
3
Share

How to Remove Carbon Deposits from a Car?

It is necessary to disassemble the engine and then completely and thoroughly remove carbon deposits from the components using methods such as cleaning agents or ultrasonic cleaning. Inject the cleaning agent into a machine, then pressurize it into the combustion chamber to allow the cleaning agent to react with and dissolve the carbon deposits, and finally extract the waste liquid.
19
0
Share

What are the length, width, and height of the Volkswagen Tharu?

The length, width, and height of the Tharu are 4453mm, 1841mm, and 1632mm respectively, with a wheelbase of 2680mm. The Tharu is built on Volkswagen's MQB platform and is positioned below the Tiguan L, serving as the successor to the older Tiguan model. The Tharu is a compact SUV under the Volkswagen brand, equipped with 1.4T and 2.0T turbocharged engines. The maximum power outputs are 110kW and 137kW respectively, with peak torques of 175Nm, 250Nm, and 320Nm. It is paired with a 7-speed dual-clutch transmission (DCT). The vehicle has a top speed of 200 km/h, with a front suspension type of MacPherson independent suspension and a rear suspension of multi-link independent suspension. The 1.4-liter turbocharged engine in the Volkswagen Tharu delivers a maximum power of 110kW and a maximum torque of 250Nm. This engine reaches its maximum power at 5000 rpm and its maximum torque between 1750 and 3000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
7
4
Share

How to Fix Low Volume in Car Audio System?

Software players need to be turned up higher, otherwise the volume will be low. Check this item, and if this is the issue, please adjust the volume to an appropriate level. Unplug and replug the speaker connector, then try turning on the audio again. The music file itself has a low bitrate, resulting in low volume. Try switching to a different song for testing.
2
0
Share

How to Adjust Ignition Timing?

Locate the top and bottom dead center marks on the circumference of the crankshaft pulley; rotate the crankshaft until the piston is just at the compression top dead center position, then install the dial indicator bracket and the indicator head. Ensure the dial indicator's contact tip is perpendicularly touching the exhaust valve spring seat and maintains a certain pressure; rotate the dial to align the large pointer of the dial indicator with "0". Install an angle disk on the flywheel, slowly rotate the flywheel, and observe the change in the dial indicator pointer. When it moves away from the "0" value, this indicates the exhaust valve opening time.
2
2
Share

What to Do When Your Car is Frozen by Snow?

Start the car, and once the engine's water temperature rises, use the warm air to blow on the windshield until the ice layer melts. When there is snow and ice on the glass, use a plastic scraper or a glass frost scraper to remove it. Pour warm water over the frozen area or wipe it with warm water, but make sure to dry all residual water immediately after opening the door; otherwise, thicker ice will form in the door gaps.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.