How long does it generally take for a traffic violation to appear on the 12123 platform?

2 Answers
JasmineLynn
07/28/25 11:37pm
Generally, after receiving an on-site parking ticket from traffic police, the violation can be queried within approximately 3 to 7 days, and it should not exceed 13 working days at the latest. If no illegal parking record is found after about 13 days, you can inquire at the traffic police department. Below is some extended knowledge: Methods for handling violations: 1. Users can independently handle non-on-site traffic violation records with a single fine amount of 200 yuan or less and cumulative demerit points under 12 for their own vehicles and up to 3 bound non-personally owned vehicles; 2. Independently pay fines for traffic violations issued by officers on-site; 3. Independently handle traffic violation records for their own vehicles and up to 3 bound non-personally owned vehicles; 4. Handle non-on-site traffic violation records nationwide for their own vehicles and bound non-personally owned vehicles.
Was this review help?
16
5
Share
DiHailey
08/12/25 3:58am
I've been driving for over ten years and have developed the habit of checking the 12123 app immediately after any traffic violation. Generally, violations caught by cameras appear within 1-3 days. For example, when I was last caught speeding, the notification popped up on the third day. However, don’t be too impatient—sometimes the system can delay up to a week, especially during holiday backend maintenance or when there’s a large volume of data. To stay safe, I’ve made it a habit to check the mobile app daily to avoid forgetting to handle violations and incurring doubled fines. As a side note, parking violations are more likely to be delayed, so I recommend checking weekend records on Mondays. Overall, the 12123 app is quite convenient, and checking it regularly can give you peace of mind while driving. Don’t wait for notifications to react passively.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What does a combined high/low beam headlight mean?

Combined high/low beam headlights refer to a single bulb that contains both high beam and low beam functions, with two filaments inside the bulb allowing for instant switching. The working principle of combined headlights is as follows: one set of light beams is reflected directly forward by the lamp reflector, known as the high beam; the other set is a deflected beam, where the light is blocked by a shade to the upper part of the lamp reflector, resulting in downward-diffused light directed at the ground without causing glare to oncoming drivers, known as the low beam. Features of combined high/low beam headlights: 1. Energy-saving with a long lifespan; 2. Enhanced brightness of road signs and indicators; 3. Clear visibility in hazy weather; 4. Prevention of filament breakage and burnout; 5. Minimal radiation production.
2
4
Share

Should You Press the Clutch When Starting a Car?

When starting a car, pressing the clutch can prevent the vehicle from suddenly lurching forward and causing an accident. The functions of the clutch are: 1. Gradually increasing the driving force to ensure a smooth start; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impacts from the engine, thereby extending the lifespan of transmission gears. The working principle of the clutch is: 1. When the inner race is fixed, the outer race can rotate freely in the clockwise direction without locking the wedge block; 2. When the outer race rotates counterclockwise, the wedge block locks, preventing the outer race from rotating. Severe clutch wear can lead to: 1. Slipping and insufficient power; 2. Difficulty starting the car or ignition problems; 3. Poor climbing performance and increased fuel consumption.
17
0
Share

What are the body dimensions of the Acura MDX?

Acura MDX body dimensions are: length 4985mm, width 1975mm, height 1715mm, with a wheelbase of 2820mm. Taking the 2017 Acura MDX as an example, it is a mid-size SUV with a front track of 1685mm, rear track of 1685mm, minimum ground clearance of 185mm, and a curb weight of 2068kg. The 2017 Acura MDX features a MacPherson strut front suspension and a multi-link rear suspension, equipped with a 3.0L naturally aspirated engine producing a maximum horsepower of 261ps, maximum power of 192kw, maximum torque of 296nm, paired with a 7-speed dual-clutch transmission.
20
3
Share

What Causes Abnormal Noise in the Engine Transmission?

The causes of abnormal noise in the engine transmission are: 1. Wear and damage of bearings; 2. Abnormal gear meshing clearance; 3. Gear tooth surface metal peeling, tooth breakage, or misalignment during assembly; 4. Insufficient lubrication due to inadequate lubricant; 5. Water ingress into the transmission; 6. Loose bolts in the transmission housing; 7. Excessive play between the gearshift lever and the shift fork groove in a manual transmission; 8. Long-term lack of automatic transmission fluid replacement; 9. Use of inferior automatic transmission fluid. Transmissions are divided into manual transmissions and automatic transmissions. Manual transmissions mainly consist of gears and shafts, while automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system.
8
3
Share

Is Power Steering Fluid the Same as Transmission Oil?

Transmission oil and power steering fluid are not the same. Transmission oil primarily functions to maintain the cleanliness of the gear system and provides lubrication to the transmission components, extending their lifespan. Related details are as follows: 1. Due to differences in transmission design, transmissions are categorized into manual and automatic types. Each transmission design has specific technical requirements. Even the same model of transmission configured in different vehicle models will vary in torque, weight, rotational speed, and structure. Therefore, the original manufacturer specifies a dedicated transmission oil for each. 2. Power steering automatically provides steering force when the driver turns the wheel, thereby reducing the driver's steering effort. Power steering fluid is a medium oil added to the power steering system, serving to transmit steering force and provide cushioning.
5
3
Share

What is the difference between dry and wet oil in dual-clutch transmissions?

Here are the differences between dry and wet dual-clutch transmissions: 1. Different cooling methods: Dry dual-clutch transmissions use air cooling to dissipate heat, while wet dual-clutch transmissions are immersed in oil, resulting in higher cooling efficiency. 2. Different clutches: Dry clutches use manual transmission friction plates with high mechanical transmission efficiency but complex operation and higher failure rates; Wet clutches use automatic transmission oil-immersed friction plates with lower mechanical transmission efficiency but easier operation and lower failure rates. Additional information: 1. DCT refers to dual-clutch transmissions, which belong to both manual and automatic transmissions. 2. Advantages of dual-clutch transmissions include: seamless gear shifting; reduced fuel consumption; stronger vehicle acceleration; and the ability to skip downshift in manual control mode.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.